openwrtv3/target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch
Jonas Gorski 52b0935efe brcm63xx: use dtb board detection for HW556
This requires individual images for each board version for now.
Linux partition was shrunk to ensure writing thewrong image won't
erase wifi calibration data.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42126
2014-08-11 11:37:14 +00:00

106 lines
1.9 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -91,6 +91,93 @@ static struct board_info __initdata boar
#endif /* CONFIG_BCM63XX_CPU_3368 */
/*
+ * known 6318 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6318
+static struct board_info __initdata board_96318ref = {
+ .name = "96318REF",
+ .expected_cpu_id = 0x6318,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+
+ .has_usbd = 1,
+
+ .usbd = {
+ .use_fullspeed = 0,
+ .port_no = 0,
+ },
+
+ .has_enetsw = 1,
+
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "96318REF:red:post-failed",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ {
+ .name = "96318REF:green:inet",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "96318REF:red:inet-fail",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "wps",
+ .gpio = 33,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "reset",
+ .gpio = 34,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+#endif /* CONFIG_BCM63XX_CPU_6318 */
+
+/*
* known 6328 boards
*/
#ifdef CONFIG_BCM63XX_CPU_6328
@@ -4372,6 +4459,9 @@ static const struct board_info __initcon
#ifdef CONFIG_BCM63XX_CPU_3368
&board_cvg834g,
#endif
+#ifdef CONFIG_BCM63XX_CPU_6318
+ &board_96318ref,
+#endif
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
&board_AR5381u,