openwrtv3/target/linux/lantiq/patches-2.6.39/999-fix-ase-etop.patch
John Crispin 500d7d4bc8 fix etehrnet when using EPHY on lantiq ASE
SVN-Revision: 27696
2011-07-19 18:06:52 +00:00

98 lines
2.8 KiB
Diff

--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
@@ -40,6 +40,15 @@
#define MIPS_CPU_TIMER_IRQ 7
+#ifdef CONFIG_SOC_AMAZON_SE
+#define LTQ_DMA_CH0_INT (INT_NUM_IM3_IRL0)
+#define LTQ_DMA_CH1_INT (INT_NUM_IM3_IRL0 + 1)
+#define LTQ_DMA_CH2_INT (INT_NUM_IM3_IRL0 + 2)
+#define LTQ_DMA_CH3_INT (INT_NUM_IM3_IRL0 + 3)
+#define LTQ_DMA_CH4_INT (INT_NUM_IM3_IRL0 + 4)
+#define LTQ_DMA_CH5_INT (INT_NUM_IM3_IRL0 + 5)
+#define LTQ_DMA_CH6_INT (INT_NUM_IM3_IRL0 + 6)
+#else
#define LTQ_DMA_CH0_INT (INT_NUM_IM2_IRL0)
#define LTQ_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
#define LTQ_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
@@ -47,6 +56,7 @@
#define LTQ_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
#define LTQ_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
#define LTQ_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
+#endif
#define LTQ_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
#define LTQ_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
#define LTQ_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -128,6 +128,11 @@
extern void ltq_pmu_enable(unsigned int module);
extern void ltq_pmu_disable(unsigned int module);
+static inline int ltq_is_ase(void)
+{
+ return (ltq_get_soc_type() == SOC_TYPE_AMAZON_SE);
+}
+
static inline int ltq_is_ar9(void)
{
return (ltq_get_soc_type() == SOC_TYPE_AR9);
--- a/arch/mips/lantiq/xway/mach-easy50601.c
+++ b/arch/mips/lantiq/xway/mach-easy50601.c
@@ -41,9 +41,14 @@
.parts = easy50601_partitions,
};
+static struct ltq_eth_data ltq_eth_data = {
+ .mii_mode = -1, /* use EPHY */
+};
+
static void __init easy50601_init(void)
{
ltq_register_nor(&easy50601_flash_data);
+ ltq_register_etop(&ltq_eth_data);
}
MIPS_MACHINE(LTQ_MACH_EASY50601,
--- a/drivers/net/lantiq_etop.c
+++ b/drivers/net/lantiq_etop.c
@@ -72,7 +72,11 @@
/* use 2 static channels for TX/RX */
#define LTQ_ETOP_TX_CHANNEL 1
+#ifdef CONFIG_SOC_AMAZON_SE
+#define LTQ_ETOP_RX_CHANNEL 5
+#else
#define LTQ_ETOP_RX_CHANNEL 6
+#endif
#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
@@ -255,6 +259,9 @@
}
static int
+ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data);
+
+static int
ltq_etop_hw_init(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -274,6 +281,16 @@
break;
default:
+ if (ltq_is_ase()) {
+#define PMU_EPHY 0x80
+#define LTQ_CGU_IFCCR 0x0018
+ ltq_pmu_enable(PMU_EPHY);
+ ltq_etop_w32_mask(0, 1, LTQ_ETOP_CFG);
+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | (0x1 << 4), LTQ_CGU_IFCCR);
+ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
+ printk("Selected EPHY mode \n");
+ break;
+ }
netdev_err(dev, "unknown mii mode %d\n",
priv->pldata->mii_mode);
return -ENOTSUPP;