openwrtv3/package/mac80211/patches/620-rt2x00_soc_led_support.patch
Felix Fietkau 34643f24ed mac80211: update to wireless-testing 2011-04-06
adds some more pending patches which (among other things) fix the 'failed to stop RX DMA' messages

SVN-Revision: 26506
2011-04-07 18:42:22 +00:00

75 lines
2.6 KiB
Diff

--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -938,6 +938,7 @@ EXPORT_SYMBOL_GPL(rt2800_rfkill_poll);
static void rt2800_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
+ u32 reg;
struct rt2x00_led *led =
container_of(led_cdev, struct rt2x00_led, led_dev);
unsigned int enabled = brightness != LED_OFF;
@@ -950,24 +951,46 @@ static void rt2800_brightness_set(struct
rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
EEPROM_FREQ_LED_MODE);
- if (led->type == LED_TYPE_RADIO) {
- rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
- enabled ? 0x20 : 0);
- } else if (led->type == LED_TYPE_ASSOC) {
- rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
- enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
- } else if (led->type == LED_TYPE_QUALITY) {
- /*
- * The brightness is divided into 6 levels (0 - 5),
- * The specs tell us the following levels:
- * 0, 1 ,3, 7, 15, 31
- * to determine the level in a simple way we can simply
- * work with bitshifting:
- * (1 << level) - 1
- */
- rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
- (1 << brightness / (LED_FULL / 6)) - 1,
- polarity);
+ /* Check for SoC (SOC devices don't support MCU requests) */
+ if (rt2x00_is_soc(led->rt2x00dev)) {
+ rt2800_register_read(led->rt2x00dev, LED_CFG, &reg);
+
+ /* Set LED Polarity */
+ rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, polarity);
+
+ /* Set LED Mode */
+ if (led->type == LED_TYPE_RADIO) {
+ rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE,
+ enabled ? 3 : 0);
+ } else if (led->type == LED_TYPE_ASSOC) {
+ rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE,
+ enabled ? 3 : 0);
+ } else if (led->type == LED_TYPE_QUALITY) {
+ rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE,
+ enabled ? 3 : 0);
+ }
+ rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
+ }
+ else {
+ if (led->type == LED_TYPE_RADIO) {
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+ enabled ? 0x20 : 0);
+ } else if (led->type == LED_TYPE_ASSOC) {
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+ enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
+ } else if (led->type == LED_TYPE_QUALITY) {
+ /*
+ * The brightness is divided into 6 levels (0 - 5),
+ * The specs tell us the following levels:
+ * 0, 1 ,3, 7, 15, 31
+ * to determine the level in a simple way we can simply
+ * work with bitshifting:
+ * (1 << level) - 1
+ */
+ rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+ (1 << brightness / (LED_FULL / 6)) - 1,
+ polarity);
+ }
}
}