openwrtv3/target/linux/ipq806x/patches/0005-ARM-qcom-Split-Qualcomm-support-into-legacy-and-mult.patch
John Crispin 3c1f6e358d ipq806x: Add support for IPQ806x chip family
Patches are generated using the "format-patch" command from the
following location:
*https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base
*rev=0771849495b4128cac2faf7d49c85c729fc48b20
Patches numbered 76/77/102/103 have already been integrated in 3.14.12,
so they're not in this list.

All these patches are either integrated are pending integration into
kernel.org, therefore these patches should go away once the kernel
gets upgraded to 3.16.

Support is currently limited to AP148 board but can be extended to other
platforms in the future.

These changes do not cover ethernet connectivity.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 42334
2014-08-30 09:32:58 +00:00

1482 lines
40 KiB
Diff

From 8c2a00c0129d6f718245f7a613c2bb28976b7973 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@codeaurora.org>
Date: Tue, 21 Jan 2014 17:14:10 -0600
Subject: [PATCH 005/182] ARM: qcom: Split Qualcomm support into legacy and
multiplatform
Introduce a new mach-qcom that will support SoCs that intend to be
multiplatform compatible while keeping mach-msm to legacy SoC/board
support that will not transition over to multiplatform.
As part of this, we move support for MSM8X60, MSM8960 and MSM8974 over
to mach-qcom.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
MAINTAINERS | 8 ++
arch/arm/Kconfig | 7 +-
arch/arm/Kconfig.debug | 2 +-
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/mach-msm/Kconfig | 45 +------
arch/arm/mach-msm/Makefile | 6 -
arch/arm/mach-msm/board-dt.c | 41 ------
arch/arm/mach-msm/platsmp.c | 137 -------------------
arch/arm/mach-msm/scm-boot.c | 39 ------
arch/arm/mach-msm/scm-boot.h | 22 ---
arch/arm/mach-msm/scm.c | 299 -----------------------------------------
arch/arm/mach-msm/scm.h | 25 ----
arch/arm/mach-qcom/Kconfig | 33 +++++
arch/arm/mach-qcom/Makefile | 5 +
arch/arm/mach-qcom/board.c | 40 ++++++
arch/arm/mach-qcom/platsmp.c | 137 +++++++++++++++++++
arch/arm/mach-qcom/scm-boot.c | 39 ++++++
arch/arm/mach-qcom/scm-boot.h | 22 +++
arch/arm/mach-qcom/scm.c | 299 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-qcom/scm.h | 25 ++++
21 files changed, 619 insertions(+), 619 deletions(-)
delete mode 100644 arch/arm/mach-msm/board-dt.c
delete mode 100644 arch/arm/mach-msm/platsmp.c
delete mode 100644 arch/arm/mach-msm/scm-boot.c
delete mode 100644 arch/arm/mach-msm/scm-boot.h
delete mode 100644 arch/arm/mach-msm/scm.c
delete mode 100644 arch/arm/mach-msm/scm.h
create mode 100644 arch/arm/mach-qcom/Kconfig
create mode 100644 arch/arm/mach-qcom/Makefile
create mode 100644 arch/arm/mach-qcom/board.c
create mode 100644 arch/arm/mach-qcom/platsmp.c
create mode 100644 arch/arm/mach-qcom/scm-boot.c
create mode 100644 arch/arm/mach-qcom/scm-boot.h
create mode 100644 arch/arm/mach-qcom/scm.c
create mode 100644 arch/arm/mach-qcom/scm.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 900d98e..7d23402 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1168,6 +1168,14 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
S: Maintained
+ARM/QUALCOMM SUPPORT
+M: Kumar Gala <galak@codeaurora.org>
+M: David Brown <davidb@codeaurora.org>
+L: linux-arm-msm@vger.kernel.org
+S: Maintained
+F: arch/arm/mach-qcom/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
+
ARM/RADISYS ENP2611 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1594945..d02ce70 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -657,9 +657,8 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MSM_NODT
- bool "Qualcomm MSM"
- select ARCH_MSM
+config ARCH_MSM
+ bool "Qualcomm MSM (non-multiplatform)"
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK
select GENERIC_CLOCKEVENTS
@@ -1005,6 +1004,8 @@ source "arch/arm/plat-pxa/Kconfig"
source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-qcom/Kconfig"
+
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0531da8..4491c7b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -956,7 +956,7 @@ config DEBUG_STI_UART
config DEBUG_MSM_UART
bool
- depends on ARCH_MSM
+ depends on ARCH_MSM || ARCH_QCOM
config DEBUG_LL_INCLUDE
string
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 08a9ef5..51e5bed 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
machine-$(CONFIG_ARCH_PXA) += pxa
+machine-$(CONFIG_ARCH_QCOM) += qcom
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0320303..4a89023 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -119,9 +119,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
@@ -234,6 +231,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
dra7-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb \
+ qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 3c4eca7..a7f959e 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,50 +1,9 @@
-config ARCH_MSM
- bool
-
-config ARCH_MSM_DT
- bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7
- select ARCH_MSM
- select ARCH_REQUIRE_GPIOLIB
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- help
- Support for Qualcomm's devicetree based MSM systems.
-
if ARCH_MSM
-menu "Qualcomm MSM SoC Selection"
- depends on ARCH_MSM_DT
-
-config ARCH_MSM8X60
- bool "Enable support for MSM8X60"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MSM_SCM if SMP
- select CLKSRC_QCOM
-
-config ARCH_MSM8960
- bool "Enable support for MSM8960"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MSM_SCM if SMP
- select CLKSRC_QCOM
-
-config ARCH_MSM8974
- bool "Enable support for MSM8974"
- select ARM_GIC
- select CPU_V7
- select HAVE_ARM_ARCH_TIMER
- select HAVE_SMP
- select MSM_SCM if SMP
-
-endmenu
-
choice
prompt "Qualcomm MSM SoC Type"
default ARCH_MSM7X00A
- depends on ARCH_MSM_NODT
+ depends on ARCH_MSM
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
@@ -99,7 +58,7 @@ config MSM_VIC
bool
menu "Qualcomm MSM Board Type"
- depends on ARCH_MSM_NODT
+ depends on ARCH_MSM
config MACH_HALIBUT
depends on ARCH_MSM
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 04b1bee..27c078a 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -13,17 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
-
-CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
-
-obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-msm/board-dt.c
deleted file mode 100644
index 1f11d93..0000000
--- a/arch/arm/mach-msm/board-dt.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static const char * const msm_dt_match[] __initconst = {
- "qcom,msm8660-fluid",
- "qcom,msm8660-surf",
- "qcom,msm8960-cdp",
- NULL
-};
-
-static const char * const apq8074_dt_match[] __initconst = {
- "qcom,apq8074-dragonboard",
- NULL
-};
-
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
- .smp = smp_ops(msm_smp_ops),
- .dt_compat = msm_dt_match,
-MACHINE_END
-
-DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
- .dt_compat = apq8074_dt_match,
-MACHINE_END
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
deleted file mode 100644
index 251a91e..0000000
--- a/arch/arm/mach-msm/platsmp.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/smp_plat.h>
-
-#include "scm-boot.h"
-#include "common.h"
-
-#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
-#define SCSS_CPU1CORE_RESET 0xD80
-#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-
-extern void secondary_startup(void);
-
-static DEFINE_SPINLOCK(boot_lock);
-
-#ifdef CONFIG_HOTPLUG_CPU
-static void __ref msm_cpu_die(unsigned int cpu)
-{
- wfi();
-}
-#endif
-
-static inline int get_core_count(void)
-{
- /* 1 + the PART[1:0] field of MIDR */
- return ((read_cpuid_id() >> 4) & 3) + 1;
-}
-
-static void msm_secondary_init(unsigned int cpu)
-{
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
-}
-
-static void prepare_cold_cpu(unsigned int cpu)
-{
- int ret;
- ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
- SCM_FLAG_COLDBOOT_CPU1);
- if (ret == 0) {
- void __iomem *sc1_base_ptr;
- sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
- if (sc1_base_ptr) {
- writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
- writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
- writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
- iounmap(sc1_base_ptr);
- }
- } else
- printk(KERN_DEBUG "Failed to set secondary core boot "
- "address\n");
-}
-
-static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- static int cold_boot_done;
-
- /* Only need to bring cpu out of reset this way once */
- if (cold_boot_done == false) {
- prepare_cold_cpu(cpu);
- cold_boot_done = true;
- }
-
- /*
- * set synchronisation state between this boot processor
- * and the secondary one
- */
- spin_lock(&boot_lock);
-
- /*
- * Send the secondary CPU a soft interrupt, thereby causing
- * the boot monitor to read the system wide flags register,
- * and branch to the address found there.
- */
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system. The msm8x60
- * does not support the ARM SCU, so just set the possible cpu mask to
- * NR_CPUS.
- */
-static void __init msm_smp_init_cpus(void)
-{
- unsigned int i, ncores = get_core_count();
-
- if (ncores > nr_cpu_ids) {
- pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
- ncores, nr_cpu_ids);
- ncores = nr_cpu_ids;
- }
-
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
-}
-
-static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
-{
-}
-
-struct smp_operations msm_smp_ops __initdata = {
- .smp_init_cpus = msm_smp_init_cpus,
- .smp_prepare_cpus = msm_smp_prepare_cpus,
- .smp_secondary_init = msm_secondary_init,
- .smp_boot_secondary = msm_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
- .cpu_die = msm_cpu_die,
-#endif
-};
diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-msm/scm-boot.c
deleted file mode 100644
index 45cee3e..0000000
--- a/arch/arm/mach-msm/scm-boot.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include "scm.h"
-#include "scm-boot.h"
-
-/*
- * Set the cold/warm boot address for one of the CPU cores.
- */
-int scm_set_boot_addr(phys_addr_t addr, int flags)
-{
- struct {
- unsigned int flags;
- phys_addr_t addr;
- } cmd;
-
- cmd.addr = addr;
- cmd.flags = flags;
- return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
- &cmd, sizeof(cmd), NULL, 0);
-}
-EXPORT_SYMBOL(scm_set_boot_addr);
diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-msm/scm-boot.h
deleted file mode 100644
index 7be32ff..0000000
--- a/arch/arm/mach-msm/scm-boot.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_BOOT_H
-#define __MACH_SCM_BOOT_H
-
-#define SCM_BOOT_ADDR 0x1
-#define SCM_FLAG_COLDBOOT_CPU1 0x1
-#define SCM_FLAG_WARMBOOT_CPU1 0x2
-#define SCM_FLAG_WARMBOOT_CPU0 0x4
-
-int scm_set_boot_addr(phys_addr_t addr, int flags);
-
-#endif
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c
deleted file mode 100644
index c536fd6..0000000
--- a/arch/arm/mach-msm/scm.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-
-#include <asm/cacheflush.h>
-
-#include "scm.h"
-
-/* Cache line size for msm8x60 */
-#define CACHELINESIZE 32
-
-#define SCM_ENOMEM -5
-#define SCM_EOPNOTSUPP -4
-#define SCM_EINVAL_ADDR -3
-#define SCM_EINVAL_ARG -2
-#define SCM_ERROR -1
-#define SCM_INTERRUPTED 1
-
-static DEFINE_MUTEX(scm_lock);
-
-/**
- * struct scm_command - one SCM command buffer
- * @len: total available memory for command and response
- * @buf_offset: start of command buffer
- * @resp_hdr_offset: start of response buffer
- * @id: command to be executed
- * @buf: buffer returned from scm_get_command_buffer()
- *
- * An SCM command is laid out in memory as follows:
- *
- * ------------------- <--- struct scm_command
- * | command header |
- * ------------------- <--- scm_get_command_buffer()
- * | command buffer |
- * ------------------- <--- struct scm_response and
- * | response header | scm_command_to_response()
- * ------------------- <--- scm_get_response_buffer()
- * | response buffer |
- * -------------------
- *
- * There can be arbitrary padding between the headers and buffers so
- * you should always use the appropriate scm_get_*_buffer() routines
- * to access the buffers in a safe manner.
- */
-struct scm_command {
- u32 len;
- u32 buf_offset;
- u32 resp_hdr_offset;
- u32 id;
- u32 buf[0];
-};
-
-/**
- * struct scm_response - one SCM response buffer
- * @len: total available memory for response
- * @buf_offset: start of response data relative to start of scm_response
- * @is_complete: indicates if the command has finished processing
- */
-struct scm_response {
- u32 len;
- u32 buf_offset;
- u32 is_complete;
-};
-
-/**
- * alloc_scm_command() - Allocate an SCM command
- * @cmd_size: size of the command buffer
- * @resp_size: size of the response buffer
- *
- * Allocate an SCM command, including enough room for the command
- * and response headers as well as the command and response buffers.
- *
- * Returns a valid &scm_command on success or %NULL if the allocation fails.
- */
-static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
-{
- struct scm_command *cmd;
- size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
- resp_size;
-
- cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
- if (cmd) {
- cmd->len = len;
- cmd->buf_offset = offsetof(struct scm_command, buf);
- cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
- }
- return cmd;
-}
-
-/**
- * free_scm_command() - Free an SCM command
- * @cmd: command to free
- *
- * Free an SCM command.
- */
-static inline void free_scm_command(struct scm_command *cmd)
-{
- kfree(cmd);
-}
-
-/**
- * scm_command_to_response() - Get a pointer to a scm_response
- * @cmd: command
- *
- * Returns a pointer to a response for a command.
- */
-static inline struct scm_response *scm_command_to_response(
- const struct scm_command *cmd)
-{
- return (void *)cmd + cmd->resp_hdr_offset;
-}
-
-/**
- * scm_get_command_buffer() - Get a pointer to a command buffer
- * @cmd: command
- *
- * Returns a pointer to the command buffer of a command.
- */
-static inline void *scm_get_command_buffer(const struct scm_command *cmd)
-{
- return (void *)cmd->buf;
-}
-
-/**
- * scm_get_response_buffer() - Get a pointer to a response buffer
- * @rsp: response
- *
- * Returns a pointer to a response buffer of a response.
- */
-static inline void *scm_get_response_buffer(const struct scm_response *rsp)
-{
- return (void *)rsp + rsp->buf_offset;
-}
-
-static int scm_remap_error(int err)
-{
- switch (err) {
- case SCM_ERROR:
- return -EIO;
- case SCM_EINVAL_ADDR:
- case SCM_EINVAL_ARG:
- return -EINVAL;
- case SCM_EOPNOTSUPP:
- return -EOPNOTSUPP;
- case SCM_ENOMEM:
- return -ENOMEM;
- }
- return -EINVAL;
-}
-
-static u32 smc(u32 cmd_addr)
-{
- int context_id;
- register u32 r0 asm("r0") = 1;
- register u32 r1 asm("r1") = (u32)&context_id;
- register u32 r2 asm("r2") = cmd_addr;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r0")
- __asmeq("%2", "r1")
- __asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0)
- : "r" (r0), "r" (r1), "r" (r2)
- : "r3");
- } while (r0 == SCM_INTERRUPTED);
-
- return r0;
-}
-
-static int __scm_call(const struct scm_command *cmd)
-{
- int ret;
- u32 cmd_addr = virt_to_phys(cmd);
-
- /*
- * Flush the entire cache here so callers don't have to remember
- * to flush the cache when passing physical addresses to the secure
- * side in the buffer.
- */
- flush_cache_all();
- ret = smc(cmd_addr);
- if (ret < 0)
- ret = scm_remap_error(ret);
-
- return ret;
-}
-
-/**
- * scm_call() - Send an SCM command
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @cmd_buf: command buffer
- * @cmd_len: length of the command buffer
- * @resp_buf: response buffer
- * @resp_len: length of the response buffer
- *
- * Sends a command to the SCM and waits for the command to finish processing.
- */
-int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
- void *resp_buf, size_t resp_len)
-{
- int ret;
- struct scm_command *cmd;
- struct scm_response *rsp;
-
- cmd = alloc_scm_command(cmd_len, resp_len);
- if (!cmd)
- return -ENOMEM;
-
- cmd->id = (svc_id << 10) | cmd_id;
- if (cmd_buf)
- memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
-
- mutex_lock(&scm_lock);
- ret = __scm_call(cmd);
- mutex_unlock(&scm_lock);
- if (ret)
- goto out;
-
- rsp = scm_command_to_response(cmd);
- do {
- u32 start = (u32)rsp;
- u32 end = (u32)scm_get_response_buffer(rsp) + resp_len;
- start &= ~(CACHELINESIZE - 1);
- while (start < end) {
- asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
- : "memory");
- start += CACHELINESIZE;
- }
- } while (!rsp->is_complete);
-
- if (resp_buf)
- memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
-out:
- free_scm_command(cmd);
- return ret;
-}
-EXPORT_SYMBOL(scm_call);
-
-u32 scm_get_version(void)
-{
- int context_id;
- static u32 version = -1;
- register u32 r0 asm("r0");
- register u32 r1 asm("r1");
-
- if (version != -1)
- return version;
-
- mutex_lock(&scm_lock);
-
- r0 = 0x1 << 8;
- r1 = (u32)&context_id;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r1")
- __asmeq("%2", "r0")
- __asmeq("%3", "r1")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0), "=r" (r1)
- : "r" (r0), "r" (r1)
- : "r2", "r3");
- } while (r0 == SCM_INTERRUPTED);
-
- version = r1;
- mutex_unlock(&scm_lock);
-
- return version;
-}
-EXPORT_SYMBOL(scm_get_version);
diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-msm/scm.h
deleted file mode 100644
index 00b31ea..0000000
--- a/arch/arm/mach-msm/scm.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_H
-#define __MACH_SCM_H
-
-#define SCM_SVC_BOOT 0x1
-#define SCM_SVC_PIL 0x2
-
-extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
- void *resp_buf, size_t resp_len);
-
-#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
-
-extern u32 scm_get_version(void);
-
-#endif
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
new file mode 100644
index 0000000..a028be2
--- /dev/null
+++ b/arch/arm/mach-qcom/Kconfig
@@ -0,0 +1,33 @@
+config ARCH_QCOM
+ bool "Qualcomm Support" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_GIC
+ select CLKSRC_OF
+ select GENERIC_CLOCKEVENTS
+ select HAVE_SMP
+ select QCOM_SCM if SMP
+ help
+ Support for Qualcomm's devicetree based systems.
+
+if ARCH_QCOM
+
+menu "Qualcomm SoC Selection"
+
+config ARCH_MSM8X60
+ bool "Enable support for MSM8X60"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8960
+ bool "Enable support for MSM8960"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8974
+ bool "Enable support for MSM8974"
+ select HAVE_ARM_ARCH_TIMER
+
+endmenu
+
+config QCOM_SCM
+ bool
+
+endif
diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
new file mode 100644
index 0000000..8f756ae
--- /dev/null
+++ b/arch/arm/mach-qcom/Makefile
@@ -0,0 +1,5 @@
+obj-y := board.o
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o
+
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
new file mode 100644
index 0000000..4529f6b
--- /dev/null
+++ b/arch/arm/mach-qcom/board.c
@@ -0,0 +1,40 @@
+/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+extern struct smp_operations msm_smp_ops;
+
+static const char * const qcom_dt_match[] __initconst = {
+ "qcom,msm8660-surf",
+ "qcom,msm8960-cdp",
+ NULL
+};
+
+static const char * const apq8074_dt_match[] __initconst = {
+ "qcom,apq8074-dragonboard",
+ NULL
+};
+
+DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
+ .smp = smp_ops(msm_smp_ops),
+ .dt_compat = qcom_dt_match,
+MACHINE_END
+
+DT_MACHINE_START(APQ_DT, "Qualcomm (Flattened Device Tree)")
+ .dt_compat = apq8074_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
new file mode 100644
index 0000000..67823a7
--- /dev/null
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/smp_plat.h>
+
+#include "scm-boot.h"
+
+#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
+#define SCSS_CPU1CORE_RESET 0xD80
+#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
+
+extern void secondary_startup(void);
+
+static DEFINE_SPINLOCK(boot_lock);
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void __ref msm_cpu_die(unsigned int cpu)
+{
+ wfi();
+}
+#endif
+
+static inline int get_core_count(void)
+{
+ /* 1 + the PART[1:0] field of MIDR */
+ return ((read_cpuid_id() >> 4) & 3) + 1;
+}
+
+static void msm_secondary_init(unsigned int cpu)
+{
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+static void prepare_cold_cpu(unsigned int cpu)
+{
+ int ret;
+ ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
+ SCM_FLAG_COLDBOOT_CPU1);
+ if (ret == 0) {
+ void __iomem *sc1_base_ptr;
+ sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
+ if (sc1_base_ptr) {
+ writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
+ writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
+ writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
+ iounmap(sc1_base_ptr);
+ }
+ } else
+ printk(KERN_DEBUG "Failed to set secondary core boot "
+ "address\n");
+}
+
+static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ static int cold_boot_done;
+
+ /* Only need to bring cpu out of reset this way once */
+ if (cold_boot_done == false) {
+ prepare_cold_cpu(cpu);
+ cold_boot_done = true;
+ }
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * Send the secondary CPU a soft interrupt, thereby causing
+ * the boot monitor to read the system wide flags register,
+ * and branch to the address found there.
+ */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system. The msm8x60
+ * does not support the ARM SCU, so just set the possible cpu mask to
+ * NR_CPUS.
+ */
+static void __init msm_smp_init_cpus(void)
+{
+ unsigned int i, ncores = get_core_count();
+
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct smp_operations msm_smp_ops __initdata = {
+ .smp_init_cpus = msm_smp_init_cpus,
+ .smp_prepare_cpus = msm_smp_prepare_cpus,
+ .smp_secondary_init = msm_secondary_init,
+ .smp_boot_secondary = msm_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = msm_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-qcom/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c
new file mode 100644
index 0000000..45cee3e
--- /dev/null
+++ b/arch/arm/mach-qcom/scm-boot.c
@@ -0,0 +1,39 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "scm.h"
+#include "scm-boot.h"
+
+/*
+ * Set the cold/warm boot address for one of the CPU cores.
+ */
+int scm_set_boot_addr(phys_addr_t addr, int flags)
+{
+ struct {
+ unsigned int flags;
+ phys_addr_t addr;
+ } cmd;
+
+ cmd.addr = addr;
+ cmd.flags = flags;
+ return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
+ &cmd, sizeof(cmd), NULL, 0);
+}
+EXPORT_SYMBOL(scm_set_boot_addr);
diff --git a/arch/arm/mach-qcom/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h
new file mode 100644
index 0000000..7be32ff
--- /dev/null
+++ b/arch/arm/mach-qcom/scm-boot.h
@@ -0,0 +1,22 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_SCM_BOOT_H
+#define __MACH_SCM_BOOT_H
+
+#define SCM_BOOT_ADDR 0x1
+#define SCM_FLAG_COLDBOOT_CPU1 0x1
+#define SCM_FLAG_WARMBOOT_CPU1 0x2
+#define SCM_FLAG_WARMBOOT_CPU0 0x4
+
+int scm_set_boot_addr(phys_addr_t addr, int flags);
+
+#endif
diff --git a/arch/arm/mach-qcom/scm.c b/arch/arm/mach-qcom/scm.c
new file mode 100644
index 0000000..c536fd6
--- /dev/null
+++ b/arch/arm/mach-qcom/scm.c
@@ -0,0 +1,299 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/cacheflush.h>
+
+#include "scm.h"
+
+/* Cache line size for msm8x60 */
+#define CACHELINESIZE 32
+
+#define SCM_ENOMEM -5
+#define SCM_EOPNOTSUPP -4
+#define SCM_EINVAL_ADDR -3
+#define SCM_EINVAL_ARG -2
+#define SCM_ERROR -1
+#define SCM_INTERRUPTED 1
+
+static DEFINE_MUTEX(scm_lock);
+
+/**
+ * struct scm_command - one SCM command buffer
+ * @len: total available memory for command and response
+ * @buf_offset: start of command buffer
+ * @resp_hdr_offset: start of response buffer
+ * @id: command to be executed
+ * @buf: buffer returned from scm_get_command_buffer()
+ *
+ * An SCM command is laid out in memory as follows:
+ *
+ * ------------------- <--- struct scm_command
+ * | command header |
+ * ------------------- <--- scm_get_command_buffer()
+ * | command buffer |
+ * ------------------- <--- struct scm_response and
+ * | response header | scm_command_to_response()
+ * ------------------- <--- scm_get_response_buffer()
+ * | response buffer |
+ * -------------------
+ *
+ * There can be arbitrary padding between the headers and buffers so
+ * you should always use the appropriate scm_get_*_buffer() routines
+ * to access the buffers in a safe manner.
+ */
+struct scm_command {
+ u32 len;
+ u32 buf_offset;
+ u32 resp_hdr_offset;
+ u32 id;
+ u32 buf[0];
+};
+
+/**
+ * struct scm_response - one SCM response buffer
+ * @len: total available memory for response
+ * @buf_offset: start of response data relative to start of scm_response
+ * @is_complete: indicates if the command has finished processing
+ */
+struct scm_response {
+ u32 len;
+ u32 buf_offset;
+ u32 is_complete;
+};
+
+/**
+ * alloc_scm_command() - Allocate an SCM command
+ * @cmd_size: size of the command buffer
+ * @resp_size: size of the response buffer
+ *
+ * Allocate an SCM command, including enough room for the command
+ * and response headers as well as the command and response buffers.
+ *
+ * Returns a valid &scm_command on success or %NULL if the allocation fails.
+ */
+static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
+{
+ struct scm_command *cmd;
+ size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
+ resp_size;
+
+ cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
+ if (cmd) {
+ cmd->len = len;
+ cmd->buf_offset = offsetof(struct scm_command, buf);
+ cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
+ }
+ return cmd;
+}
+
+/**
+ * free_scm_command() - Free an SCM command
+ * @cmd: command to free
+ *
+ * Free an SCM command.
+ */
+static inline void free_scm_command(struct scm_command *cmd)
+{
+ kfree(cmd);
+}
+
+/**
+ * scm_command_to_response() - Get a pointer to a scm_response
+ * @cmd: command
+ *
+ * Returns a pointer to a response for a command.
+ */
+static inline struct scm_response *scm_command_to_response(
+ const struct scm_command *cmd)
+{
+ return (void *)cmd + cmd->resp_hdr_offset;
+}
+
+/**
+ * scm_get_command_buffer() - Get a pointer to a command buffer
+ * @cmd: command
+ *
+ * Returns a pointer to the command buffer of a command.
+ */
+static inline void *scm_get_command_buffer(const struct scm_command *cmd)
+{
+ return (void *)cmd->buf;
+}
+
+/**
+ * scm_get_response_buffer() - Get a pointer to a response buffer
+ * @rsp: response
+ *
+ * Returns a pointer to a response buffer of a response.
+ */
+static inline void *scm_get_response_buffer(const struct scm_response *rsp)
+{
+ return (void *)rsp + rsp->buf_offset;
+}
+
+static int scm_remap_error(int err)
+{
+ switch (err) {
+ case SCM_ERROR:
+ return -EIO;
+ case SCM_EINVAL_ADDR:
+ case SCM_EINVAL_ARG:
+ return -EINVAL;
+ case SCM_EOPNOTSUPP:
+ return -EOPNOTSUPP;
+ case SCM_ENOMEM:
+ return -ENOMEM;
+ }
+ return -EINVAL;
+}
+
+static u32 smc(u32 cmd_addr)
+{
+ int context_id;
+ register u32 r0 asm("r0") = 1;
+ register u32 r1 asm("r1") = (u32)&context_id;
+ register u32 r2 asm("r2") = cmd_addr;
+ do {
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r0")
+ __asmeq("%2", "r1")
+ __asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0)
+ : "r" (r0), "r" (r1), "r" (r2)
+ : "r3");
+ } while (r0 == SCM_INTERRUPTED);
+
+ return r0;
+}
+
+static int __scm_call(const struct scm_command *cmd)
+{
+ int ret;
+ u32 cmd_addr = virt_to_phys(cmd);
+
+ /*
+ * Flush the entire cache here so callers don't have to remember
+ * to flush the cache when passing physical addresses to the secure
+ * side in the buffer.
+ */
+ flush_cache_all();
+ ret = smc(cmd_addr);
+ if (ret < 0)
+ ret = scm_remap_error(ret);
+
+ return ret;
+}
+
+/**
+ * scm_call() - Send an SCM command
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @cmd_buf: command buffer
+ * @cmd_len: length of the command buffer
+ * @resp_buf: response buffer
+ * @resp_len: length of the response buffer
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ */
+int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
+ void *resp_buf, size_t resp_len)
+{
+ int ret;
+ struct scm_command *cmd;
+ struct scm_response *rsp;
+
+ cmd = alloc_scm_command(cmd_len, resp_len);
+ if (!cmd)
+ return -ENOMEM;
+
+ cmd->id = (svc_id << 10) | cmd_id;
+ if (cmd_buf)
+ memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
+
+ mutex_lock(&scm_lock);
+ ret = __scm_call(cmd);
+ mutex_unlock(&scm_lock);
+ if (ret)
+ goto out;
+
+ rsp = scm_command_to_response(cmd);
+ do {
+ u32 start = (u32)rsp;
+ u32 end = (u32)scm_get_response_buffer(rsp) + resp_len;
+ start &= ~(CACHELINESIZE - 1);
+ while (start < end) {
+ asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
+ : "memory");
+ start += CACHELINESIZE;
+ }
+ } while (!rsp->is_complete);
+
+ if (resp_buf)
+ memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
+out:
+ free_scm_command(cmd);
+ return ret;
+}
+EXPORT_SYMBOL(scm_call);
+
+u32 scm_get_version(void)
+{
+ int context_id;
+ static u32 version = -1;
+ register u32 r0 asm("r0");
+ register u32 r1 asm("r1");
+
+ if (version != -1)
+ return version;
+
+ mutex_lock(&scm_lock);
+
+ r0 = 0x1 << 8;
+ r1 = (u32)&context_id;
+ do {
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r1")
+ __asmeq("%2", "r0")
+ __asmeq("%3", "r1")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0), "=r" (r1)
+ : "r" (r0), "r" (r1)
+ : "r2", "r3");
+ } while (r0 == SCM_INTERRUPTED);
+
+ version = r1;
+ mutex_unlock(&scm_lock);
+
+ return version;
+}
+EXPORT_SYMBOL(scm_get_version);
diff --git a/arch/arm/mach-qcom/scm.h b/arch/arm/mach-qcom/scm.h
new file mode 100644
index 0000000..00b31ea
--- /dev/null
+++ b/arch/arm/mach-qcom/scm.h
@@ -0,0 +1,25 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_SCM_H
+#define __MACH_SCM_H
+
+#define SCM_SVC_BOOT 0x1
+#define SCM_SVC_PIL 0x2
+
+extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
+ void *resp_buf, size_t resp_len);
+
+#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
+
+extern u32 scm_get_version(void);
+
+#endif
--
1.7.10.4