openwrtv3/target/linux/ramips
Mathias Kresin 51bca43f39 ramips: fix edimax 6200nl switch config
With 3a9752bbd2 and later changes to
ramips_set_preinit_iface() the default vlan config applied during
preinit was changed. These changes were made without updating the
default network config to ensure that vlan interfaces used for lan/wan
are still configured.

Fix the issue by using the default all LAN portmap and disabling not
connected switch ports using portdisable device tree parameter.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-15 09:01:45 +02:00
..
base-files ramips: fix edimax 6200nl switch config 2016-10-15 09:01:45 +02:00
dts ramips: fix edimax 6200nl switch config 2016-10-15 09:01:45 +02:00
image ramips: add support for Zyxel NBG-419N2 (WAP3205v2) 2016-10-04 11:50:51 +02:00
mt7620 ramips: enable 4K sector support in kernel config 2016-09-13 22:06:08 +02:00
mt7621 ramips: fix wrong blocksizes 2016-09-15 09:53:37 +02:00
mt7628 ramips: switch from 24kec to 24kc 2016-08-08 11:29:56 +02:00
mt7688 ramips: switch from 24kec to 24kc 2016-08-08 11:29:56 +02:00
patches-4.4 kernel: update to v4.4.23 2016-09-30 20:08:21 +02:00
rt288x ramips: fix the number of uarts for each SoC 2016-06-03 12:20:33 +02:00
rt305x ramips: enable 4K sector support in kernel config 2016-09-13 22:06:08 +02:00
rt3883 ramips: enable 4K sector support in kernel config 2016-09-13 22:06:08 +02:00
Makefile build: fix subtarget descriptions 2016-09-04 13:35:11 +02:00
modules.mk ramips: modify audio kernel module and add dma options 2016-07-11 14:19:47 +02:00