openwrtv3/package/boot
David Bauer e36f8b3f39 ar71xx: add support for OCEDO Koala
This commit adds support for the OCEDO Koala

SOC:	Qualcomm QCA9558 (Scorpion)
RAM:    128MB
FLASH:  16MiB
WLAN1:  QCA9558 2.4 GHz 802.11bgn 3x3
WLAN2:  QCA9880 5 GHz 802.11nac 3x3
INPUT:  RESET button
LED:    Power, LAN, WiFi 2.4, WiFi 5, SYS
Serial: Header Next to Black metal shield
        Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
        The Serial setting is 115200-8-N-1.

Tested and working:
 - Ethernet
 - 2.4 GHz WiFi
 - 5 GHz WiFi
 - TFTP boot from ramdisk image
 - Installation via ramdisk image
 - OpenWRT sysupgrade
 - Buttons
 - LEDs

Installation seems to be possible only through booting an OpenWRT
ramdisk image.

Hold down the reset button while powering on the device. It will load a
ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8.

Note: depending on the present software, the device might also try to
pull a file called 'koala-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.

Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.

Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with

 > fw_setenv bootcmd run bootcmd_1

Afterwards you can reboot the device.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-06-07 09:31:58 +02:00
..
apex ixp4xx: put apex images into image staging directory 2017-01-27 16:53:31 +01:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: use release build and bump version 2018-02-05 12:58:27 +01:00
at91bootstrap at91: Add SAMA5D2 PTC EK board 2018-05-05 06:55:22 +02:00
fconfig treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
grub2 grub2: disable building platform code for target utility 2018-02-22 09:30:22 +01:00
imx-bootlets treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
kexec-tools kexec-tools: bump version to 2.0.16 2018-02-11 16:10:51 +01:00
kobs-ng kobs-ng: add header for integer definitions 2017-11-16 22:56:54 +01:00
rbcfg rbcfg: Implement CPU frequency control 2017-10-07 15:00:26 +02:00
uboot-ar71xx uboot-ar71xx: fix build error 2017-04-06 16:25:08 +02:00
uboot-at91 at91: Add SAMA5D2 PTC EK board 2018-05-05 06:55:22 +02:00
uboot-envtools ar71xx: add support for OCEDO Koala 2018-06-07 09:31:58 +02:00
uboot-fritz4040 ipq40xx: add target 2018-03-14 19:04:50 +01:00
uboot-imx6 uboot-imx6: fix build with GCC 7 2018-03-13 22:28:59 +01:00
uboot-kirkwood uboot-kirkwood: update to 2018.03 2018-03-20 21:45:27 +01:00
uboot-lantiq lantiq: rename gphy firmware 2018-02-20 19:25:17 +01:00
uboot-layerscape layerscape: support ubifs rootfs in u-boot env 2018-02-13 10:01:51 +01:00
uboot-layerscape-armv8_32b layerscape: support ubifs rootfs in u-boot env 2018-02-13 10:01:51 +01:00
uboot-mvebu uboot-mvebu: fix build on hosts lacking pkg-config 2018-05-23 09:05:55 +02:00
uboot-mxs uboot-mxs: fix build on hosts lacking pkg-config 2018-05-23 09:15:52 +02:00
uboot-omap packages/uboot-omap: bugfix: serial using ns16550 fifo not enabled 2018-04-11 03:43:38 +02:00
uboot-oxnas oxnas: bring in new oxnas target 2018-06-01 15:45:06 +02:00
uboot-sunxi sunxi: add build for sopine 2018-03-23 23:53:20 +01:00
uboot-xburst treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
uboot-zynq uboot-zynq: update to 2017.03 2018-06-07 09:00:49 +02:00
yamonenv packages: mark packages depending on a target as nonshared 2017-01-24 09:45:05 +01:00