92b5b360fe
Move dts files to files/, remove useless patch chunks Signed-off-by: Felix Fietkau <nbd@nbd.name>
388 lines
7.5 KiB
Text
388 lines
7.5 KiB
Text
#include "qcom-ipq8065-v1.0.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "ZyXEL NBG6817";
|
|
compatible = "zyxel,nbg6817", "qcom,ipq8065";
|
|
|
|
memory@0 {
|
|
reg = <0x42000000 0x1e000000>;
|
|
device_type = "memory";
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
rsvd@41200000 {
|
|
reg = <0x41200000 0x300000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &gsbi4_serial;
|
|
mdio-gpio0 = &mdio0;
|
|
sdcc1 = &sdcc1;
|
|
|
|
led-boot = &power;
|
|
led-failsafe = &power;
|
|
led-running = &power;
|
|
led-upgrade = &power;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "root=/dev/mmcblk0p5 rootfstype=squashfs,ext4 rootwait noinitrd";
|
|
linux,stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
soc {
|
|
pinmux@800000 {
|
|
button_pins: button_pins {
|
|
mux {
|
|
pins = "gpio6", "gpio54", "gpio65";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
i2c4_pins: i2c4_pinmux {
|
|
mux {
|
|
pins = "gpio12", "gpio13";
|
|
function = "gsbi4";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
led_pins: led_pins {
|
|
mux {
|
|
pins = "gpio9", "gpio26", "gpio33", "gpio64";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
mdio0_pins: mdio0_pins {
|
|
mux {
|
|
pins = "gpio0", "gpio1";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
clk {
|
|
pins = "gpio1";
|
|
input-disable;
|
|
};
|
|
};
|
|
|
|
rgmii2_pins: rgmii2_pins {
|
|
mux {
|
|
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
|
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
|
function = "rgmii2";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
tx {
|
|
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
|
|
input-disable;
|
|
};
|
|
};
|
|
|
|
spi_pins: spi_pins {
|
|
mux {
|
|
pins = "gpio18", "gpio19", "gpio21";
|
|
function = "gsbi5";
|
|
drive-strength = <10>;
|
|
bias-none;
|
|
};
|
|
|
|
cs {
|
|
pins = "gpio20";
|
|
drive-strength = <12>;
|
|
};
|
|
};
|
|
|
|
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
|
mux {
|
|
pins = "gpio16", "gpio17";
|
|
function = "gpio";
|
|
drive-strength = <12>;
|
|
};
|
|
|
|
pwr {
|
|
pins = "gpio17";
|
|
bias-pull-down;
|
|
output-high;
|
|
};
|
|
|
|
ovc {
|
|
pins = "gpio16";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
|
mux {
|
|
pins = "gpio14", "gpio15";
|
|
function = "gpio";
|
|
drive-strength = <12>;
|
|
};
|
|
|
|
pwr {
|
|
pins = "gpio14";
|
|
bias-pull-down;
|
|
output-high;
|
|
};
|
|
|
|
ovc {
|
|
pins = "gpio15";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
gsbi@16300000 {
|
|
qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
status = "ok";
|
|
serial@16340000 {
|
|
status = "ok";
|
|
};
|
|
/*
|
|
* The i2c device on gsbi4 should not be enabled.
|
|
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
|
* RPM usage. Turning this on in kernel manifests as
|
|
* i2c failure for the RPM.
|
|
*/
|
|
};
|
|
|
|
gsbi5: gsbi@1a200000 {
|
|
qcom,mode = <GSBI_PROT_SPI>;
|
|
status = "ok";
|
|
|
|
spi4: spi@1a280000 {
|
|
status = "ok";
|
|
|
|
pinctrl-0 = <&spi_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
|
|
|
flash: m25p80@0 {
|
|
compatible = "jedec,spi-nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
spi-max-frequency = <51200000>;
|
|
reg = <0>;
|
|
|
|
linux,part-probe = "qcom-smem";
|
|
};
|
|
};
|
|
};
|
|
|
|
phy@100f8800 { /* USB3 port 1 HS phy */
|
|
status = "ok";
|
|
};
|
|
|
|
phy@100f8830 { /* USB3 port 1 SS phy */
|
|
status = "ok";
|
|
};
|
|
|
|
phy@110f8800 { /* USB3 port 0 HS phy */
|
|
status = "ok";
|
|
};
|
|
|
|
phy@110f8830 { /* USB3 port 0 SS phy */
|
|
status = "ok";
|
|
};
|
|
|
|
usb30@0 {
|
|
status = "ok";
|
|
|
|
pinctrl-0 = <&usb0_pwr_en_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
usb30@1 {
|
|
status = "ok";
|
|
|
|
pinctrl-0 = <&usb1_pwr_en_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
pcie0: pci@1b500000 {
|
|
status = "ok";
|
|
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&pcie0_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
pcie1: pci@1b700000 {
|
|
status = "ok";
|
|
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&pcie1_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
mdio0: mdio {
|
|
compatible = "virtual,mdio-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-0 = <&mdio0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
device_type = "ethernet-phy";
|
|
reg = <0>;
|
|
qca,ar8327-initvals = <
|
|
0x00004 0x7600000 /* PAD0_MODE */
|
|
0x00008 0x1000000 /* PAD5_MODE */
|
|
0x0000c 0x80 /* PAD6_MODE */
|
|
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
|
0x000e0 0xc74164de /* SGMII_CTRL */
|
|
0x0007c 0x4e /* PORT0_STATUS */
|
|
0x00094 0x4e /* PORT6_STATUS */
|
|
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
|
|
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
|
|
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
|
|
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
|
|
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
|
|
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
|
|
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
|
|
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
|
|
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
|
|
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
|
|
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
|
|
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
|
|
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
|
|
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
|
|
>;
|
|
};
|
|
|
|
phy4: ethernet-phy@4 {
|
|
device_type = "ethernet-phy";
|
|
reg = <4>;
|
|
qca,ar8327-initvals = <
|
|
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
|
0x0000c 0x80 /* PAD6_MODE */
|
|
>;
|
|
};
|
|
};
|
|
|
|
gmac1: ethernet@37200000 {
|
|
status = "ok";
|
|
phy-mode = "rgmii";
|
|
qcom,id = <1>;
|
|
qcom,phy_mdio_addr = <4>;
|
|
qcom,poll_required = <0>;
|
|
qcom,rgmii_delay = <1>;
|
|
qcom,phy_mii_type = <0>;
|
|
qcom,emulation = <0>;
|
|
qcom,irq = <255>;
|
|
mdiobus = <&mdio0>;
|
|
|
|
pinctrl-0 = <&rgmii2_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
gmac2: ethernet@37400000 {
|
|
status = "ok";
|
|
phy-mode = "sgmii";
|
|
qcom,id = <2>;
|
|
qcom,phy_mdio_addr = <0>; /* none */
|
|
qcom,poll_required = <0>; /* no polling */
|
|
qcom,rgmii_delay = <0>;
|
|
qcom,phy_mii_type = <1>;
|
|
qcom,emulation = <0>;
|
|
qcom,irq = <258>;
|
|
mdiobus = <&mdio0>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
rpm@108000 {
|
|
pinctrl-0 = <&i2c4_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
amba {
|
|
sdcc1: sdcc@12400000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&button_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
wifi {
|
|
label = "wifi";
|
|
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RFKILL>;
|
|
};
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&led_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
internet {
|
|
label = "nbg6817:white:internet";
|
|
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
power: power {
|
|
label = "nbg6817:white:power";
|
|
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
|
default-state = "keep";
|
|
};
|
|
|
|
wifi2g {
|
|
label = "nbg6817:amber:wifi2g";
|
|
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
/* wifi2g amber from the manual is missing */
|
|
|
|
wifi5g {
|
|
label = "nbg6817:amber:wifi5g";
|
|
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
/* wifi5g amber from the manual is missing */
|
|
};
|
|
};
|
|
|
|
&adm_dma {
|
|
status = "ok";
|
|
};
|