openwrtv3/target/linux/apm821xx/base-files/etc/board.d/01_leds
Chris Blake f478ec2007 apm821xx: Add support for the Cisco Meraki MX60/MX60W
This patch adds support for the Cisco Meraki MX60/MX60W Security
Appliance. Flashing information can be found at
https://github.com/riptidewave93/LEDE-MX60

Specs are as follows:
AppliedMicro APM82181 SoC at 800MHz
1GiB NAND - Samsung K9K8G08U0D
512MB DDR RAM - 4x Nanya NT5TU128M8GE-AC
Atheros AR8327-BL1A Gigabit Ethernet Switch
1x USB 2.0 Port

More info can be found at https://wiki.openwrt.org/toh/meraki/mx60

Cc: Christian Lamparter <chunkeey@gmail.com>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-11-21 10:14:15 +01:00

46 lines
1.4 KiB
Bash
Executable file

#!/bin/sh
. /lib/functions/uci-defaults.sh
. /lib/apm821xx.sh
board_config_update
board=$(apm821xx_board_name)
case "$board" in
mr24)
ucidef_set_led_netdev "wan" "WAN" "mr24:green:wan" "eth0"
ucidef_set_led_wlan "wlan1" "WLAN1" "mr24:green:wifi1" "phy0assoc"
ucidef_set_led_wlan "wlan2" "WLAN2" "mr24:green:wifi2" "phy0assoc"
ucidef_set_led_wlan "wlan3" "WLAN3" "mr24:green:wifi3" "phy0assoc"
ucidef_set_led_wlan "wlan4" "WLAN4" "mr24:green:wifi4" "phy0tpt"
;;
mx60)
ucidef_set_led_switch "wan" "WAN" "mx60:green:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "mx60:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "mx60:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "mx60:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "mx60:green:lan4" "switch0" "0x02"
;;
mbl)
ucidef_set_led_ide "sata" "SATA" "mbl:blue:power"
;;
wndr4700)
ucidef_set_led_ide "sata" "SATA" "wndr4700:green:hd"
ucidef_set_led_switch "wan_green" "WAN (green)" "wndr4700:green:wan" "switch0" "0x20"
ucidef_set_led_netdev "wan_yellow" "WAN (yellow)" "wndr4700:yellow:wan" "eth0.2" "tx rx"
ucidef_set_led_usbport "usb3" "USB3" "wndr4700:blue:usb" "usb2-port1" "usb2-port2" "usb3-port1" "usb3-port2"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "wndr4700:blue:wlan" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "wndr4700:blue:wlan" "phy1tpt"
;;
*)
;;
esac
board_config_flush
exit 0