20402106a3
As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
134 lines
4.2 KiB
Diff
134 lines
4.2 KiB
Diff
From 7182f4321e85d4911762f7dd2b38e6e1a7919073 Mon Sep 17 00:00:00 2001
|
|
From: Martin Sperl <kernel@martin.sperl.org>
|
|
Date: Mon, 29 Feb 2016 11:39:21 +0000
|
|
Subject: [PATCH 256/423] clk: bcm2835: correctly enable fractional clock
|
|
support
|
|
|
|
The current driver calculates the clock divider with
|
|
fractional support enabled.
|
|
|
|
But it does not enable fractional support in the
|
|
control register itself resulting in an integer only divider,
|
|
but in clk_set_rate responds back the fractionally divided
|
|
clock frequency.
|
|
|
|
This patch enables fractional support in the control register
|
|
whenever there is a fractional bit set in the requested clock divider.
|
|
|
|
Mash clock limits are are also handled for the PWM clock
|
|
applying the correct divider limits (2 and max_int) applicable to
|
|
basic fractional divider support (mash order of 1).
|
|
|
|
It also adds locking to protect the read/modify/write cycle of
|
|
the register modification.
|
|
|
|
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the
|
|
audio domain clocks")
|
|
|
|
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
|
|
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
(cherry picked from commit 959ca92a3235fc4b17c1e18483fc390b3d612254)
|
|
---
|
|
drivers/clk/bcm/clk-bcm2835.c | 45 +++++++++++++++++++++++++++++++++++++------
|
|
1 file changed, 39 insertions(+), 6 deletions(-)
|
|
|
|
--- a/drivers/clk/bcm/clk-bcm2835.c
|
|
+++ b/drivers/clk/bcm/clk-bcm2835.c
|
|
@@ -51,6 +51,7 @@
|
|
#define CM_GNRICCTL 0x000
|
|
#define CM_GNRICDIV 0x004
|
|
# define CM_DIV_FRAC_BITS 12
|
|
+# define CM_DIV_FRAC_MASK GENMASK(CM_DIV_FRAC_BITS - 1, 0)
|
|
|
|
#define CM_VPUCTL 0x008
|
|
#define CM_VPUDIV 0x00c
|
|
@@ -128,6 +129,7 @@
|
|
# define CM_GATE BIT(CM_GATE_BIT)
|
|
# define CM_BUSY BIT(7)
|
|
# define CM_BUSYD BIT(8)
|
|
+# define CM_FRAC BIT(9)
|
|
# define CM_SRC_SHIFT 0
|
|
# define CM_SRC_BITS 4
|
|
# define CM_SRC_MASK 0xf
|
|
@@ -647,6 +649,7 @@ struct bcm2835_clock_data {
|
|
u32 frac_bits;
|
|
|
|
bool is_vpu_clock;
|
|
+ bool is_mash_clock;
|
|
};
|
|
|
|
static const char *const bcm2835_clock_per_parents[] = {
|
|
@@ -828,6 +831,7 @@ static const struct bcm2835_clock_data b
|
|
.div_reg = CM_PWMDIV,
|
|
.int_bits = 12,
|
|
.frac_bits = 12,
|
|
+ .is_mash_clock = true,
|
|
};
|
|
|
|
struct bcm2835_pll {
|
|
@@ -1196,7 +1200,7 @@ static u32 bcm2835_clock_choose_div(stru
|
|
GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0) >> 1;
|
|
u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
|
|
u64 rem;
|
|
- u32 div;
|
|
+ u32 div, mindiv, maxdiv;
|
|
|
|
rem = do_div(temp, rate);
|
|
div = temp;
|
|
@@ -1206,11 +1210,23 @@ static u32 bcm2835_clock_choose_div(stru
|
|
div += unused_frac_mask + 1;
|
|
div &= ~unused_frac_mask;
|
|
|
|
- /* clamp to min divider of 1 */
|
|
- div = max_t(u32, div, 1 << CM_DIV_FRAC_BITS);
|
|
- /* clamp to the highest possible fractional divider */
|
|
- div = min_t(u32, div, GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
|
|
- CM_DIV_FRAC_BITS - data->frac_bits));
|
|
+ /* different clamping limits apply for a mash clock */
|
|
+ if (data->is_mash_clock) {
|
|
+ /* clamp to min divider of 2 */
|
|
+ mindiv = 2 << CM_DIV_FRAC_BITS;
|
|
+ /* clamp to the highest possible integer divider */
|
|
+ maxdiv = (BIT(data->int_bits) - 1) << CM_DIV_FRAC_BITS;
|
|
+ } else {
|
|
+ /* clamp to min divider of 1 */
|
|
+ mindiv = 1 << CM_DIV_FRAC_BITS;
|
|
+ /* clamp to the highest possible fractional divider */
|
|
+ maxdiv = GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
|
|
+ CM_DIV_FRAC_BITS - data->frac_bits);
|
|
+ }
|
|
+
|
|
+ /* apply the clamping limits */
|
|
+ div = max_t(u32, div, mindiv);
|
|
+ div = min_t(u32, div, maxdiv);
|
|
|
|
return div;
|
|
}
|
|
@@ -1304,9 +1320,26 @@ static int bcm2835_clock_set_rate(struct
|
|
struct bcm2835_cprman *cprman = clock->cprman;
|
|
const struct bcm2835_clock_data *data = clock->data;
|
|
u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate, false);
|
|
+ u32 ctl;
|
|
+
|
|
+ spin_lock(&cprman->regs_lock);
|
|
+
|
|
+ /*
|
|
+ * Setting up frac support
|
|
+ *
|
|
+ * In principle it is recommended to stop/start the clock first,
|
|
+ * but as we set CLK_SET_RATE_GATE during registration of the
|
|
+ * clock this requirement should be take care of by the
|
|
+ * clk-framework.
|
|
+ */
|
|
+ ctl = cprman_read(cprman, data->ctl_reg) & ~CM_FRAC;
|
|
+ ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0;
|
|
+ cprman_write(cprman, data->ctl_reg, ctl);
|
|
|
|
cprman_write(cprman, data->div_reg, div);
|
|
|
|
+ spin_unlock(&cprman->regs_lock);
|
|
+
|
|
return 0;
|
|
}
|
|
|