openwrtv3/target/linux/imx6/patches-3.13/0005-PCI-designware-Fix-I-O-transfers-by-using-CPU-not-re.patch
Luka Perkov 3203599a7d imx6: add initial 3.13 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39573
2014-02-12 00:46:00 +00:00

67 lines
2.5 KiB
Diff

From fce8591f73c6a30c231f220d1092362aae0b985c Mon Sep 17 00:00:00 2001
From: Pratyush Anand <pratyush.anand@st.com>
Date: Wed, 11 Dec 2013 15:08:33 +0530
Subject: [PATCH] PCI: designware: Fix I/O transfers by using CPU (not realio)
address
pp->io_base, which is the input of the outbound IO address translation
unit, should be the CPU address. It was incorrectly programmed to the
realio address.
We should pass global_io_offset rather than sys->io_offset to
pci_ioremap_io(), so we map the new window into the first available spot in
the Linux view of the I/O space.
We must also pass CPU address instead of realio address to pci_ioremap_io().
This patch fixes above issue. It has been tested with Lecroy PTC in AIC
mode and Pericom PI7C9X2G303EL PCIe switch, which does not work otherwise.
Tested-by: Mohit Kumar <mohit.kumar@st.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marek Vasut <marex@denx.de
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Zhu <Hong-Xing.Zhu@freescale.com>
---
drivers/pci/host/pcie-designware.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -394,6 +394,7 @@ int __init dw_pcie_host_init(struct pcie
+ global_io_offset);
pp->config.io_size = resource_size(&pp->io);
pp->config.io_bus_addr = range.pci_addr;
+ pp->io_base = range.cpu_addr;
}
if (restype == IORESOURCE_MEM) {
of_pci_range_to_resource(&range, np, &pp->mem);
@@ -419,7 +420,6 @@ int __init dw_pcie_host_init(struct pcie
pp->cfg0_base = pp->cfg.start;
pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
- pp->io_base = pp->io.start;
pp->mem_base = pp->mem.start;
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
@@ -585,7 +585,6 @@ static int dw_pcie_wr_other_conf(struct
return ret;
}
-
static int dw_pcie_valid_config(struct pcie_port *pp,
struct pci_bus *bus, int dev)
{
@@ -679,7 +678,7 @@ static int dw_pcie_setup(int nr, struct
if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
sys->io_offset = global_io_offset - pp->config.io_bus_addr;
- pci_ioremap_io(sys->io_offset, pp->io.start);
+ pci_ioremap_io(global_io_offset, pp->io_base);
global_io_offset += SZ_64K;
pci_add_resource_offset(&sys->resources, &pp->io,
sys->io_offset);