openwrtv3/target/linux/mediatek/patches/0046-usb-phy-add-usb3.0-phy-driver-for-mt65xx-SoCs.patch
John Crispin 25afe99b31 mediatek: add support for the new MT7623 Arm SoC
the support is still WIP. next steps are to make the pmic and ethernet work.
this is the first commit to make sure nothing gets lost.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47354
2015-11-02 10:18:50 +00:00

779 lines
23 KiB
Diff

From cee7c5a343bdecf407c876289327c567bfd34fd4 Mon Sep 17 00:00:00 2001
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: Wed, 27 May 2015 19:48:01 +0800
Subject: [PATCH 46/76] usb: phy: add usb3.0 phy driver for mt65xx SoCs
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/usb/phy/Kconfig | 10 +
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-mt65xx-usb3.c | 724 +++++++++++++++++++++++++++++++++++++
3 files changed, 735 insertions(+)
create mode 100644 drivers/usb/phy/phy-mt65xx-usb3.c
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 2175678..dfca566 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -151,6 +151,16 @@ config USB_MSM_OTG
This driver is not supported on boards like trout which
has an external PHY.
+config USB_MT65XX_USB3_PHY
+ tristate "Mediatek USB3.0 PHY controller Driver"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ select USB_PHY
+ help
+ Say 'Y' here to add support for Mediatek USB3.0 PHY driver
+ for mt65xx SoCs. it supports two usb2.0 ports and
+ one usb3.0 port.
+ To compile this driver as a module, choose M here
+
config USB_MV_OTG
tristate "Marvell USB OTG support"
depends on USB_EHCI_MV && USB_MV_UDC && PM
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 75f2bba..d6113a4 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o
obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o
obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o
obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o
+obj-$(CONFIG_USB_MT65XX_USB3_PHY) += phy-mt65xx-usb3.o
obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o
obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o
diff --git a/drivers/usb/phy/phy-mt65xx-usb3.c b/drivers/usb/phy/phy-mt65xx-usb3.c
new file mode 100644
index 0000000..ec5cf24
--- /dev/null
+++ b/drivers/usb/phy/phy-mt65xx-usb3.c
@@ -0,0 +1,724 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Chunfeng.Yun <chunfeng.yun@mediatek.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/resource.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_address.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/of.h>
+#include <linux/usb/phy.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+
+/*
+ * relative to MAC base address
+ */
+#define SSUSB_USB3_MAC_CSR_BASE (0x1400)
+#define SSUSB_USB3_SYS_CSR_BASE (0x1400)
+#define SSUSB_USB2_CSR_BASE (0x2400)
+
+/*
+ * for sifslv1 register
+ * relative to USB3_SIF_BASE base address
+ */
+#define SSUSB_SIFSLV_IPPC_BASE (0x700)
+
+/*
+ * for sifslv2 register
+ * relative to USB3_SIF_BASE base address
+ */
+#define SSUSB_SIFSLV_U2PHY_COM_BASE (0x10800)
+#define SSUSB_SIFSLV_U3PHYD_BASE (0x10900)
+#define SSUSB_SIFSLV_U2FREQ_BASE (0x10f00)
+#define SSUSB_USB30_PHYA_SIV_B_BASE (0x10b00)
+#define SSUSB_SIFSLV_U3PHYA_DA_BASE (0x10c00)
+#define SSUSB_SIFSLV_SPLLC (0x10000)
+
+/*port1 refs. +0x800(refer to port0)*/
+#define U3P_PORT_OFFSET (0x800) /*based on port0 */
+#define U3P_PHY_BASE(index) ((U3P_PORT_OFFSET) * (index))
+
+#define U3P_IP_PW_CTRL0 (SSUSB_SIFSLV_IPPC_BASE+0x0000)
+#define CTRL0_IP_SW_RST (0x1<<0)
+
+#define U3P_IP_PW_CTRL1 (SSUSB_SIFSLV_IPPC_BASE+0x0004)
+#define CTRL1_IP_HOST_PDN (0x1<<0)
+
+#define U3P_IP_PW_STS1 (SSUSB_SIFSLV_IPPC_BASE+0x0010)
+#define STS1_U3_MAC_RST (0x1 << 16)
+#define STS1_SYS125_RST (0x1 << 10)
+#define STS1_REF_RST (0x1 << 8)
+#define STS1_SYSPLL_STABLE (0x1 << 0)
+
+#define U3P_IP_PW_STS2 (SSUSB_SIFSLV_IPPC_BASE+0x0014)
+#define STS2_U2_MAC_RST (0x1 << 0)
+
+#define U3P_IP_XHCI_CAP (SSUSB_SIFSLV_IPPC_BASE + 0x24)
+#define CAP_U3_PORT_NUM(p) ((p) & 0xff)
+#define CAP_U2_PORT_NUM(p) (((p) >> 8) & 0xff)
+
+#define U3P_U3_CTRL_0P (SSUSB_SIFSLV_IPPC_BASE+0x0030)
+#define CTRL_U3_PORT_HOST_SEL (0x1<<2)
+#define CTRL_U3_PORT_PDN (0x1<<1)
+#define CTRL_U3_PORT_DIS (0x1<<0)
+
+#define U3P_U2_CTRL_0P (SSUSB_SIFSLV_IPPC_BASE+0x0050)
+#define CTRL_U2_PORT_HOST_SEL (0x1<<2)
+#define CTRL_U2_PORT_PDN (0x1<<1)
+#define CTRL_U2_PORT_DIS (0x1<<0)
+
+#define U3P_U3_CTRL(p) (U3P_U3_CTRL_0P + ((p) * 0x08))
+#define U3P_U2_CTRL(p) (U3P_U2_CTRL_0P + ((p) * 0x08))
+
+#define U3P_USBPHYACR5 (SSUSB_SIFSLV_U2PHY_COM_BASE+0x0014)
+#define PA5_RG_U2_HSTX_SRCTRL (0x7<<12)
+#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12)
+#define PA5_RG_U2_HS_100U_U3_EN (0x1<<11)
+
+#define U3P_USBPHYACR6 (SSUSB_SIFSLV_U2PHY_COM_BASE+0x0018)
+#define PA6_RG_U2_ISO_EN (0x1<<31)
+#define PA6_RG_U2_BC11_SW_EN (0x1<<23)
+#define PA6_RG_U2_OTG_VBUSCMP_EN (0x1<<20)
+
+#define U3P_U2PHYACR4 (SSUSB_SIFSLV_U2PHY_COM_BASE+0x0020)
+#define P2C_RG_USB20_GPIO_CTL (0x1<<9)
+#define P2C_USB20_GPIO_MODE (0x1<<8)
+#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
+
+#define U3P_U2PHYDTM0 (SSUSB_SIFSLV_U2PHY_COM_BASE+0x0068)
+#define P2C_FORCE_UART_EN (0x1<<26)
+#define P2C_FORCE_DATAIN (0x1<<23)
+#define P2C_FORCE_DM_PULLDOWN (0x1<<21)
+#define P2C_FORCE_DP_PULLDOWN (0x1<<20)
+#define P2C_FORCE_XCVRSEL (0x1<<19)
+#define P2C_FORCE_SUSPENDM (0x1<<18)
+#define P2C_FORCE_TERMSEL (0x1<<17)
+#define P2C_RG_DATAIN (0xf<<10)
+#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10)
+#define P2C_RG_DMPULLDOWN (0x1<<7)
+#define P2C_RG_DPPULLDOWN (0x1<<6)
+#define P2C_RG_XCVRSEL (0x3<<4)
+#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4)
+#define P2C_RG_SUSPENDM (0x1<<3)
+#define P2C_RG_TERMSEL (0x1<<2)
+#define P2C_DTM0_PART_MASK \
+ (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
+ P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
+ P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
+ P2C_RG_TERMSEL)
+
+#define U3P_U2PHYDTM1 (SSUSB_SIFSLV_U2PHY_COM_BASE+0x006C)
+#define P2C_RG_UART_EN (0x1<<16)
+#define P2C_RG_VBUSVALID (0x1<<5)
+#define P2C_RG_SESSEND (0x1<<4)
+#define P2C_RG_AVALID (0x1<<2)
+
+#define U3P_U3_PHYA_REG0 (SSUSB_USB30_PHYA_SIV_B_BASE+0x0000)
+#define P3A_RG_U3_VUSB10_ON (1<<5)
+
+#define U3P_U3_PHYA_REG6 (SSUSB_USB30_PHYA_SIV_B_BASE+0x0018)
+#define P3A_RG_TX_EIDLE_CM (0xf<<28)
+#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28)
+
+#define U3P_U3_PHYA_REG9 (SSUSB_USB30_PHYA_SIV_B_BASE+0x0024)
+#define P3A_RG_RX_DAC_MUX (0x1f<<1)
+#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1)
+
+#define U3P_U3PHYA_DA_REG0 (SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0)
+#define P3A_RG_XTAL_EXT_EN_U3 (0x3<<10)
+#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10)
+
+#define U3P_PHYD_CDR1 (SSUSB_SIFSLV_U3PHYD_BASE+0x5c)
+#define P3D_RG_CDR_BIR_LTD1 (0x1f<<24)
+#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24)
+#define P3D_RG_CDR_BIR_LTD0 (0x1f<<8)
+#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8)
+
+#define U3P_XTALCTL3 (SSUSB_SIFSLV_SPLLC + 0x18)
+#define XC3_RG_U3_XTAL_RX_PWD (0x1<<9)
+#define XC3_RG_U3_FRC_XTAL_RX_PWD (0x1<<8)
+
+#define U3P_UX_EXIT_LFPS_PARAM (SSUSB_USB3_MAC_CSR_BASE+0x00A0)
+#define RX_UX_EXIT_REF (0xff<<8)
+#define RX_UX_EXIT_REF_VAL (0x3 << 8)
+
+#define U3P_REF_CLK_PARAM (SSUSB_USB3_MAC_CSR_BASE+0x00B0)
+#define REF_CLK_1000NS (0xff << 0)
+#define REF_CLK_VAL_DEF (0xa << 0)
+
+#define U3P_LINK_PM_TIMER (SSUSB_USB3_SYS_CSR_BASE+0x0208)
+#define PM_LC_TIMEOUT (0xf<<0)
+#define PM_LC_TIMEOUT_VAL (0x3 << 0)
+
+#define U3P_TIMING_PULSE_CTRL (SSUSB_USB3_SYS_CSR_BASE+0x02B4)
+#define U3T_CNT_1US (0xff << 0)
+#define U3T_CNT_1US_VAL (0x3f << 0) /* 62.5MHz: 63 */
+
+#define U3P_U2_TIMING_PARAM (SSUSB_USB2_CSR_BASE+0x0040)
+#define U2T_VAL_1US (0xff<<0)
+#define U2T_VAL_1US_VAL (0x3f << 0) /* 62.5MHz: 63 */
+
+
+struct mt65xx_u3phy {
+ struct usb_phy phy;
+ struct device *dev;
+ struct regulator *vusb33;
+ struct regulator *p1_vbus;
+ void __iomem *mac_base; /* only device-mac regs, exclude xhci's */
+ void __iomem *sif_base; /* include sif & sif2 */
+ struct clk *wk_deb_p0; /* port0's wakeup debounce clock */
+ struct clk *wk_deb_p1;
+ struct clk *sys_mac; /* sys and mac clock */
+ struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
+ bool enable_usb2_p1;
+};
+
+
+static void u3p_writel(void __iomem *base, u32 offset, u32 data)
+{
+ writel(data, base + offset);
+}
+
+static u32 u3p_readl(void __iomem *base, u32 offset)
+{
+ return readl(base + offset);
+}
+
+static void u3p_setmsk(void __iomem *base, u32 offset, u32 msk)
+{
+ void __iomem *addr = base + offset;
+
+ writel((readl(addr) | msk), addr);
+}
+
+static void u3p_clrmsk(void __iomem *base, u32 offset, u32 msk)
+{
+ void __iomem *addr = base + offset;
+
+ writel((readl(addr) & ~msk), addr);
+}
+
+static void u3p_setval(void __iomem *base, u32 offset,
+ u32 mask, u32 value)
+{
+ void __iomem *addr = base + offset;
+ unsigned int new_value;
+
+ new_value = (readl(addr) & ~mask) | value;
+ writel(new_value, addr);
+}
+
+static void phy_index_power_on(struct mt65xx_u3phy *u3phy, int index)
+{
+ void __iomem *sif_base = u3phy->sif_base + U3P_PHY_BASE(index);
+
+ if (!index) {
+ /* Set RG_SSUSB_VUSB10_ON as 1 after VUSB10 ready */
+ u3p_setmsk(sif_base, U3P_U3_PHYA_REG0, P3A_RG_U3_VUSB10_ON);
+ /* power domain iso disable */
+ u3p_clrmsk(sif_base, U3P_USBPHYACR6, PA6_RG_U2_ISO_EN);
+ }
+
+ /* switch to USB function. (system register, force ip into usb mode) */
+ u3p_clrmsk(sif_base, U3P_U2PHYDTM0, P2C_FORCE_UART_EN);
+ u3p_clrmsk(sif_base, U3P_U2PHYDTM1, P2C_RG_UART_EN);
+ if (!index)
+ u3p_clrmsk(sif_base, U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK);
+
+ /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
+ u3p_clrmsk(sif_base, U3P_U2PHYDTM0, P2C_FORCE_SUSPENDM);
+ u3p_clrmsk(sif_base, U3P_U2PHYDTM0,
+ P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
+
+ /* DP/DM BC1.1 path Disable */
+ u3p_clrmsk(sif_base, U3P_USBPHYACR6, PA6_RG_U2_BC11_SW_EN);
+ /* OTG Enable */
+ u3p_setmsk(sif_base, U3P_USBPHYACR6, PA6_RG_U2_OTG_VBUSCMP_EN);
+ u3p_setval(sif_base, U3P_U3PHYA_DA_REG0, P3A_RG_XTAL_EXT_EN_U3,
+ P3A_RG_XTAL_EXT_EN_U3_VAL(2));
+ u3p_setval(sif_base, U3P_U3_PHYA_REG9, P3A_RG_RX_DAC_MUX,
+ P3A_RG_RX_DAC_MUX_VAL(4));
+
+ if (!index) {
+ u3p_setmsk(sif_base, U3P_XTALCTL3, XC3_RG_U3_XTAL_RX_PWD);
+ u3p_setmsk(sif_base, U3P_XTALCTL3, XC3_RG_U3_FRC_XTAL_RX_PWD);
+ /* [mt8173]disable Change 100uA current from SSUSB */
+ u3p_clrmsk(sif_base, U3P_USBPHYACR5, PA5_RG_U2_HS_100U_U3_EN);
+ }
+ u3p_setval(sif_base, U3P_U3_PHYA_REG6, P3A_RG_TX_EIDLE_CM,
+ P3A_RG_TX_EIDLE_CM_VAL(0xe));
+ u3p_setval(sif_base, U3P_PHYD_CDR1, P3D_RG_CDR_BIR_LTD0,
+ P3D_RG_CDR_BIR_LTD0_VAL(0xc));
+ u3p_setval(sif_base, U3P_PHYD_CDR1, P3D_RG_CDR_BIR_LTD1,
+ P3D_RG_CDR_BIR_LTD1_VAL(0x3));
+
+ udelay(800);
+ u3p_setmsk(sif_base, U3P_U2PHYDTM1, P2C_RG_VBUSVALID | P2C_RG_AVALID);
+ u3p_clrmsk(sif_base, U3P_U2PHYDTM1, P2C_RG_SESSEND);
+
+ /* USB 2.0 slew rate calibration */
+ u3p_setval(sif_base, U3P_USBPHYACR5, PA5_RG_U2_HSTX_SRCTRL,
+ PA5_RG_U2_HSTX_SRCTRL_VAL(4));
+
+ dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
+}
+
+
+static void phy_index_power_off(struct mt65xx_u3phy *u3phy, int index)
+{
+ void __iomem *sif_base = u3phy->sif_base + U3P_PHY_BASE(index);
+
+ /* switch to USB function. (system register, force ip into usb mode) */
+ u3p_clrmsk(sif_base, U3P_U2PHYDTM0, P2C_FORCE_UART_EN);
+ u3p_clrmsk(sif_base, U3P_U2PHYDTM1, P2C_RG_UART_EN);
+ if (!index)
+ u3p_clrmsk(sif_base, U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK);
+
+ u3p_setmsk(sif_base, U3P_U2PHYDTM0, P2C_FORCE_SUSPENDM);
+ u3p_setval(sif_base, U3P_U2PHYDTM0,
+ P2C_RG_XCVRSEL, P2C_RG_XCVRSEL_VAL(1));
+ u3p_setval(sif_base, U3P_U2PHYDTM0,
+ P2C_RG_DATAIN, P2C_RG_DATAIN_VAL(0));
+ u3p_setmsk(sif_base, U3P_U2PHYDTM0, P2C_DTM0_PART_MASK);
+ /* DP/DM BC1.1 path Disable */
+ u3p_clrmsk(sif_base, U3P_USBPHYACR6, PA6_RG_U2_BC11_SW_EN);
+ /* OTG Disable */
+ u3p_clrmsk(sif_base, U3P_USBPHYACR6, PA6_RG_U2_OTG_VBUSCMP_EN);
+ if (!index) {
+ /* Change 100uA current switch to USB2.0 */
+ u3p_clrmsk(sif_base, U3P_USBPHYACR5, PA5_RG_U2_HS_100U_U3_EN);
+ }
+ udelay(800);
+
+ /* let suspendm=0, set utmi into analog power down */
+ u3p_clrmsk(sif_base, U3P_U2PHYDTM0, P2C_RG_SUSPENDM);
+ udelay(1);
+
+ u3p_clrmsk(sif_base, U3P_U2PHYDTM1, P2C_RG_VBUSVALID | P2C_RG_AVALID);
+ u3p_setmsk(sif_base, U3P_U2PHYDTM1, P2C_RG_SESSEND);
+ if (!index) {
+ /* Set RG_SSUSB_VUSB10_ON as 1 after VUSB10 ready */
+ u3p_clrmsk(sif_base, U3P_U3_PHYA_REG0, P3A_RG_U3_VUSB10_ON);
+ }
+ dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
+}
+
+
+static int check_ip_clk_status(struct mt65xx_u3phy *u3phy)
+{
+ int ret;
+ int u3_port_num;
+ int u2_port_num;
+ u32 xhci_cap;
+ u32 val;
+ void __iomem *sif_base = u3phy->sif_base;
+
+ xhci_cap = u3p_readl(sif_base, U3P_IP_XHCI_CAP);
+ u3_port_num = CAP_U3_PORT_NUM(xhci_cap);
+ u2_port_num = CAP_U2_PORT_NUM(xhci_cap);
+
+ ret = readl_poll_timeout(sif_base + U3P_IP_PW_STS1, val,
+ (val & STS1_SYSPLL_STABLE), 100, 10000);
+ if (ret) {
+ dev_err(u3phy->dev, "sypll is not stable!!!\n");
+ return ret;
+ }
+
+ ret = readl_poll_timeout(sif_base + U3P_IP_PW_STS1, val,
+ (val & STS1_REF_RST), 100, 10000);
+ if (ret) {
+ dev_err(u3phy->dev, "ref_clk is still active!!!\n");
+ return ret;
+ }
+
+ ret = readl_poll_timeout(sif_base + U3P_IP_PW_STS1, val,
+ (val & STS1_SYS125_RST), 100, 10000);
+ if (ret) {
+ dev_err(u3phy->dev, "sys125_ck is still active!!!\n");
+ return ret;
+ }
+
+ if (u3_port_num) {
+ ret = readl_poll_timeout(sif_base + U3P_IP_PW_STS1, val,
+ (val & STS1_U3_MAC_RST), 100, 10000);
+ if (ret) {
+ dev_err(u3phy->dev, "mac3_mac_ck is still active!!!\n");
+ return ret;
+ }
+ }
+
+ if (u2_port_num) {
+ ret = readl_poll_timeout(sif_base + U3P_IP_PW_STS2, val,
+ (val & STS2_U2_MAC_RST), 100, 10000);
+ if (ret) {
+ dev_err(u3phy->dev, "mac2_sys_ck is still active!!!\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int u3phy_ports_enable(struct mt65xx_u3phy *u3phy)
+{
+ int i;
+ u32 temp;
+ int u3_port_num;
+ int u2_port_num;
+ void __iomem *sif_base = u3phy->sif_base;
+
+ temp = u3p_readl(sif_base, U3P_IP_XHCI_CAP);
+ u3_port_num = CAP_U3_PORT_NUM(temp);
+ u2_port_num = CAP_U2_PORT_NUM(temp);
+ dev_dbg(u3phy->dev, "%s u2p:%d, u3p:%d\n",
+ __func__, u2_port_num, u3_port_num);
+
+ /* power on host ip */
+ u3p_clrmsk(sif_base, U3P_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
+
+ /* power on and enable all u3 ports */
+ for (i = 0; i < u3_port_num; i++) {
+ temp = u3p_readl(sif_base, U3P_U3_CTRL(i));
+ temp &= ~(CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS);
+ temp |= CTRL_U3_PORT_HOST_SEL;
+ u3p_writel(sif_base, U3P_U3_CTRL(i), temp);
+ }
+
+ /* power on and enable all u2 ports */
+ for (i = 0; i < u2_port_num; i++) {
+ temp = u3p_readl(sif_base, U3P_U2_CTRL(i));
+ temp &= ~(CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS);
+ temp |= CTRL_U2_PORT_HOST_SEL;
+ u3p_writel(sif_base, U3P_U2_CTRL(i), temp);
+ }
+ return check_ip_clk_status(u3phy);
+}
+
+
+static void u3phy_timing_init(struct mt65xx_u3phy *u3phy)
+{
+ void __iomem *mbase = u3phy->mac_base;
+ int u3_port_num;
+ u32 temp;
+
+ temp = u3p_readl(u3phy->sif_base, U3P_IP_XHCI_CAP);
+ u3_port_num = CAP_U3_PORT_NUM(temp);
+
+ if (u3_port_num) {
+ /* set MAC reference clock speed */
+ u3p_setval(mbase, U3P_UX_EXIT_LFPS_PARAM,
+ RX_UX_EXIT_REF, RX_UX_EXIT_REF_VAL);
+ /* set REF_CLK */
+ u3p_setval(mbase, U3P_REF_CLK_PARAM,
+ REF_CLK_1000NS, REF_CLK_VAL_DEF);
+ /* set SYS_CLK */
+ u3p_setval(mbase, U3P_TIMING_PULSE_CTRL,
+ U3T_CNT_1US, U3T_CNT_1US_VAL);
+ /* set LINK_PM_TIMER=3 */
+ u3p_setval(mbase, U3P_LINK_PM_TIMER,
+ PM_LC_TIMEOUT, PM_LC_TIMEOUT_VAL);
+ }
+ u3p_setval(mbase, U3P_U2_TIMING_PARAM, U2T_VAL_1US, U2T_VAL_1US_VAL);
+}
+
+
+static int u3phy_clks_enable(struct mt65xx_u3phy *u3phy)
+{
+ int ret;
+
+ ret = clk_prepare_enable(u3phy->sys_mac);
+ if (ret) {
+ dev_err(u3phy->dev, "failed to enable sys_mac\n");
+ goto sys_mac_err;
+ }
+
+ ret = clk_prepare_enable(u3phy->u3phya_ref);
+ if (ret) {
+ dev_err(u3phy->dev, "failed to enable u3phya_ref\n");
+ goto u3phya_ref_err;
+ }
+ ret = clk_prepare_enable(u3phy->wk_deb_p0);
+ if (ret) {
+ dev_err(u3phy->dev, "failed to enable wk_deb_p0\n");
+ goto usb_p0_err;
+ }
+ if (u3phy->enable_usb2_p1) {
+ ret = clk_prepare_enable(u3phy->wk_deb_p1);
+ if (ret) {
+ dev_err(u3phy->dev, "failed to enable wk_deb_p1\n");
+ goto usb_p1_err;
+ }
+ }
+ udelay(50);
+
+ return 0;
+
+usb_p1_err:
+ clk_disable_unprepare(u3phy->wk_deb_p0);
+usb_p0_err:
+ clk_disable_unprepare(u3phy->u3phya_ref);
+u3phya_ref_err:
+ clk_disable_unprepare(u3phy->sys_mac);
+sys_mac_err:
+ return -EINVAL;
+}
+
+static void u3phy_clks_disable(struct mt65xx_u3phy *u3phy)
+{
+ if (u3phy->enable_usb2_p1)
+ clk_disable_unprepare(u3phy->wk_deb_p1);
+ clk_disable_unprepare(u3phy->wk_deb_p0);
+ clk_disable_unprepare(u3phy->u3phya_ref);
+ clk_disable_unprepare(u3phy->sys_mac);
+}
+
+
+static int mt65xx_u3phy_init(struct usb_phy *phy)
+{
+ struct mt65xx_u3phy *u3phy;
+ int ret;
+
+ u3phy = container_of(phy, struct mt65xx_u3phy, phy);
+ dev_dbg(u3phy->dev, "%s+\n", __func__);
+
+ if (u3phy->enable_usb2_p1) {
+ ret = regulator_enable(u3phy->p1_vbus);
+ if (ret) {
+ dev_err(u3phy->dev, "failed to enable p1-vbus\n");
+ goto reg_p1_err;
+ }
+ }
+
+ ret = regulator_enable(u3phy->vusb33);
+ if (ret) {
+ dev_err(u3phy->dev, "failed to enable vusb33\n");
+ goto reg_err;
+ }
+
+ ret = pm_runtime_get_sync(u3phy->dev);
+ if (ret < 0)
+ goto pm_err;
+
+ ret = u3phy_clks_enable(u3phy);
+ if (ret) {
+ dev_err(u3phy->dev, "failed to enable clks\n");
+ goto clks_err;
+ }
+
+ /* reset whole ip */
+ u3p_setmsk(u3phy->sif_base, U3P_IP_PW_CTRL0, CTRL0_IP_SW_RST);
+ u3p_clrmsk(u3phy->sif_base, U3P_IP_PW_CTRL0, CTRL0_IP_SW_RST);
+
+ ret = u3phy_ports_enable(u3phy);
+ if (ret) {
+ dev_err(u3phy->dev, "failed to enable ports\n");
+ goto port_err;
+ }
+ u3phy_timing_init(u3phy);
+ phy_index_power_on(u3phy, 0);
+ if (u3phy->enable_usb2_p1)
+ phy_index_power_on(u3phy, 1);
+
+ return 0;
+
+port_err:
+ u3phy_clks_disable(u3phy);
+clks_err:
+ pm_runtime_put_sync(u3phy->dev);
+pm_err:
+ regulator_disable(u3phy->vusb33);
+reg_err:
+ if (u3phy->enable_usb2_p1)
+ regulator_disable(u3phy->p1_vbus);
+reg_p1_err:
+ return ret;
+}
+
+
+static void mt65xx_u3phy_shutdown(struct usb_phy *phy)
+{
+ struct mt65xx_u3phy *u3phy;
+
+ u3phy = container_of(phy, struct mt65xx_u3phy, phy);
+ dev_dbg(u3phy->dev, "%s+\n", __func__);
+
+ phy_index_power_off(u3phy, 0);
+ if (u3phy->enable_usb2_p1) {
+ phy_index_power_off(u3phy, 1);
+ regulator_disable(u3phy->p1_vbus);
+ }
+ u3phy_clks_disable(u3phy);
+ pm_runtime_put_sync(u3phy->dev);
+ regulator_disable(u3phy->vusb33);
+}
+
+
+static int mt65xx_u3phy_suspend(struct usb_phy *x, int suspend)
+{
+ struct mt65xx_u3phy *u3phy = container_of(x, struct mt65xx_u3phy, phy);
+
+ if (suspend) {
+ mt65xx_u3phy_shutdown(&u3phy->phy);
+ return 0;
+ } else {
+ return mt65xx_u3phy_init(&u3phy->phy);
+ }
+}
+
+
+static const struct of_device_id mt65xx_u3phy_id_table[] = {
+ { .compatible = "mediatek,mt8173-u3phy",},
+ { },
+};
+MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
+
+
+static int mt65xx_u3phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct resource *mac_res;
+ struct resource *sif_res;
+ struct mt65xx_u3phy *u3phy;
+ int retval = -ENOMEM;
+
+ u3phy = devm_kzalloc(&pdev->dev, sizeof(*u3phy), GFP_KERNEL);
+ if (!u3phy)
+ goto err;
+
+ u3phy->dev = &pdev->dev;
+
+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ u3phy->mac_base = devm_ioremap_resource(dev, mac_res);
+ if (IS_ERR(u3phy->mac_base)) {
+ dev_err(dev, "failed to remap mac regs\n");
+ retval = PTR_ERR(u3phy->mac_base);
+ goto err;
+ }
+
+ sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ u3phy->sif_base = devm_ioremap_resource(dev, sif_res);
+ if (IS_ERR(u3phy->sif_base)) {
+ dev_err(dev, "failed to remap sif regs\n");
+ retval = PTR_ERR(u3phy->sif_base);
+ goto err;
+ }
+
+ u3phy->enable_usb2_p1 = !of_property_read_bool(np, "disable-usb2-p1");
+ dev_dbg(dev, "enable_usb2_p1 - %d\n", u3phy->enable_usb2_p1);
+
+ u3phy->sys_mac = devm_clk_get(u3phy->dev, "sys_mac");
+ if (IS_ERR(u3phy->sys_mac)) {
+ dev_err(dev, "error to get sys_mac\n");
+ retval = PTR_ERR(u3phy->sys_mac);
+ goto err;
+ }
+
+ u3phy->u3phya_ref = devm_clk_get(u3phy->dev, "u3phya_ref");
+ if (IS_ERR(u3phy->u3phya_ref)) {
+ dev_err(dev, "error to get u3phya_ref\n");
+ retval = PTR_ERR(u3phy->u3phya_ref);
+ goto err;
+ }
+
+ u3phy->wk_deb_p0 = devm_clk_get(u3phy->dev, "wakeup_deb_p0");
+ if (IS_ERR(u3phy->wk_deb_p0)) {
+ dev_err(dev, "error to get wakeup_deb_p0\n");
+ retval = PTR_ERR(u3phy->wk_deb_p0);
+ goto err;
+ }
+
+ if (u3phy->enable_usb2_p1) {
+ u3phy->wk_deb_p1 = devm_clk_get(u3phy->dev, "wakeup_deb_p1");
+ if (IS_ERR(u3phy->wk_deb_p1)) {
+ dev_err(dev, "error to get wakeup_deb_p1\n");
+ retval = PTR_ERR(u3phy->wk_deb_p1);
+ goto err;
+ }
+
+ u3phy->p1_vbus = devm_regulator_get(u3phy->dev, "reg-p1-vbus");
+ if (IS_ERR_OR_NULL(u3phy->p1_vbus)) {
+ dev_err(dev, "fail to get p1-vbus\n");
+ retval = PTR_ERR(u3phy->p1_vbus);
+ goto err;
+ }
+ }
+
+ u3phy->vusb33 = devm_regulator_get(u3phy->dev, "reg-vusb33");
+ if (IS_ERR_OR_NULL(u3phy->vusb33)) {
+ dev_err(dev, "fail to get vusb33\n");
+ retval = PTR_ERR(u3phy->vusb33);
+ goto err;
+ }
+
+ pm_runtime_enable(dev);
+ u3phy->phy.dev = u3phy->dev;
+ u3phy->phy.label = "mt65xx-usb3phy";
+ u3phy->phy.type = USB_PHY_TYPE_USB3;
+ u3phy->phy.init = mt65xx_u3phy_init;
+ u3phy->phy.shutdown = mt65xx_u3phy_shutdown;
+ u3phy->phy.set_suspend = mt65xx_u3phy_suspend;
+
+ platform_set_drvdata(pdev, u3phy);
+ retval = usb_add_phy_dev(&u3phy->phy);
+ if (retval) {
+ dev_err(dev, "failed to add phy\n");
+ goto add_phy_err;
+ }
+
+ return 0;
+
+add_phy_err:
+ pm_runtime_disable(dev);
+err:
+ return retval;
+}
+
+static int mt65xx_u3phy_remove(struct platform_device *pdev)
+{
+ struct mt65xx_u3phy *u3phy = platform_get_drvdata(pdev);
+
+ mt65xx_u3phy_shutdown(&u3phy->phy);
+ pm_runtime_disable(&pdev->dev);
+ usb_remove_phy(&u3phy->phy);
+
+ return 0;
+}
+
+static struct platform_driver mt65xx_u3phy_driver = {
+ .probe = mt65xx_u3phy_probe,
+ .remove = mt65xx_u3phy_remove,
+ .driver = {
+ .name = "mt65xx-u3phy",
+ .of_match_table = mt65xx_u3phy_id_table,
+ },
+};
+
+module_platform_driver(mt65xx_u3phy_driver);
+
+MODULE_DESCRIPTION("Mt65xx USB PHY driver");
+MODULE_LICENSE("GPL v2");
--
1.7.10.4