openwrtv3/target/linux/s3c24xx/patches/0049-bq27000-battery-driver.patch.patch

510 lines
14 KiB
Diff
Executable file

From 2bab304b10f077cb88d5b5f5bd7e50c16aac2132 Mon Sep 17 00:00:00 2001
From: mokopatches <mokopatches@openmoko.org>
Date: Fri, 25 Jul 2008 22:21:23 +0100
Subject: [PATCH] bq27000-battery-driver.patch
---
arch/arm/mach-s3c2440/Kconfig | 2 +
arch/arm/mach-s3c2440/mach-gta02.c | 21 ++
drivers/power/Kconfig | 7 +-
drivers/power/Makefile | 1 +
drivers/power/bq27000_battery.c | 375 ++++++++++++++++++++++++++++++++++++
include/linux/bq27000_battery.h | 12 ++
6 files changed, 417 insertions(+), 1 deletions(-)
create mode 100644 drivers/power/bq27000_battery.c
create mode 100644 include/linux/bq27000_battery.h
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 3015aaf..b417f8e 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -79,6 +79,8 @@ config MACH_NEO1973_GTA02
bool "FIC Neo1973 GSM Phone (GTA02 Hardware)"
select CPU_S3C2442
select SENSORS_PCF50633
+ select POWER_SUPPLY
+ select GTA02_HDQ
help
Say Y here if you are using the FIC Neo1973 GSM Phone
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index cea76e7..3816ea5 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -81,6 +81,8 @@
#include <asm/arch/fiq_ipc_gta02.h>
#include "fiq_c_isr.h"
+#include <linux/gta02_hdq.h>
+#include <linux/bq27000_battery.h>
/* arbitrates which sensor IRQ owns the shared SPI bus */
static spinlock_t motion_irq_lock;
@@ -583,6 +585,24 @@ struct platform_device gta02_hdq_device = {
};
#endif
+/* BQ27000 Battery */
+
+struct bq27000_platform_data bq27000_pdata = {
+ .name = "bat",
+ .rsense_mohms = 20,
+ .hdq_read = gta02hdq_read,
+ .hdq_write = gta02hdq_write,
+ .hdq_initialized = gta02hdq_initialized,
+};
+
+struct platform_device bq27000_battery_device = {
+ .name = "bq27000-battery",
+ .dev = {
+ .platform_data = &bq27000_pdata,
+ },
+};
+
+
/* NOR Flash */
#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */
@@ -1271,6 +1291,7 @@ static void __init gta02_machine_init(void)
case GTA02v5_SYSTEM_REV:
case GTA02v6_SYSTEM_REV:
platform_device_register(&gta02_hdq_device);
+ platform_device_register(&bq27000_battery_device);
break;
default:
break;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 0a4515d..feb8b0a 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -49,7 +49,10 @@ config BATTERY_OLPC
help
Say Y to enable support for the battery on the OLPC laptop.
-endif # POWER_SUPPLY
+config BATTERY_BQ27000_HDQ
+ tristate "BQ27000 HDQ battery monitor driver"
+ help
+ Say Y to enable support for the battery on the Neo Freerunner
config GTA02_HDQ
tristate "Neo Freerunner HDQ"
@@ -58,3 +61,5 @@ config GTA02_HDQ
Say Y to enable support for communicating with an HDQ battery
on the Neo Freerunner. You probably want to select
at least BATTERY_BQ27000_HDQ as well
+
+endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 88f227f..d7e87ad 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,5 +20,6 @@ obj-$(CONFIG_APM_POWER) += apm_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
+obj-$(CONFIG_BATTERY_BQ27000_HDQ) += bq27000_battery.o
obj-$(CONFIG_GTA02_HDQ) += gta02_hdq.o
diff --git a/drivers/power/bq27000_battery.c b/drivers/power/bq27000_battery.c
new file mode 100644
index 0000000..d19186a
--- /dev/null
+++ b/drivers/power/bq27000_battery.c
@@ -0,0 +1,375 @@
+/*
+ * Driver for batteries with bq27000 chips inside via HDQ
+ *
+ * Copyright 2008 Openmoko, Inc
+ * Andy Green <andy@openmoko.com>
+ *
+ * based on ds2760 driver, original copyright notice for that --->
+ *
+ * Copyright © 2007 Anton Vorontsov
+ * 2004-2007 Matt Reimer
+ * 2004 Szabolcs Gyurko
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * Author: Anton Vorontsov <cbou@mail.ru>
+ * February 2007
+ *
+ * Matt Reimer <mreimer@vpop.net>
+ * April 2004, 2005, 2007
+ *
+ * Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ * September 2004
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/bq27000_battery.h>
+
+enum bq27000_regs {
+ /* RAM regs */
+ /* read-write after this */
+ BQ27000_CTRL = 0, /* Device Control Register */
+ BQ27000_MODE, /* Device Mode Register */
+ BQ27000_AR_L, /* At-Rate H L */
+ BQ27000_AR_H,
+ /* read-only after this */
+ BQ27000_ARTTE_L, /* At-Rate Time To Empty H L */
+ BQ27000_ARTTE_H,
+ BQ27000_TEMP_L, /* Reported Temperature H L */
+ BQ27000_TEMP_H,
+ BQ27000_VOLT_L, /* Reported Voltage H L */
+ BQ27000_VOLT_H,
+ BQ27000_FLAGS, /* Status Flags */
+ BQ27000_RSOC, /* Relative State of Charge */
+ BQ27000_NAC_L, /* Nominal Available Capacity H L */
+ BQ27000_NAC_H,
+ BQ27000_CACD_L, /* Discharge Compensated H L */
+ BQ27000_CACD_H,
+ BQ27000_CACT_L, /* Temperature Compensated H L */
+ BQ27000_CACT_H,
+ BQ27000_LMD_L, /* Last measured discharge H L */
+ BQ27000_LMD_H,
+ BQ27000_AI_L, /* Average Current H L */
+ BQ27000_AI_H,
+ BQ27000_TTE_L, /* Time to Empty H L */
+ BQ27000_TTE_H,
+ BQ27000_TTF_L, /* Time to Full H L */
+ BQ27000_TTF_H,
+ BQ27000_SI_L, /* Standby Current H L */
+ BQ27000_SI_H,
+ BQ27000_STTE_L, /* Standby Time To Empty H L */
+ BQ27000_STTE_H,
+ BQ27000_MLI_L, /* Max Load Current H L */
+ BQ27000_MLI_H,
+ BQ27000_MLTTE_L, /* Max Load Time To Empty H L */
+ BQ27000_MLTTE_H,
+ BQ27000_SAE_L, /* Available Energy H L */
+ BQ27000_SAE_H,
+ BQ27000_AP_L, /* Available Power H L */
+ BQ27000_AP_H,
+ BQ27000_TTECP_L, /* Time to Empty at Constant Power H L */
+ BQ27000_TTECP_H,
+ BQ27000_CYCL_L, /* Cycle count since learning cycle H L */
+ BQ27000_CYCL_H,
+ BQ27000_CYCT_L, /* Cycle Count Total H L */
+ BQ27000_CYCT_H,
+ BQ27000_CSOC, /* Compensated State Of Charge */
+ /* EEPROM regs */
+ /* read-write after this */
+ BQ27000_EE_EE_EN = 0x6e, /* EEPROM Program Enable */
+ BQ27000_EE_ILMD = 0x76, /* Initial Last Measured Discharge High Byte */
+ BQ27000_EE_SEDVF, /* Scaled EDVF Threshold */
+ BQ27000_EE_SEDV1, /* Scaled EDV1 Threshold */
+ BQ27000_EE_ISLC, /* Initial Standby Load Current */
+ BQ27000_EE_DMFSD, /* Digital Magnitude Filter and Self Discharge */
+ BQ27000_EE_TAPER, /* Aging Estimate Enable, Charge Termination Taper */
+ BQ27000_EE_PKCFG, /* Pack Configuration Values */
+ BQ27000_EE_IMLC, /* Initial Max Load Current or ID #3 */
+ BQ27000_EE_DCOMP, /* Discharge rate compensation constants or ID #2 */
+ BQ27000_EE_TCOMP, /* Temperature Compensation constants or ID #1 */
+};
+
+enum bq27000_status_flags {
+ BQ27000_STATUS_CHGS = 0x80, /* 1 = being charged */
+ BQ27000_STATUS_NOACT = 0x40, /* 1 = no activity */
+ BQ27000_STATUS_IMIN = 0x20, /* 1 = Lion taper current mode */
+ BQ27000_STATUS_CI = 0x10, /* 1 = capacity likely innacurate */
+ BQ27000_STATUS_CALIP = 0x08, /* 1 = calibration in progress */
+ BQ27000_STATUS_VDQ = 0x04, /* 1 = capacity should be accurate */
+ BQ27000_STATUS_EDV1 = 0x02, /* 1 = end of discharge.. <6% left */
+ BQ27000_STATUS_EDVF = 0x01, /* 1 = no, it's really empty now */
+};
+
+#define NANOVOLTS_UNIT 3750
+
+struct bq27000_device_info {
+ struct device *dev;
+ struct power_supply bat;
+
+ int rsense_mohms; /* from platform */
+
+ int (*hdq_initialized)(void); /* from platform */
+ int (*hdq_read)(int); /* from platform */
+ int (*hdq_write)(int, u8); /* from platform */
+};
+
+/*
+ * reading 16 bit values over HDQ has a special hazard where the
+ * hdq device firmware can update the 16-bit register during the time we
+ * read the two halves. TI document SLUS556D recommends the algorithm here
+ * to avoid trouble
+ */
+
+static int hdq_read16(struct bq27000_device_info *di, int address)
+{
+ int acc;
+ int high;
+ int retries = 3;
+
+ while (retries--) {
+
+ high = (di->hdq_read)(address + 1); /* high part */
+
+ if (high < 0)
+ return high;
+ acc = (di->hdq_read)(address);
+ if (acc < 0)
+ return acc;
+
+ /* confirm high didn't change between reading it and low */
+ if (high == (di->hdq_read)(address + 1))
+ return (high << 8) | acc;
+ }
+
+ return -ETIME;
+}
+
+#define to_bq27000_device_info(x) container_of((x), \
+ struct bq27000_device_info, \
+ bat);
+
+static void bq27000_battery_external_power_changed(struct power_supply *psy)
+{
+ struct bq27000_device_info *di = to_bq27000_device_info(psy);
+
+ dev_dbg(di->dev, "%s\n", __FUNCTION__);
+}
+
+static int bq27000_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int v, n;
+ struct bq27000_device_info *di = to_bq27000_device_info(psy);
+
+ if (!(di->hdq_initialized)())
+ return -EINVAL;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ v = hdq_read16(di, BQ27000_AI_L);
+ if (v < 0)
+ return v;
+ if (v < 2) { /* no real activity on the battery */
+ if (!hdq_read16(di, BQ27000_TTF_L))
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+ /* power is actually going in or out... */
+ v = (di->hdq_read)(BQ27000_FLAGS);
+ if (v < 0)
+ return v;
+ if (v & BQ27000_STATUS_CHGS)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ v = hdq_read16(di, BQ27000_VOLT_L);
+ if (v < 0)
+ return v;
+ val->intval = v * 1000; /* mV -> uV */
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ v = (di->hdq_read)(BQ27000_FLAGS);
+ if (v < 0)
+ return v;
+ if (v & BQ27000_STATUS_CHGS)
+ n = -NANOVOLTS_UNIT;
+ else
+ n = NANOVOLTS_UNIT;
+ v = hdq_read16(di, BQ27000_AI_L);
+ if (v < 0)
+ return v;
+ val->intval = (v * n) / di->rsense_mohms;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ v = hdq_read16(di, BQ27000_LMD_L);
+ if (v < 0)
+ return v;
+ val->intval = (v * 3570) / di->rsense_mohms;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ v = hdq_read16(di, BQ27000_TEMP_L);
+ if (v < 0)
+ return v;
+ /* K (in 0.25K units) is 273.15 up from C (in 0.1C)*/
+ /* 10926 = 27315 * 4 / 10 */
+ val->intval = (((long)v * 10l) - 10926) / 4;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = (di->hdq_read)(BQ27000_RSOC);
+ if (val->intval < 0)
+ return val->intval;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ v = (di->hdq_read)(BQ27000_RSOC);
+ val->intval = !(v < 0);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ v = hdq_read16(di, BQ27000_TTE_L);
+ if (v < 0)
+ return v;
+ val->intval = 60 * v;
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+ v = hdq_read16(di, BQ27000_TTF_L);
+ if (v < 0)
+ return v;
+ val->intval = 60 * v;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property bq27000_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_CAPACITY
+};
+
+static int bq27000_battery_probe(struct platform_device *pdev)
+{
+ int retval = 0;
+ struct bq27000_device_info *di;
+ struct bq27000_platform_data *pdata;
+
+ dev_info(&pdev->dev, "BQ27000 Battery Driver (C) 2008 Openmoko, Inc\n");
+
+ di = kzalloc(sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ retval = -ENOMEM;
+ goto di_alloc_failed;
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ pdata = pdev->dev.platform_data;
+ di->dev = &pdev->dev;
+ /* di->w1_dev = pdev->dev.parent; */
+ di->bat.name = pdata->name;
+ di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ di->bat.properties = bq27000_battery_props;
+ di->bat.num_properties = ARRAY_SIZE(bq27000_battery_props);
+ di->bat.get_property = bq27000_battery_get_property;
+ di->bat.external_power_changed =
+ bq27000_battery_external_power_changed;
+ di->hdq_read = pdata->hdq_read;
+ di->hdq_write = pdata->hdq_write;
+ di->rsense_mohms = pdata->rsense_mohms;
+ di->hdq_initialized = pdata->hdq_initialized;
+
+ retval = power_supply_register(&pdev->dev, &di->bat);
+ if (retval) {
+ dev_err(di->dev, "failed to register battery\n");
+ goto batt_failed;
+ }
+
+ return 0;
+
+batt_failed:
+ kfree(di);
+di_alloc_failed:
+ return retval;
+}
+
+static int bq27000_battery_remove(struct platform_device *pdev)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ power_supply_unregister(&di->bat);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int bq27000_battery_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ return 0;
+}
+
+static int bq27000_battery_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+#else
+
+#define bq27000_battery_suspend NULL
+#define bq27000_battery_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct platform_driver bq27000_battery_driver = {
+ .driver = {
+ .name = "bq27000-battery",
+ },
+ .probe = bq27000_battery_probe,
+ .remove = bq27000_battery_remove,
+ .suspend = bq27000_battery_suspend,
+ .resume = bq27000_battery_resume,
+};
+
+static int __init bq27000_battery_init(void)
+{
+ return platform_driver_register(&bq27000_battery_driver);
+}
+
+static void __exit bq27000_battery_exit(void)
+{
+ platform_driver_unregister(&bq27000_battery_driver);
+}
+
+module_init(bq27000_battery_init);
+module_exit(bq27000_battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("bq27000 battery driver");
diff --git a/include/linux/bq27000_battery.h b/include/linux/bq27000_battery.h
new file mode 100644
index 0000000..36b4f20
--- /dev/null
+++ b/include/linux/bq27000_battery.h
@@ -0,0 +1,12 @@
+#ifndef __BQ27000_BATTERY_H__
+#define __BQ27000_BATTERY_H__
+
+struct bq27000_platform_data {
+ const char *name;
+ int rsense_mohms;
+ int (*hdq_read)(int);
+ int (*hdq_write)(int, u8);
+ int (*hdq_initialized)(void);
+};
+
+#endif
--
1.5.6.3