openwrtv3/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
John Crispin cede06cebc ar71xx: Support for Ubiquiti UniFi AP AC LITE
Add support for the Ubiquiti UniFi AP AC LITE
Signed-off-by: P.Wassi <p.wassi at gmx.at>

SVN-Revision: 48711
2016-02-12 08:31:32 +00:00

109 lines
2.7 KiB
C

/*
* Ubiquiti UniFi AC (LITE) board support
*
* Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
*
* Derived from: mach-ubnt-xm.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/etherdevice.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/irq.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <linux/platform_data/phy-at803x.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define UNIFIAC_KEYS_POLL_INTERVAL 20
#define UNIFIAC_KEYS_DEBOUNCE_INTERVAL (3 * UNIFIAC_KEYS_POLL_INTERVAL)
#define UNIFIAC_GPIO_LED_WHITE 7
#define UNIFIAC_GPIO_LED_BLUE 8
#define UNIFIAC_GPIO_BTN_RESET 2
#define UNIFIAC_MAC0_OFFSET 0x0000
#define UNIFIAC_WMAC_CALDATA_OFFSET 0x1000
#define UNIFIAC_PCI_CALDATA_OFFSET 0x5000
static struct flash_platform_data ubnt_unifiac_flash_data = {
/* mx25l12805d and mx25l12835f have the same JEDEC ID */
.type = "mx25l12805d",
};
static struct gpio_led ubnt_unifiac_leds_gpio[] __initdata = {
{
.name = "ubnt:white:dome",
.gpio = UNIFIAC_GPIO_LED_WHITE,
.active_low = 0,
}, {
.name = "ubnt:blue:dome",
.gpio = UNIFIAC_GPIO_LED_BLUE,
.active_low = 0,
}
};
static struct gpio_keys_button ubnt_unifiac_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = UNIFIAC_KEYS_DEBOUNCE_INTERVAL,
.gpio = UNIFIAC_GPIO_BTN_RESET,
.active_low = 1,
}
};
static void __init ubnt_unifiac_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(&ubnt_unifiac_flash_data);
ath79_init_mac(ath79_eth0_data.mac_addr,
eeprom + UNIFIAC_MAC0_OFFSET, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth0_data.phy_mask = BIT(4);
ath79_eth0_pll_data.pll_10 = 0x00001313;
ath79_register_mdio(0, ~BIT(4));
ath79_register_eth(0);
ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
ubnt_unifiac_leds_gpio);
ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ubnt_unifiac_gpio_keys),
ubnt_unifiac_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC, "UBNT-UF-AC", "Ubiquiti UniFi-AC",
ubnt_unifiac_setup);