KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/package/kernel/mac80211/patches/357-0004-brcmfmac-fix-handling-ssids-in-.sched_scan_start-cal.patch
Rafał Miłecki 863a06b0a4 mac80211: brcmfmac: backport scheduled scan cleanup and chip support 
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-02 09:49:35 +01:00

221 lines
6.6 KiB
Diff
Raw Blame History

From 3e2e86ab19c2a43953de30089c5411c580ddb5f7 Mon Sep 17 00:00:00 2001
From: Arend Van Spriel <arend.vanspriel@broadcom.com>
Date: Wed, 23 Nov 2016 10:25:23 +0000
Subject: [PATCH] brcmfmac: fix handling ssids in .sched_scan_start() callback
The ssids list in the scheduled scan request were not properly taken
into account when configuring in firmware. The hidden bit was set for
any ssid resulting in active scanning for all. Only set it for ssids
that are in the ssids list.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 103 ++++++++++-----------
.../net/wireless/broadcom/brcm80211/brcmfmac/pno.c | 18 ++++
.../net/wireless/broadcom/brcm80211/brcmfmac/pno.h | 12 ++-
3 files changed, 76 insertions(+), 57 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3314,19 +3314,37 @@ out_err:
return err;
}
+static bool brcmf_is_ssid_active(struct cfg80211_ssid *ssid,
+ struct cfg80211_sched_scan_request *req)
+{
+ int i;
+
+ if (!ssid || !req->ssids || !req->n_ssids)
+ return false;
+
+ for (i = 0; i < req->n_ssids; i++) {
+ if (ssid->ssid_len == req->ssids[i].ssid_len) {
+ if (!strncmp(ssid->ssid, req->ssids[i].ssid,
+ ssid->ssid_len))
+ return true;
+ }
+ }
+ return false;
+}
+
static int
brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
struct net_device *ndev,
- struct cfg80211_sched_scan_request *request)
+ struct cfg80211_sched_scan_request *req)
{
struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
- struct brcmf_pno_net_param_le pfn;
+ struct cfg80211_ssid *ssid;
int i;
int ret = 0;
brcmf_dbg(SCAN, "Enter n_match_sets:%d n_ssids:%d\n",
- request->n_match_sets, request->n_ssids);
+ req->n_match_sets, req->n_ssids);
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
brcmf_err("Scanning already: status (%lu)\n", cfg->scan_status);
return -EAGAIN;
@@ -3337,71 +3355,46 @@ brcmf_cfg80211_sched_scan_start(struct w
return -EAGAIN;
}
- if (!request->n_ssids || !request->n_match_sets) {
- brcmf_dbg(SCAN, "Invalid sched scan req!! n_ssids:%d\n",
- request->n_ssids);
+ if (req->n_match_sets <= 0) {
+ brcmf_dbg(SCAN, "invalid number of matchsets specified: %d\n",
+ req->n_match_sets);
return -EINVAL;
}
- if (request->n_ssids > 0) {
- for (i = 0; i < request->n_ssids; i++) {
- /* Active scan req for ssids */
- brcmf_dbg(SCAN, ">>> Active scan req for ssid (%s)\n",
- request->ssids[i].ssid);
-
- /* match_set ssids is a supert set of n_ssid list,
- * so we need not add these set separately.
- */
- }
+ /* clean up everything */
+ ret = brcmf_pno_clean(ifp);
+ if (ret < 0) {
+ brcmf_err("failed error=%d\n", ret);
+ return ret;
}
- if (request->n_match_sets > 0) {
- /* clean up everything */
- ret = brcmf_pno_clean(ifp);
- if (ret < 0) {
- brcmf_err("failed error=%d\n", ret);
- return ret;
+ /* configure pno */
+ ret = brcmf_pno_config(ifp, req);
+ if (ret < 0)
+ return ret;
+
+ /* configure each match set */
+ for (i = 0; i < req->n_match_sets; i++) {
+
+ ssid = &req->match_sets[i].ssid;
+
+ if (!ssid->ssid_len) {
+ brcmf_err("skip broadcast ssid\n");
+ continue;
}
- /* configure pno */
- ret = brcmf_pno_config(ifp, request);
+ ret = brcmf_pno_add_ssid(ifp, ssid,
+ brcmf_is_ssid_active(ssid, req));
if (ret < 0)
- return ret;
-
- /* configure each match set */
- for (i = 0; i < request->n_match_sets; i++) {
- struct cfg80211_ssid *ssid;
- u32 ssid_len;
-
- ssid = &request->match_sets[i].ssid;
- ssid_len = ssid->ssid_len;
-
- if (!ssid_len) {
- brcmf_err("skip broadcast ssid\n");
- continue;
- }
- pfn.auth = cpu_to_le32(WLAN_AUTH_OPEN);
- pfn.wpa_auth = cpu_to_le32(BRCMF_PNO_WPA_AUTH_ANY);
- pfn.wsec = cpu_to_le32(0);
- pfn.infra = cpu_to_le32(1);
- pfn.flags = cpu_to_le32(1 << BRCMF_PNO_HIDDEN_BIT);
- pfn.ssid.SSID_len = cpu_to_le32(ssid_len);
- memcpy(pfn.ssid.SSID, ssid->ssid, ssid_len);
- ret = brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn,
- sizeof(pfn));
brcmf_dbg(SCAN, ">>> PNO filter %s for ssid (%s)\n",
ret == 0 ? "set" : "failed", ssid->ssid);
- }
- /* Enable the PNO */
- if (brcmf_fil_iovar_int_set(ifp, "pfn", 1) < 0) {
- brcmf_err("PNO enable failed!! ret=%d\n", ret);
- return -EINVAL;
- }
- } else {
- return -EINVAL;
}
+ /* Enable the PNO */
+ ret = brcmf_fil_iovar_int_set(ifp, "pfn", 1);
+ if (ret < 0)
+ brcmf_err("PNO enable failed!! ret=%d\n", ret);
- return 0;
+ return ret;
}
static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.c
@@ -28,6 +28,8 @@
#define BRCMF_PNO_FREQ_EXPO_MAX 3
#define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT 6
#define BRCMF_PNO_SCAN_INCOMPLETE 0
+#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
+#define BRCMF_PNO_HIDDEN_BIT 2
int brcmf_pno_clean(struct brcmf_if *ifp)
{
@@ -98,3 +100,19 @@ int brcmf_pno_config(struct brcmf_if *if
return err;
}
+int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
+ bool active)
+{
+ struct brcmf_pno_net_param_le pfn;
+
+ pfn.auth = cpu_to_le32(WLAN_AUTH_OPEN);
+ pfn.wpa_auth = cpu_to_le32(BRCMF_PNO_WPA_AUTH_ANY);
+ pfn.wsec = cpu_to_le32(0);
+ pfn.infra = cpu_to_le32(1);
+ if (active)
+ pfn.flags = cpu_to_le32(1 << BRCMF_PNO_HIDDEN_BIT);
+ pfn.ssid.SSID_len = cpu_to_le32(ssid->ssid_len);
+ memcpy(pfn.ssid.SSID, ssid->ssid, ssid->ssid_len);
+ return brcmf_fil_iovar_data_set(ifp, "pfn_add", &pfn, sizeof(pfn));
+}
+
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pno.h
@@ -17,8 +17,6 @@
#define _BRCMF_PNO_H
#define BRCMF_PNO_SCAN_COMPLETE 1
-#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF
-#define BRCMF_PNO_HIDDEN_BIT 2
#define BRCMF_PNO_MAX_PFN_COUNT 16
/**
@@ -37,4 +35,14 @@ int brcmf_pno_clean(struct brcmf_if *ifp
int brcmf_pno_config(struct brcmf_if *ifp,
struct cfg80211_sched_scan_request *request);
+/**
+ * brcmf_pno_add_ssid - add ssid for pno in firmware.
+ *
+ * @ifp: interface object used.
+ * @ssid: ssid information.
+ * @active: indicate this ssid needs to be actively probed.
+ */
+int brcmf_pno_add_ssid(struct brcmf_if *ifp, struct cfg80211_ssid *ssid,
+ bool active);
+
#endif /* _BRCMF_PNO_H */
Reference in a new issue View git blame Copy permalink