3c1f6e358d
Patches are generated using the "format-patch" command from the following location: *https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base *rev=0771849495b4128cac2faf7d49c85c729fc48b20 Patches numbered 76/77/102/103 have already been integrated in 3.14.12, so they're not in this list. All these patches are either integrated are pending integration into kernel.org, therefore these patches should go away once the kernel gets upgraded to 3.16. Support is currently limited to AP148 board but can be extended to other platforms in the future. These changes do not cover ethernet connectivity. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 42334
191 lines
4.9 KiB
Diff
191 lines
4.9 KiB
Diff
From 355bf7c6410f5b6e37b5c2b28ebe59bb701c42d6 Mon Sep 17 00:00:00 2001
|
|
From: Kumar Gala <galak@codeaurora.org>
|
|
Date: Wed, 28 May 2014 12:12:40 -0500
|
|
Subject: [PATCH 093/182] ARM: dts: qcom: Update msm8660 device trees
|
|
|
|
* Move SoC peripherals into an SoC container node
|
|
* Move serial enabling into board file (qcom-msm8660-surf.dts)
|
|
* Cleanup cpu node to match binding spec, enable-method and compatible
|
|
should be per cpu, not part of the container
|
|
* Add GSBI node and configuration of GSBI controller
|
|
|
|
Signed-off-by: Kumar Gala <galak@codeaurora.org>
|
|
---
|
|
arch/arm/boot/dts/qcom-msm8660-surf.dts | 10 +++
|
|
arch/arm/boot/dts/qcom-msm8660.dtsi | 115 ++++++++++++++++++-------------
|
|
2 files changed, 78 insertions(+), 47 deletions(-)
|
|
|
|
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
|
|
index 169bad9..45180ad 100644
|
|
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
|
|
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
|
|
@@ -3,4 +3,14 @@
|
|
/ {
|
|
model = "Qualcomm MSM8660 SURF";
|
|
compatible = "qcom,msm8660-surf", "qcom,msm8660";
|
|
+
|
|
+ soc {
|
|
+ gsbi@19c00000 {
|
|
+ status = "ok";
|
|
+ qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
+ serial@19c40000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
};
|
|
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
|
|
index c52a9e9..53837aaa2f 100644
|
|
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
|
|
@@ -3,6 +3,7 @@
|
|
/include/ "skeleton.dtsi"
|
|
|
|
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
|
|
+#include <dt-bindings/soc/qcom,gsbi.h>
|
|
|
|
/ {
|
|
model = "Qualcomm MSM8660";
|
|
@@ -12,16 +13,18 @@
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
- compatible = "qcom,scorpion";
|
|
- enable-method = "qcom,gcc-msm8660";
|
|
|
|
cpu@0 {
|
|
+ compatible = "qcom,scorpion";
|
|
+ enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
cpu@1 {
|
|
+ compatible = "qcom,scorpion";
|
|
+ enable-method = "qcom,gcc-msm8660";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
@@ -33,55 +36,73 @@
|
|
};
|
|
};
|
|
|
|
- intc: interrupt-controller@2080000 {
|
|
- compatible = "qcom,msm-8660-qgic";
|
|
- interrupt-controller;
|
|
- #interrupt-cells = <3>;
|
|
- reg = < 0x02080000 0x1000 >,
|
|
- < 0x02081000 0x1000 >;
|
|
- };
|
|
+ soc: soc {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+ compatible = "simple-bus";
|
|
|
|
- timer@2000000 {
|
|
- compatible = "qcom,scss-timer", "qcom,msm-timer";
|
|
- interrupts = <1 0 0x301>,
|
|
- <1 1 0x301>,
|
|
- <1 2 0x301>;
|
|
- reg = <0x02000000 0x100>;
|
|
- clock-frequency = <27000000>,
|
|
- <32768>;
|
|
- cpu-offset = <0x40000>;
|
|
- };
|
|
+ intc: interrupt-controller@2080000 {
|
|
+ compatible = "qcom,msm-8660-qgic";
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <3>;
|
|
+ reg = < 0x02080000 0x1000 >,
|
|
+ < 0x02081000 0x1000 >;
|
|
+ };
|
|
|
|
- msmgpio: gpio@800000 {
|
|
- compatible = "qcom,msm-gpio";
|
|
- reg = <0x00800000 0x4000>;
|
|
- gpio-controller;
|
|
- #gpio-cells = <2>;
|
|
- ngpio = <173>;
|
|
- interrupts = <0 16 0x4>;
|
|
- interrupt-controller;
|
|
- #interrupt-cells = <2>;
|
|
- };
|
|
+ timer@2000000 {
|
|
+ compatible = "qcom,scss-timer", "qcom,msm-timer";
|
|
+ interrupts = <1 0 0x301>,
|
|
+ <1 1 0x301>,
|
|
+ <1 2 0x301>;
|
|
+ reg = <0x02000000 0x100>;
|
|
+ clock-frequency = <27000000>,
|
|
+ <32768>;
|
|
+ cpu-offset = <0x40000>;
|
|
+ };
|
|
|
|
- gcc: clock-controller@900000 {
|
|
- compatible = "qcom,gcc-msm8660";
|
|
- #clock-cells = <1>;
|
|
- #reset-cells = <1>;
|
|
- reg = <0x900000 0x4000>;
|
|
- };
|
|
+ msmgpio: gpio@800000 {
|
|
+ compatible = "qcom,msm-gpio";
|
|
+ reg = <0x00800000 0x4000>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ ngpio = <173>;
|
|
+ interrupts = <0 16 0x4>;
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <2>;
|
|
+ };
|
|
|
|
- serial@19c40000 {
|
|
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
- reg = <0x19c40000 0x1000>,
|
|
- <0x19c00000 0x1000>;
|
|
- interrupts = <0 195 0x0>;
|
|
- clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
|
|
- clock-names = "core", "iface";
|
|
- };
|
|
+ gcc: clock-controller@900000 {
|
|
+ compatible = "qcom,gcc-msm8660";
|
|
+ #clock-cells = <1>;
|
|
+ #reset-cells = <1>;
|
|
+ reg = <0x900000 0x4000>;
|
|
+ };
|
|
+
|
|
+ gsbi12: gsbi@19c00000 {
|
|
+ compatible = "qcom,gsbi-v1.0.0";
|
|
+ reg = <0x19c00000 0x100>;
|
|
+ clocks = <&gcc GSBI12_H_CLK>;
|
|
+ clock-names = "iface";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
|
|
- qcom,ssbi@500000 {
|
|
- compatible = "qcom,ssbi";
|
|
- reg = <0x500000 0x1000>;
|
|
- qcom,controller-type = "pmic-arbiter";
|
|
+ serial@19c40000 {
|
|
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
+ reg = <0x19c40000 0x1000>,
|
|
+ <0x19c00000 0x1000>;
|
|
+ interrupts = <0 195 0x0>;
|
|
+ clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
|
|
+ clock-names = "core", "iface";
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ qcom,ssbi@500000 {
|
|
+ compatible = "qcom,ssbi";
|
|
+ reg = <0x500000 0x1000>;
|
|
+ qcom,controller-type = "pmic-arbiter";
|
|
+ };
|
|
};
|
|
};
|
|
--
|
|
1.7.10.4
|
|
|