openwrtv3/target/linux/zynq/image/mkits.sh
John Crispin 2d45ad07fc zynq: add new target
Add support for Xilinx ZC702 Dev board

Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.

Patch is tested with Xilinx ZC702 Dev board with SD boot mode.

known issues:
 - no QSPI driver in 4.4 kernel: no QSPI flash support
 - USB is not working in 4.4 kernel

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

 create mode 100644 package/boot/uboot-zynq/Makefile
 create mode 100644 target/linux/zynq/Makefile
 create mode 100644 target/linux/zynq/base-files.mk
 create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network
 create mode 100644 target/linux/zynq/base-files/etc/config/network
 create mode 100644 target/linux/zynq/base-files/etc/inittab
 create mode 100644 target/linux/zynq/config-4.4
 create mode 100644 target/linux/zynq/image/Makefile
 create mode 100755 target/linux/zynq/image/mkits.sh
 create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch
 create mode 100644 target/linux/zynq/profiles/zc702.mk

SVN-Revision: 48697
2016-02-12 08:29:24 +00:00

150 lines
3.6 KiB
Bash
Executable file

#!/bin/bash
#
# Licensed under the terms of the GNU GPL License version 2 or later.
#
# Author: Peter Tyser <ptyser@xes-inc.com>
#
# U-Boot firmware supports the booting of images in the Flattened Image
# Tree (FIT) format. The FIT format uses a device tree structure to
# describe a kernel image, device tree blob, ramdisk, etc. This script
# creates an Image Tree Source (.its file) which can be passed to the
# 'mkimage' utility to generate an Image Tree Blob (.itb file). The .itb
# file can then be booted by U-Boot (or other bootloaders which support
# FIT images). See doc/uImage.FIT/howto.txt in U-Boot source code for
# additional information on FIT images.
#
usage() {
echo "Usage: `basename $0` -A arch -C comp -a addr -e entry" \
"-v version -k kernel [-D name -d dtb] -o its_file"
echo -e "\t-A ==> set architecture to 'arch'"
echo -e "\t-C ==> set compression type 'comp'"
echo -e "\t-a ==> set load address to 'addr' (hex)"
echo -e "\t-e ==> set entry point to 'entry' (hex)"
echo -e "\t-v ==> set kernel version to 'version'"
echo -e "\t-k ==> include kernel image 'kernel'"
echo -e "\t-D ==> human friendly Device Tree Blob 'name'"
echo -e "\t-d ==> include Device Tree Blob 'dtb'"
echo -e "\t-r ==> include ramdisk"
echo -e "\t-z ==> ramdisk compression type"
echo -e "\t-o ==> create output file 'its_file'"
exit 1
}
while getopts ":A:a:C:D:d:e:k:o:v:r:z:" OPTION
do
case $OPTION in
A ) ARCH=$OPTARG;;
a ) LOAD_ADDR=$OPTARG;;
C ) COMPRESS=$OPTARG;;
D ) DEVICE=$OPTARG;;
d ) DTB=$OPTARG;;
e ) ENTRY_ADDR=$OPTARG;;
k ) KERNEL=$OPTARG;;
o ) OUTPUT=$OPTARG;;
v ) VERSION=$OPTARG;;
r ) RAMDISK=$OPTARG;;
z ) RD_COMPRESS=$OPTARG;;
* ) echo "Invalid option passed to '$0' (options:$@)"
usage;;
esac
done
# Make sure user entered all required parameters
if [ -z "${ARCH}" ] || [ -z "${COMPRESS}" ] || [ -z "${LOAD_ADDR}" ] || \
[ -z "${ENTRY_ADDR}" ] || [ -z "${VERSION}" ] || [ -z "${KERNEL}" ] || \
[ -z "${OUTPUT}" ]; then
usage
fi
ARCH_UPPER=`echo $ARCH | tr '[:lower:]' '[:upper:]'`
# Conditionally create fdt information
if [ -n "${DTB}" ]; then
FDT="
fdt@1 {
description = \"${ARCH_UPPER} OpenWrt ${DEVICE} device tree blob\";
data = /incbin/(\"${DTB}\");
type = \"flat_dt\";
arch = \"${ARCH}\";
compression = \"none\";
hash@1 {
algo = \"crc32\";
};
hash@2 {
algo = \"sha1\";
};
};
"
CONF=" fdt = \"fdt@1\";"
fi
# Conditionally create ramdisk node
if [ -n "${RAMDISK}" ]; then
RD_COMPRESS=${RD_COMPRESS:-none}
RD="
ramdisk@1 {
description = \"${ARCH_UPPER} OpenWrt ${DEVICE} ramdisk\";
data = /incbin/(\"${RAMDISK}\");
type = \"ramdisk\";
arch = \"${ARCH}\";
os = \"linux\";
compression = \"${RD_COMPRESS}\";
hash@1 {
algo = \"crc32\";
};
hash@2 {
algo = \"sha1\";
};
};
"
if [ -z "${CONF}" ]; then
CONF=" ramdisk = \"ramdisk@1\";"
else
CONF="$CONF
ramdisk = \"ramdisk@1\";"
fi
fi
# Create a default, fully populated DTS file
DATA="/dts-v1/;
/ {
description = \"${ARCH_UPPER} OpenWrt FIT (Flattened Image Tree)\";
#address-cells = <1>;
images {
kernel@1 {
description = \"${ARCH_UPPER} OpenWrt Linux-${VERSION}\";
data = /incbin/(\"${KERNEL}\");
type = \"kernel\";
arch = \"${ARCH}\";
os = \"linux\";
compression = \"${COMPRESS}\";
load = <${LOAD_ADDR}>;
entry = <${ENTRY_ADDR}>;
hash@1 {
algo = \"crc32\";
};
hash@2 {
algo = \"sha1\";
};
};
${RD}
${FDT}
};
configurations {
default = \"config@1\";
config@1 {
description = \"OpenWrt\";
kernel = \"kernel@1\";
${CONF}
};
};
};"
# Write .its file to disk
echo "$DATA" > ${OUTPUT}