openwrtv3/target/linux/brcm63xx/patches-3.18/529-board_fast2604.patch
Jonas Gorski 387fd3ca26 brcm63xx: add kernel 3.18 support
Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461
2014-12-01 13:27:26 +00:00

76 lines
1.9 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1103,6 +1103,57 @@ static struct board_info __initdata boar
.has_ehci0 = 1,
};
+static struct board_info __initdata board_FAST2604 = {
+ .name = "F@ST2604",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+
+ .has_enet1 = 1,
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "F@ST2604:green:power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "F@ST2604:red:power",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2604:red:inet",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "F@ST2604:green:wps",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ },
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 33,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+
static struct board_info __initdata board_rta1025w_16 = {
.name = "RTA1025W_16",
.expected_cpu_id = 0x6348,
@@ -2645,6 +2696,7 @@ static const struct board_info __initcon
&board_96348gw_10,
&board_96348gw_11,
&board_FAST2404,
+ &board_FAST2604,
&board_DV201AMR,
&board_96348gw_a,
&board_rta1025w_16,
@@ -2712,6 +2764,7 @@ static struct of_device_id const bcm963x
{ .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
{ .compatible = "sagem,f@st2404", .data = &board_FAST2404, },
+ { .compatible = "sagem,f@st2604", .data = &board_FAST2604, },
{ .compatible = "t-com,spw500v", .data = &board_spw500v, },
{ .compatible = "tecom,gw6000", .data = &board_gw6000, },
{ .compatible = "tecom,gw6200", .data = &board_gw6200, },