openwrtv3/target/linux/ipq806x/image/Makefile
Jonas Gorski d9197d8b0c ipq806x: fix BOARD_NAME spellings
the board names used by the upgrade check differ from the device names
in case, so always set them. We can't rely on tolower or similar since
different locales might have different rules for lower case letters, so
set them explicitily.

Fixes sysupgrade rejecting *-sysupgrade.tar because of the difference.

Signed-off-by: Kaspar Schleiser <kaspar@schleiser.de>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47381
2015-11-04 11:33:31 +00:00

126 lines
3.1 KiB
Makefile

# Copyright (c) 2014 The Linux Foundation. All rights reserved.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
UBIFS_OPTS = -m 2048 -e 124KiB -c 4096 -U -F
UBINIZE_OPTS = -m 2048 -p 128KiB
KERNEL_LOADADDR := 0x42208000
define Image/Prepare
$(CP) $(LINUX_DIR)/vmlinux $(KDIR)/$(IMG_PREFIX)-vmlinux.elf
mkimage -A arm -O linux -T filesystem -C none \
-a $(KERNEL_LOADADDR) -e $(KERNEL_LOADADDR) \
-n 'ARM OpenWrt fakeroot' \
-s $(KDIR_TMP)/root.dummy-uImage.tmp
echo -ne '\xff' > $(KDIR_TMP)/root.dummy
cat $(KDIR_TMP)/root.dummy $(KDIR_TMP)/root.dummy-uImage.tmp > $(KDIR)/root.dummy
endef
define Image/BuildKernel
$(CP) $(KDIR)/$(IMG_PREFIX)-vmlinux.elf $(BIN_DIR)
endef
define Image/Build/squashfs
cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
endef
define Image/Build
$(call Image/Build/$(1),$(1))
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1)-root.img bs=2k conv=sync
endef
define Build/append-dtb
cat $(DTS_DIR)/$(DEVICE_DTS).dtb >> $@
endef
define Build/append-file
cat $(1) >> $@
endef
define Device/Default
PROFILES := Default
KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
DEVICE_DTS :=
KERNEL_PREFIX := $$(IMAGE_PREFIX)
IMAGES :=
KERNEL_IN_UBI :=
BOARD_NAME :=
endef
DEVICE_VARS += DEVICE_DTS KERNEL_IN_UBI BOARD_NAME
define Device/LegacyImage
KERNEL_SUFFIX := -uImage
KERNEL = kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
endef
define Device/FitImage
KERNEL_SUFFIX := -fit-uImage.itb
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/UbiFit
KERNEL_IN_UBI := 1
IMAGES := nand-factory.ubi nand-sysupgrade.tar
IMAGE/nand-factory.ubi := append-ubi
IMAGE/nand-sysupgrade.tar := sysupgrade-nand
endef
define Device/DniImage
PROFILES += $$(DEVICE_NAME)
FILESYSTEMS := squashfs
KERNEL_SUFFIX := -uImage
KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
KERNEL = kernel-bin | append-dtb | pad-to $$$$(($$(KERNEL_SIZE)-2*64-1)) | uImage none | append-file $(KDIR)/root.dummy
KERNEL_NAME := zImage
NETGEAR_BOARD_ID :=
NETGEAR_HW_ID :=
IMAGES := factory.img sysupgrade.tar
IMAGE/factory.img := append-kernel | append-ubi | netgear-dni
IMAGE/sysupgrade.tar = sysupgrade-nand
endef
DEVICE_VARS += KERNEL_SIZE NETGEAR_BOARD_ID NETGEAR_HW_ID DEVICE_BLOCK_SIZE DEVICE_PAGE_SIZE
define Device/AP148
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_DTS := qcom-ipq8064-ap148
BLOCKSIZE := 128KiB
PAGESIZE := 2048
BOARD_NAME := ap148
endef
define Device/AP148-legacy
$(call Device/LegacyImage)
$(call Device/UbiFit)
DEVICE_DTS := qcom-ipq8064-ap148
BLOCKSIZE := 128KiB
PAGESIZE := 2048
BOARD_NAME := ap148
endef
define Device/DB149
$(call Device/FitImage)
DEVICE_DTS := qcom-ipq8064-db149
KERNEL_INSTALL := 1
BOARD_NAME := db149
endef
define Device/R7500
$(call Device/DniImage)
DEVICE_DTS := qcom-ipq8064-r7500
KERNEL_SIZE := 2097152
NETGEAR_BOARD_ID := R7500
NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
BLOCKSIZE := 128KiB
PAGESIZE := 2048
BOARD_NAME := r7500
endef
TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
$(eval $(call BuildImage))