3a112113e7
This patch adds support for the amcc,usb-otg-405ex device which is found in all APM82181 SoCs. Note: The system can't use the generic "snps,dwc2" compatible because of the special ahbcfg configuration. The default GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang when the USB and SATA is used concurrently. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
44 lines
1.4 KiB
Diff
44 lines
1.4 KiB
Diff
--- a/drivers/usb/dwc2/platform.c
|
|
+++ b/drivers/usb/dwc2/platform.c
|
|
@@ -115,6 +115,37 @@ static const struct dwc2_core_params par
|
|
.hibernation = -1,
|
|
};
|
|
|
|
+static const struct dwc2_core_params params_amcc_dwc_otg = {
|
|
+ .otg_cap = DWC2_CAP_PARAM_HNP_SRP_CAPABLE,
|
|
+ .otg_ver = -1,
|
|
+ .dma_enable = -1,
|
|
+ .dma_desc_enable = -1,
|
|
+ .speed = -1,
|
|
+ .enable_dynamic_fifo = -1,
|
|
+ .en_multiple_tx_fifo = -1,
|
|
+ .host_rx_fifo_size = -1,
|
|
+ .host_nperio_tx_fifo_size = -1,
|
|
+ .host_perio_tx_fifo_size = -1,
|
|
+ .max_transfer_size = -1,
|
|
+ .max_packet_count = -1,
|
|
+ .host_channels = -1,
|
|
+ .phy_type = -1,
|
|
+ .phy_utmi_width = -1,
|
|
+ .phy_ulpi_ddr = -1,
|
|
+ .phy_ulpi_ext_vbus = -1,
|
|
+ .i2c_enable = -1,
|
|
+ .ulpi_fs_ls = -1,
|
|
+ .host_support_fs_ls_low_power = -1,
|
|
+ .host_ls_low_power_phy_clk = -1,
|
|
+ .ts_dline = -1,
|
|
+ .reload_ctl = -1,
|
|
+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
|
|
+ GAHBCFG_HBSTLEN_SHIFT,
|
|
+ .uframe_sched = -1,
|
|
+ .external_id_pin_ctl = -1,
|
|
+ .hibernation = -1,
|
|
+};
|
|
+
|
|
static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(hsotg->dev);
|
|
@@ -309,2 +340,3 @@ static int dwc2_driver_remove(struct pla
|
|
static const struct of_device_id dwc2_of_match_table[] = {
|
|
+ { .compatible = "amcc,usb-otg-405ex", .data = ¶ms_amcc_dwc_otg },
|
|
{ .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 },
|