openwrtv3/target/linux/pistachio/patches-4.9/411-mtd-nand-Check-length-of-ID-before-reading-bits-per-.patch
Ian Pozella 52c17bff3c pistachio: add 4.9 kernel support
This adds kernel support for the Pistachio SoC and the Marduk (Ci40)
board which uses it.

Much of the code for Pistachio has been upstreamed however some
patches are still required to boot from the Marduk board:
 * spi bug fixes
 * dma bug fixes
 * pistachio internal clock tree bug fixes
 * spi-nand implementation
 * dts based mtd device naming scheme
 * dts backports and bug fixes

Signed-off-by: Abhijit Mahajani <Abhijit.Mahajani@imgtec.com>
Signed-off-by: Francois Berder <francois.berder@imgtec.com>
Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
2017-03-22 11:43:22 +01:00

38 lines
1.5 KiB
Diff

From 42ebff638003be18fab503b37de4ad7853244e95 Mon Sep 17 00:00:00 2001
From: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Date: Sat, 25 Feb 2017 15:58:22 +0000
Subject: mtd: nand: Check length of ID before reading bits per cell
The table-based NAND identification currently reads the number
of bits per cell from the 3rd byte of the extended ID. This is done
for the so-called 'full ID' devices; i.e. devices that have a known
length ID.
However, if the ID length is shorter than three, there's no 3rd byte,
and so it's wrong to read the bits per cell from there. Fix this by
adding a check for the ID length.
(picked from http://lists.infradead.org/pipermail/linux-mtd/2014-December/056764.html)
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
---
drivers/mtd/nand/nand_base.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 3bde96a..69b5cac 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3964,7 +3964,8 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
mtd->erasesize = type->erasesize;
mtd->oobsize = type->oobsize;
- chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
+ if (type->id_len > 2)
+ chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
chip->chipsize = (uint64_t)type->chipsize << 20;
chip->options |= type->options;
chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
--
2.7.4