openwrtv3/target/linux/ipq806x/patches/0012-devicetree-bindings-Document-qcom-saw2-node.patch
Luka Perkov 02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00

54 lines
1.8 KiB
Diff

From 17adce4d3de1fca7761607d572f4979557f0f604 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Thu, 31 Oct 2013 18:20:30 -0700
Subject: [PATCH 012/182] devicetree: bindings: Document qcom,saw2 node
The saw2 binding describes the SPM/AVS wrapper hardware used to
control the regulator supplying voltage to the Krait CPUs.
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
.../devicetree/bindings/arm/msm/qcom,saw2.txt | 35 ++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
@@ -0,0 +1,35 @@
+SPM AVS Wrapper 2 (SAW2)
+
+The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
+Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
+micro-controller that transitions a piece of hardware (like a processor or
+subsystem) into and out of low power modes via a direct connection to
+the PMIC. It can also be wired up to interact with other processors in the
+system, notifying them when a low power state is entered or exited.
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: shall contain "qcom,saw2". A more specific value should be
+ one of:
+ "qcom,saw2-v1"
+ "qcom,saw2-v1.1"
+ "qcom,saw2-v2"
+ "qcom,saw2-v2.1"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the first element specifies the base address and size of
+ the register region. An optional second element specifies
+ the base address and size of the alias register region.
+
+
+Example:
+
+ regulator@2099000 {
+ compatible = "qcom,saw2";
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+ };