openwrtv3/target/linux/ramips/base-files/etc/diag.sh
Rosen Penev c60a21532b ramips: Add support for the GnuBee Personal Cloud Two
The GnuBee Personal Cloud Two crowdfunded on https://www.crowdsupply.com
It is a low-cost, low-power, network-attached storage device.

Specifications:

- SoC: MediaTek MT7621AT
- RAM: DDR3 512 MB
- Flash: 32 MB
- Six SATA ports for 3.5" Drives
- One SDcard
- One USB 3.0
- Two USB 2.0
- Gigabit Ethernet: Three Ports
- UART 3.5mm Audio Jack or 3 pin header - 57600 8N1
- Three GPIOs available on a pin header

Flash instructions:

The GnuBee Personal Cloud Two ships with libreCMC installed.
libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt.
As such one can upgrade using the webinterface or sysupgrade.

Das U-Boot has multiple options for recovery or updates including :

- USB
- http
- tftp

Errata:
- While there are three ethernet ports, the third requires support for
  the second GMAC. This will come in kernel 4.14.
- The first hard drive slot has a clearance issue with the two fan
  headers. Workaround is to pull the headers out and connect the pins to
  jumper wires.
- Using this device as a NAS is problematic with the 4.9 kernel as many
  /dev/sdX reads throw silent errors. The current theory behind this is
  some kind of unhandled DMA mapping error in the kernel. This is not an
  issue with kernel 4.4.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-02-13 10:01:52 +01:00

348 lines
5.2 KiB
Bash

#!/bin/sh
# Copyright (C) 2010-2013 OpenWrt.org
. /lib/functions.sh
. /lib/functions/leds.sh
get_status_led() {
board=$(board_name)
boardname="${board##*,}"
case $board in
3g150b|\
3g300m|\
w150m)
status_led="$boardname:blue:ap"
;;
3g-6200n|\
ar670w|\
ar725w|\
br-6475nd|\
c50|\
dch-m225|\
dir-860l-b1|\
e1700|\
ex2700|\
ex3700|\
fonera20n|\
firewrt|\
hg255d|\
kn|\
kn_rc|\
kn_rf|\
kng_rc|\
mzk-750dhp|\
mzk-dp150n|\
mzk-w300nh2|\
nbg-419n|\
nbg-419n2|\
pwh2004|\
r6220|\
tplink,c20-v4|\
tplink,c50-v3|\
tplink,tl-mr3420-v5|\
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13|\
vr500|\
wnce2001|\
wndr3700v5|\
x5|\
x8|\
xdxrn502j|\
wn3000rpv3)
status_led="$boardname:green:power"
;;
3g-6200nl)
status_led="$boardname:green:internet"
;;
a5-v11|\
cs-qr10|\
d105|\
dcs-930l-b1|\
hlk-rm04|\
jhr-n825r|\
mpr-a1|\
mpr-a2|\
mzk-ex750np)
status_led="$boardname:red:power"
;;
ai-br100|\
ht-tm02)
status_led="$boardname:blue:wlan"
;;
alfa-network,ac1200rm|\
awapn2403|\
dir-645|\
sk-wb8|\
wrh-300cr)
status_led="$boardname:green:wps"
;;
all0239-3g|\
dcs-930|\
dir-300-b1|\
dir-300-b7|\
dir-320-b1|\
dir-600-b1|\
dir-610-a1|\
dir-615-d|\
dir-615-h1|\
dir-620-a1|\
dir-620-d1|\
dwr-512-b|\
gb-pc1|\
gb-pc2|\
hpm|\
hw550-3g|\
mac1200rv2|\
miniembwifi|\
mofi3500-3gn|\
rut5xx|\
v11st-fe|\
wmr-300|\
zbt-wg2626)
status_led="$boardname:green:status"
;;
asl26555-8M|\
asl26555-16M)
status_led="asl26555:green:power"
;;
atp-52b|\
ew1200|\
ip2202)
status_led="$boardname:green:run"
;;
c108)
status_led="$boardname:green:lan"
;;
cf-wr800n|\
psg1208)
status_led="$boardname:white:wps"
;;
psg1218a|\
psg1218b)
status_led="$boardname:yellow:status"
;;
cy-swr1100|\
w502u)
status_led="$boardname:blue:wps"
;;
d240|\
dap-1350|\
na930|\
d-team,newifi-d2|\
pbr-m1|\
re350-v1|\
rt-ac51u|\
rt-n13u|\
rt-n14u|\
rt-n15|\
rt-n56u|\
tplink,c20-v1|\
wl-330n|\
wl-330n3g|\
wli-tx4-ag300n|\
y1|\
y1s|\
youku-yk1)
status_led="$boardname:blue:power"
;;
db-wrt01|\
esr-9753|\
pbr-d1)
status_led="$boardname:orange:power"
;;
f5d8235-v1)
status_led="$boardname:blue:wired"
;;
f5d8235-v2)
status_led="$boardname:blue:router"
;;
f7c027|\
timecloud)
status_led="$boardname:orange:status"
;;
hc5*61|\
hc5661a|\
jhr-n805r|\
jhr-n926r|\
mlw221|\
mlwg2|\
vonets,var11n-300)
status_led="$boardname:blue:system"
;;
hc5962)
status_led="$boardname:white:status"
;;
k2p|\
m3|\
mir3g|\
miwifi-nano)
status_led="$boardname:blue:status"
;;
linkits7688)
status_led="linkit-smart-7688:orange:wifi"
;;
m2m)
status_led="$boardname:blue:wifi"
;;
gl-mt300n-v2)
status_led="$boardname:red:wlan"
;;
m4-4M|\
m4-8M)
status_led="m4:blue:status"
;;
miwifi-mini|\
zte-q7)
status_led="$boardname:red:status"
;;
mr-102n)
status_led="$boardname:amber:status"
;;
mr200)
status_led="$boardname:white:power"
;;
nw718)
status_led="$boardname:amber:cpu"
;;
newifi-d1)
status_led="$boardname:blue:status"
;;
omega2| \
omega2p)
status_led="$boardname:amber:system"
;;
oy-0001|\
sl-r7205)
status_led="$boardname:green:wifi"
;;
psr-680w)
status_led="$boardname:red:wan"
;;
px-4885-4M|\
px-4885-8M)
status_led="px-4885:orange:wifi"
;;
re6500|\
whr-1166d|\
whr-600d)
status_led="$boardname:orange:wifi"
;;
mzk-ex300np|\
rt-n10-plus|\
tew-638apb-v2|\
tew-691gr|\
tew-692gr|\
ur-326n4g|\
ur-336un|\
wf-2881)
status_led="$boardname:green:wps"
;;
rb750gr3)
status_led="$boardname:blue:pwr"
;;
sap-g3200u3)
status_led="$boardname:green:usb"
;;
u25awf-h1)
status_led="u25awf:red:wifi"
;;
u7621-06-256M-16M)
status_led="u7621-06:green:status"
;;
u7628-01-128M-16M)
status_led="u7628-01:green:power"
;;
v22rw-2x2)
status_led="$boardname:green:security"
;;
vocore-8M|\
vocore-16M)
status_led="vocore:green:status"
;;
vocore2)
status_led="$boardname:fuchsia:status"
;;
vocore2lite)
status_led="$boardname:green:status"
;;
w306r-v20|\
witi|\
zbt-wr8305rt)
status_led="$boardname:green:sys"
;;
wcr-1166ds|\
whr-300hp2|\
wsr-1166|\
wsr-600)
status_led="$boardname:green:power"
;;
wcr-150gn|\
wl-351)
status_led="$boardname:amber:power"
;;
whr-g300n|\
wlr-6000|\
zbt-we2026)
status_led="$boardname:red:power"
;;
widora,neo-16m|\
widora,neo-32m)
status_led="widora:orange:wifi"
;;
wzr-agl300nh)
status_led="$boardname:green:router"
;;
wizfi630a)
status_led="$boardname::run"
;;
wr512-3gn-4M|\
wr512-3gn-8M)
status_led="wr512-3gn:green:wps"
;;
wrtnode2r | \
wrtnode2p | \
wrtnode)
status_led="wrtnode:blue:indicator"
;;
wt3020-4M|\
wt3020-8M)
status_led="wt3020:blue:power"
;;
zbt-cpe102)
status_led="$boardname:green:4g-0"
;;
zbt-we826-16M|\
zbt-we826-32M)
status_led="zbt-we826:green:power"
;;
zbtlink,zbt-we1226)
status_led="$boardname:green:wlan"
;;
zbt-wg3526-16M|\
zbt-wg3526-32M)
status_led="zbt-wg3526:green:status"
;;
esac
}
set_state() {
get_status_led $1
case "$1" in
preinit)
status_led_blink_preinit
;;
failsafe)
status_led_blink_failsafe
;;
upgrade | \
preinit_regular)
status_led_blink_preinit_regular
;;
done)
status_led_on
;;
esac
}