openwrtv3/target/linux/ar71xx
John Crispin 4d6c4994fc ar71xx: Use PHY fixups for Open Mesh MR1750
The delays of PHY/MAC on the MR1750 are done by u-boot and OpenWrt in
different ways. u-boot only modifies the ETH_CFG of the QCA955x based on
the link speed. But OpenWrt can only modify the PHY delays based on the
link speed.

This can lead to communication problems when u-boot initializes the ETH_CFG
for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY
delays to an incompatible value.

Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and
only rely on the AT803x PHY settings.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49031
2016-03-16 09:27:14 +00:00
..
base-files ar71xx: Add support for the OMYlink OMY-X1 2016-03-16 09:26:58 +00:00
files ar71xx: Use PHY fixups for Open Mesh MR1750 2016-03-16 09:27:14 +00:00
generic ar71xx: Add support for the OMYlink OMY-X1 2016-03-16 09:26:58 +00:00
image ar71xx: Add support for the OMYlink OMY-X1 2016-03-16 09:26:58 +00:00
mikrotik ar71xx: add missing kernel symbol (#21849) 2016-02-12 19:55:07 +00:00
nand ar71xx: add missing kernel symbol (#21849) 2016-02-12 19:55:07 +00:00
patches-4.1 ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
patches-4.4 ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x 2016-03-16 09:27:08 +00:00
config-4.1 ar71xx: Add support for the OMYlink OMY-X1 2016-03-16 09:26:58 +00:00
config-4.4 ar71xx: Add support for the OMYlink OMY-X1 2016-03-16 09:26:58 +00:00
Makefile ar71xx: switch to linux 4.1 2015-07-19 17:59:20 +00:00
modules.mk ar71xx: add LED driver NU801 2015-12-11 15:04:57 +00:00