openwrtv3

No description

Find a file

Florian Fainelli 45c9f5e75e update to kernel 2.6.36.4 SVN-Revision: 25580		2011-02-19 12:44:07 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	update to kernel 2.6.36.4	2011-02-19 12:44:07 +00:00
package	upgrade to 2.57	2011-02-19 08:50:15 +00:00
scripts	metadata: fix handling of multiple build dependencies with different conditions	2011-02-13 02:52:22 +00:00
target	update to kernel 2.6.36.4	2011-02-19 12:44:07 +00:00
toolchain	only enable binutils 2.21 for avr32 if BROKEN is selected	2011-02-18 13:48:42 +00:00
tools	squashfs4: make the lzma parameters configurable, and change the defaults for slightly improved compression on mips (mostly unchanged on other architectures)	2011-02-13 19:59:02 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	prepare support for libiconv, libintl stub/full switching	2011-02-02 01:26:19 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
rules.mk	add a variable LIBRPC to refer to the external librpc if used	2011-02-13 01:45:07 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org