openwrtv3/target/linux/ramips/dts/WNCE2001.dts
Felix Fietkau 32877b31dc ramips: update DTS files to use jedec,spi-nor compatible string for m25p80 to fix probe issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47935
2015-12-18 22:26:40 +00:00

139 lines
2.1 KiB
Text

/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "WNCE2001", "ralink,rt3052-soc";
model = "Netgear WNCE2001";
chosen {
bootargs = "console=ttyS0,115200";
};
palmbus@10000000 {
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l3205d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
factory: partition@30000 {
label = "factory";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "config";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "language";
reg = <0x60000 0x30000>;
read-only;
};
partition@90000 {
label = "pot";
reg = <0x90000 0x10000>;
read-only;
};
partition@a0000 {
label = "checksum";
reg = <0xa0000 0x10000>;
};
partition@b0000 {
label = "firmware";
reg = <0xb0000 0x350000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x28>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
gpio-leds {
compatible = "gpio-leds";
power-green {
label = "wnce2001:green:power";
gpios = <&gpio0 8 1>;
};
power-red {
label = "wnce2001:red:power";
gpios = <&gpio0 9 1>;
};
wlan-green {
label = "wnce2001:green:wlan";
gpios = <&gpio0 12 0>;
};
wlan-red {
label = "wnce2001:red:wlan";
gpios = <&gpio0 13 0>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
rt {
label = "rt";
gpios = <&gpio0 11 1>;
linux,code = <0x100>;
};
ap {
label = "ap";
gpios = <&gpio0 7 1>;
linux,code = <0x101>;
};
};
};