openwrtv3/target/linux/lantiq/patches-4.9/0153-lantiq-VPE-softdog.patch
Hauke Mehrtens 863e79f8d5 lantiq: add support for kernel 4.9
The following patches were dropped because they are already applied
upstream:
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch
0047-mtd-plat-nand-pass-of-node.patch
0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch
122-MIPS-store-the-appended-dtb-address-in-a-variable.patch

The PHY driver was reduced to the code adding the LED configuration,
the rest is already upstream:
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

The SPI driver was replaced with the version pending for upstream
inclusion:
New driver:
0090-spi-add-transfer_status-callback.patch
0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch
Old driver:
0100-spi-add-support-for-Lantiq-SPI-controller.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:44:13 +01:00

170 lines
5.1 KiB
Diff

--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/vpe.h
@@ -0,0 +1,44 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+#ifndef _IFXMIPS_VPE_H__
+#define _IFXMIPS_VPE_H__
+
+/* For the explanation of the APIs please refer the section "MT APRP Kernel
+ * Programming" in AR9 SW Architecture Specification
+ */
+int32_t vpe1_sw_start(void* sw_start_addr, uint32_t tcmask, uint32_t flags);
+int32_t vpe1_sw_stop(uint32_t flags);
+uint32_t vpe1_get_load_addr (uint32_t flags);
+uint32_t vpe1_get_max_mem (uint32_t flags);
+
+int32_t vpe1_set_boot_param(char *field, char *value, char flags);
+int32_t vpe1_get_boot_param(char *field, char **value, char flags);
+
+/* Watchdog APIs */
+extern unsigned long vpe1_wdog_ctr;
+extern unsigned long vpe1_wdog_timeout;
+
+unsigned long vpe1_sw_wdog_start(unsigned long);
+unsigned long vpe1_sw_wdog_stop(unsigned long);
+
+typedef int (*VPE_SW_WDOG_RESET)(unsigned long wdog_cleared_ok_count);
+int32_t vpe1_sw_wdog_register_reset_handler(VPE_SW_WDOG_RESET reset_fn);
+
+#endif
--- /dev/null
+++ b/arch/mips/lantiq/softdog_vpe.c
@@ -0,0 +1,109 @@
+/*
+** =============================================================================
+** FILE NAME : softdog_vpe.c
+** MODULES : LXDB
+** DATE : 24-03-2008
+** AUTHOR : LXDB Team
+** DESCRIPTION : This header file contains the code for the watchdog
+** implentation on vpe1 side.
+** REFERENCES :
+** COPYRIGHT : Copyright (c) 2008
+** Am Campeon 1-12, 85579 Neubiberg, Germany
+** Any use of this software is subject to the conclusion of a respective
+** License agreement. Without such a License agreement no rights to the
+** software are granted
+**
+** HISTORY :
+** $Date $Author $Comment
+** 24-03-2008 LXDB Initial version
+** ============================================================================
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+
+#include <vpe.h>
+
+static unsigned long last_wdog_value;
+static unsigned long vpe1_wdog_cleared;
+
+static unsigned long vpe1_wdog_dead;
+static void watchdog_vpe0_fire(unsigned long); /* Called when vpe0 timer expires */
+static void keep_alive_vpe0(unsigned long);
+VPE_SW_WDOG_RESET reset_local_fn;
+
+
+static struct timer_list watchdog_vpe0_ticktock =
+ TIMER_INITIALIZER(watchdog_vpe0_fire, 0, 0);
+
+static void watchdog_vpe0_fire (unsigned long flags)
+{
+ volatile unsigned long *wdog_ctr_value;
+ wdog_ctr_value = (void*)vpe1_wdog_ctr;
+ if (*wdog_ctr_value == last_wdog_value) { /* VPE1 watchdog expiry handling */
+ vpe1_sw_wdog_stop(flags);
+ vpe1_wdog_dead++;
+ printk(KERN_DEBUG "VPE1 watchdog reset handler called\n");
+ /* Call the reset handler function */
+ reset_local_fn(flags);
+ } else { /* Everything is OK on vpe1 side. Continue. */
+ last_wdog_value = *wdog_ctr_value;
+ vpe1_wdog_cleared++;
+ keep_alive_vpe0(flags);
+ }
+}
+
+int32_t vpe1_sw_wdog_register_reset_handler (VPE_SW_WDOG_RESET reset_fn)
+{
+ reset_local_fn = (VPE_SW_WDOG_RESET)reset_fn;
+ return 0;
+}
+
+static void keep_alive_vpe0(unsigned long flags)
+{
+ mod_timer(&watchdog_vpe0_ticktock, jiffies+ vpe1_wdog_timeout );
+}
+
+unsigned long vpe1_sw_wdog_start(unsigned long flags)
+{
+ volatile unsigned long *wdog_ctr_value;
+ wdog_ctr_value = (void*)vpe1_wdog_ctr;
+ *wdog_ctr_value = 0;
+ last_wdog_value = 0;
+ keep_alive_vpe0(flags);
+ return 0;
+}
+
+unsigned long vpe1_sw_wdog_stop(unsigned long flags)
+{
+ del_timer(&watchdog_vpe0_ticktock);
+ return 0;
+}
+
+static int __init watchdog_vpe1_init(void)
+{
+ /* Nothing to be done here */
+ return 0;
+}
+
+static void __exit watchdog_vpe1_exit(void)
+{
+ unsigned long flags=0;
+ vpe1_sw_wdog_stop(flags);
+}
+
+module_init(watchdog_vpe1_init);
+module_exit(watchdog_vpe1_exit);
+
+EXPORT_SYMBOL(vpe1_sw_wdog_register_reset_handler);
+EXPORT_SYMBOL(vpe1_sw_wdog_start);
+EXPORT_SYMBOL(vpe1_sw_wdog_stop);
+
+MODULE_AUTHOR("LXDB");
+MODULE_DESCRIPTION("Software Watchdog For VPE1");
+MODULE_LICENSE("GPL");
--- a/arch/mips/lantiq/Makefile
+++ b/arch/mips/lantiq/Makefile
@@ -6,6 +6,8 @@
obj-y := irq.o clk.o prom.o
+obj-$(CONFIG_MIPS_VPE_LOADER) += softdog_vpe.o
+
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SOC_TYPE_XWAY) += xway/