openwrtv3/target/linux/brcm63xx/patches-3.18/570-board_HG655b.patch
Jonas Gorski 509c3211d6 brcm63xx: Add Huawei HG655b support
This patch adds support for the Huawei HG655b.

Nothing much special in this router, it's just another BCM6368 with
a Ralink RT3062 wifi chip and the calibration data embedded in the
main flash chip at offset 0x7c0000. There is also configuration data
used by the OEM firmware before the cal_data partition, this area is
protected by the board_data partition in this patch.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45708
2015-05-21 19:31:54 +00:00

72 lines
1.6 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1928,6 +1928,53 @@
.spis = DGND3700v1_3800B_spi_devices,
.num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices),
+};
+
+static struct board_info __initdata board_HG655b = {
+ .name = "HW65x",
+ .expected_cpu_id = 0x6368,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_caldata = 1,
+ .caldata = {
+ {
+ .vendor = PCI_VENDOR_ID_RALINK,
+ .caldata_offset = 0x7c0000,
+ .slot = 1,
+ .eeprom = "rt2x00.eeprom",
+ },
+ },
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "port1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "port2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "port3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "port4",
+ },
+ },
+ },
};
static struct sprom_fixup __initdata vr3025u_fixups[] = {
@@ -2380,6 +2427,7 @@
&board_96368mvwg,
&board_96368mvngr,
&board_DGND3700v1_3800B,
+ &board_HG655b,
&board_P870HW51A_V2,
&board_VR3025u,
&board_VR3025un,
@@ -2483,6 +2531,7 @@
{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ { .compatible = "huawei,hg655b", .data = &board_HG655b, },
{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
{ .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
#endif