openwrtv3/package
Mathias Kresin 36148d923b uboot-lantiq: Add BT Home Hub 5A support
Based on the submission to the uboot-lantiq repo by Martin Blumenstingl.

Use the ddr_settings.h from the GPL tarball. The NAND boot optimized
one (with memory tuning enabled) doesn't work for the UART boot image.

Use the same mtd layout as the stock u-boot. Add add UBI support.

Use the leds to indicate boot status like it is done with the stock
u-boot. Switch on the red power led if kernel image can't be loaded.
Otherwise switch the green led on.

Make only the ramboot u-boot available. Only this image is required for
the first installation of LEDE.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-29 21:40:16 +01:00
..
base-files base-files: ignore failure of stopping services on removal 2016-11-21 18:40:15 +01:00
boot uboot-lantiq: Add BT Home Hub 5A support 2016-11-29 21:40:16 +01:00
devel devel/strace: fix build only on powerpc arch 2016-11-16 11:03:25 +01:00
firmware ath10k-ct-firmware: Update to latest firmwares. 2016-11-22 10:50:59 +01:00
kernel kernel: mac80211: disable ath9k bands via device tree 2016-11-29 21:40:16 +01:00
libs libnl-tiny: Remove GENL_ID_GENERATE 2016-11-24 12:53:19 +01:00
network iw: drop TX power patch that is part of upstream version now 2016-11-29 08:39:57 +01:00
system opkg: run prerm scripts for the old version also on upgrade 2016-11-21 18:40:15 +01:00
utils package/utils/fuse: update to 2.9.7 2016-11-24 12:53:17 +01:00
Makefile image: fix CONFIG_CLEAN_IPKG with CONFIG_TARGET_PER_DEVICE_ROOTFS 2016-09-25 09:30:55 +02:00