322a02f666
Add initial support for Marvell Armada cortex-a53 based
DB-88F3720-DDR3-Modular development board.
Specifications:
- Dual core ARMv8 Cortex-A53 CPU (up to 1.0 GHz)
- 4Gb 16-bit DDR3/3L DRAM memory
- 128Mb SPI NOR flash memory
- 8Gb eMMC NAND flash memory
- 1 x SATA Rev 3.0 port
- 1 x PCI Express (PCIe) Gen 2.0 or 1 x mini PCI Express (PCIe) Gen 2.0
- 1 x 1G Ethernet port via RGMII (RJ45)
- 1 x SD card port
- 1 x USB3 (USB2 backward) host\device port via type C connector
- 1 x USB2 host port via type A connector
- 1 x serial COM port driven by the 88F3720 UART interface and converted to
USB via FTDI IC (option to connect the UART DB9 adapter)
- I2C Master Interface:
- 1 x EEPROM @ address 0x57
- 1 x I/O Expanders @ address 0x22
- Sample at Reset (SatR) memory device @ address 0x4C
- RTC clock generator PT7C4337AWE @ address 0x68
- USB3 switch PI5USB30213XEA @ address 0x0D
- ID component of PHY module @ address 0x24
- 1 x JTAG interface for CPU emulator
- 1 x SETM and JTAG debug interface
- 1 x power connector for HDD supply
- 1 x 12V DC jack power connector
- Board dimensions: 150 mm x 179 mm
- LED interface for system status
Booting from SD card:
1. reset U-Boot environment:
env default -a
saveenv
2. prepare U-Boot with boot script:
setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
saveenv
or manually:
setenv fdt_name armada-3720-db.dtb
setenv image_name Image
setenv bootcmd 'mmc dev 0; ext4load mmc 0:1 $kernel_addr $image_name;ext4load mmc 0:1 $fdt_addr $fdt_name;setenv bootargs $console root=/dev/mmcblk1p2 rw rootwait; booti $kernel_addr - $fdt_addr'
saveenv
Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr>
62 lines
1.4 KiB
Bash
Executable file
62 lines
1.4 KiB
Bash
Executable file
#!/bin/sh
|
|
#
|
|
# Copyright (C) 2014-2016 OpenWrt.org
|
|
# Copyright (C) 2016 LEDE-Project.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
board_config_update
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
armada-385-db-ap)
|
|
ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"
|
|
;;
|
|
armada-385-linksys-caiman|\
|
|
armada-385-linksys-cobra|\
|
|
armada-385-linksys-rango|\
|
|
armada-385-linksys-shelby|\
|
|
armada-385-linksys-venom|\
|
|
armada-xp-linksys-mamba)
|
|
ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" "4:wan" "6@eth1"
|
|
;;
|
|
armada-385-turris-omnia)
|
|
ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4"
|
|
ucidef_set_interface_wan "eth2"
|
|
;;
|
|
armada-388-clearfog-*)
|
|
# eth0 is standalone ethernet
|
|
# eth1 is switch (-pro) or standalone ethernet (-base)
|
|
# eth2 is SFP
|
|
ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2"
|
|
|
|
# if switch exists (clearfog-pro)
|
|
# switch port 5 is connected to eth1
|
|
swconfig list 2>&1 | grep -q switch0 && \
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6"
|
|
;;
|
|
armada-xp-gp)
|
|
ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
|
|
;;
|
|
globalscale,espressobin)
|
|
ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
|
|
;;
|
|
marvell,armada-3720-db)
|
|
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
|
;;
|
|
marvell,armada8040-mcbin)
|
|
ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2"
|
|
;;
|
|
*)
|
|
ucidef_set_interface_lan "eth0"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|