openwrtv3/target/linux/ramips/dts/BR-6475ND.dts
Mathias Kresin 2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00

178 lines
2.7 KiB
Text

/dts-v1/;
#include "rt3883.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "BR-6475ND", "ralink,rt3883-soc";
model = "Edimax BR-6475nD";
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio0 7 1>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio0 9 1>;
linux,input-type = <EV_SW>;
linux,code = <KEY_RFKILL>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "br-6475nd:green:power";
gpios = <&gpio0 10 1>;
};
wlan {
label = "br-6475nd:amber:wlan";
gpios = <&gpio0 11 1>;
};
wlan_5ghz {
label = "br-6475nd:amber:wlan_5ghz";
gpios = <&gpio0 14 1>;
};
};
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x00000000 0x00030000>;
label = "u-boot";
read-only;
};
partition@30000 {
reg = <0x00030000 0x00010000>;
label = "nvram";
read-only;
};
factory: partition@40000 {
reg = <0x00040000 0x00010000>;
label = "factory";
read-only;
};
devdata: partition@50000 {
reg = <0x00050000 0x00020000>;
label = "devdata";
read-only;
};
partition@70000 {
reg = <0x00070000 0x00790000>;
label = "firmware";
};
};
rtl8367 {
compatible = "realtek,rtl8367";
gpio-sda = <&gpio0 5 0>;
gpio-sck = <&gpio0 4 0>;
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
};
/* Unclear if this is the correct gpio setup; the USB ports are
unpopulated on a stock BR-6475nD, even though the hardware exists
and the headers are there. */
/*
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb {
gpio-export,name="usb";
gpio-export,output=<0>;
gpios = <&gpio0 19 0>;
};
};
*/
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
&timer {
status = "okay";
};
&gpio1 {
status = "okay";
};
&uartlite {
status = "okay";
};
&ethernet {
status = "okay";
mtd-mac-address = <&devdata 0x0d>;
port@0 {
mediatek,fixed-link = <1000 1 1 1>;
};
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0>;
};
&pci {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pci_pins>;
pci_pins: pci {
pci {
ralink,group = "pci";
ralink,function = "pci-fnc";
};
};
host-bridge {
pci-bridge@1 {
status = "okay";
wifi@0,0 {
compatible = "pci0,0";
reg = <0x10000 0 0 0 0>;
ralink,5ghz = <0>;
ralink,mtd-eeprom = <&factory 0x8000>;
};
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};