openwrtv3/target/linux/layerscape/patches-4.4/7066-fmd-add-2.5G-SGMII-mode-suport.patch
Yutang Jiang c6c731fe31 layerscape: add 64b/32b target for ls1043ardb device
Add support for NXP layerscape ls1043ardb 64b/32b Dev board.

LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores.
ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC,
I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc.

64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from
NXP QorIQ SDK release.

All of 4.4 kernel patches porting from SDK release or upstream.

QorIQ SDK ISOs can be downloaded from this location:
http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00

38 lines
1.5 KiB
Diff

From 95d12688fa875f7a00590aaf6de5f34d55531d68 Mon Sep 17 00:00:00 2001
From: Madalin Bucur <madalin.bucur@freescale.com>
Date: Thu, 14 Apr 2016 14:12:38 +0300
Subject: [PATCH 66/70] fmd: add 2.5G SGMII mode suport
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/sdk_dpaa/mac.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
@@ -74,6 +74,7 @@ static const char phy_str[][11] = {
[PHY_INTERFACE_MODE_RGMII_TXID] = "rgmii-txid",
[PHY_INTERFACE_MODE_RTBI] = "rtbi",
[PHY_INTERFACE_MODE_XGMII] = "xgmii",
+ [PHY_INTERFACE_MODE_SGMII_2500] = "sgmii-2500",
};
static phy_interface_t __pure __attribute__((nonnull)) str2phy(const char *str)
@@ -100,6 +101,7 @@ static const uint16_t phy2speed[] = {
[PHY_INTERFACE_MODE_RGMII_TXID] = SPEED_1000,
[PHY_INTERFACE_MODE_RTBI] = SPEED_1000,
[PHY_INTERFACE_MODE_XGMII] = SPEED_10000,
+ [PHY_INTERFACE_MODE_SGMII_2500] = SPEED_2500,
};
static struct mac_device * __cold
@@ -335,7 +337,8 @@ static int __cold mac_probe(struct platf
mac_dev->max_speed = mac_dev->speed;
mac_dev->if_support = DTSEC_SUPPORTED;
/* We don't support half-duplex in SGMII mode */
- if (strstr(char_prop, "sgmii") || strstr(char_prop, "qsgmii"))
+ if (strstr(char_prop, "sgmii") || strstr(char_prop, "qsgmii") ||
+ strstr(char_prop, "sgmii-2500"))
mac_dev->if_support &= ~(SUPPORTED_10baseT_Half |
SUPPORTED_100baseT_Half);