285 lines
7.2 KiB
Diff
285 lines
7.2 KiB
Diff
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
|
|
index 9c735c6..a32d772 100644
|
|
--- a/arch/arm/dts/Makefile
|
|
+++ b/arch/arm/dts/Makefile
|
|
@@ -103,6 +103,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
|
|
sun7i-a20-ainol-aw1.dtb \
|
|
sun7i-a20-bananapi.dtb \
|
|
sun7i-a20-bananapro.dtb \
|
|
+ sun7i-a20-lamobo-r1.dtb \
|
|
sun7i-a20-cubieboard2.dtb \
|
|
sun7i-a20-cubietruck.dtb \
|
|
sun7i-a20-hummingbird.dtb \
|
|
diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
|
|
b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
|
|
new file mode 100644
|
|
index 0000000..a77fb5c
|
|
--- /dev/null
|
|
+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
|
|
@@ -0,0 +1,231 @@
|
|
+/*
|
|
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
|
|
+ *
|
|
+ * Hans de Goede <hdegoede@redhat.com>
|
|
+ *
|
|
+ * This file is dual-licensed: you can use it either under the terms
|
|
+ * of the GPL or the X11 license, at your option. Note that this dual
|
|
+ * licensing only applies to this file, and not this project as a
|
|
+ * whole.
|
|
+ *
|
|
+ * a) This file is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License as
|
|
+ * published by the Free Software Foundation; either version 2 of the
|
|
+ * License, or (at your option) any later version.
|
|
+ *
|
|
+ * This file is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * Or, alternatively,
|
|
+ *
|
|
+ * b) Permission is hereby granted, free of charge, to any person
|
|
+ * obtaining a copy of this software and associated documentation
|
|
+ * files (the "Software"), to deal in the Software without
|
|
+ * restriction, including without limitation the rights to use,
|
|
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
|
+ * sell copies of the Software, and to permit persons to whom the
|
|
+ * Software is furnished to do so, subject to the following
|
|
+ * conditions:
|
|
+ *
|
|
+ * The above copyright notice and this permission notice shall be
|
|
+ * included in all copies or substantial portions of the Software.
|
|
+ *
|
|
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
+ * OTHER DEALINGS IN THE SOFTWARE.
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+#include "sun7i-a20.dtsi"
|
|
+#include "sunxi-common-regulators.dtsi"
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/interrupt-controller/irq.h>
|
|
+#include <dt-bindings/pinctrl/sun4i-a10.h>
|
|
+
|
|
+/ {
|
|
+ model = "Lamobo Banana Pi R1";
|
|
+ compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
|
|
+
|
|
+ aliases {
|
|
+ serial0 = &uart0;
|
|
+ serial1 = &uart3;
|
|
+ serial2 = &uart7;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&led_pins_bananapi>;
|
|
+
|
|
+ green {
|
|
+ label = "bananapi:green:usr";
|
|
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ reg_gmac_3v3: gmac-3v3 {
|
|
+ compatible = "regulator-fixed";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&gmac_power_pin_bananapi>;
|
|
+ regulator-name = "gmac-3v3";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ startup-delay-us = <100000>;
|
|
+ enable-active-high;
|
|
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&ahci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ehci0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ehci1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&gmac {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
|
|
+ phy = <&phy1>;
|
|
+ phy-mode = "rgmii";
|
|
+ phy-supply = <®_gmac_3v3>;
|
|
+ status = "okay";
|
|
+
|
|
+ phy1: ethernet-phy@1 {
|
|
+ reg = <1>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c0_pins_a>;
|
|
+ status = "okay";
|
|
+
|
|
+ axp209: pmic@34 {
|
|
+ compatible = "x-powers,axp209";
|
|
+ reg = <0x34>;
|
|
+ interrupt-parent = <&nmi_intc>;
|
|
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
+
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <1>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c2 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c2_pins_a>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ir0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&ir0_rx_pins_a>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&mmc0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
|
|
+ vmmc-supply = <®_vcc3v3>;
|
|
+ bus-width = <4>;
|
|
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
|
|
+ cd-inverted;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ohci0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ohci1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pio {
|
|
+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
|
|
+ allwinner,pins = "PH10";
|
|
+ allwinner,function = "gpio_in";
|
|
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
|
+ };
|
|
+
|
|
+ gmac_power_pin_bananapi: gmac_power_pin@0 {
|
|
+ allwinner,pins = "PH23";
|
|
+ allwinner,function = "gpio_out";
|
|
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
|
+ };
|
|
+
|
|
+ led_pins_bananapi: led_pins@0 {
|
|
+ allwinner,pins = "PH24";
|
|
+ allwinner,function = "gpio_out";
|
|
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
|
+ };
|
|
+
|
|
+ ir0_tx_pins_a: ir0@1 {
|
|
+ allwinner,pins = "PB3";
|
|
+ allwinner,function = "ir0";
|
|
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
|
+ };
|
|
+
|
|
+};
|
|
+
|
|
+®_usb1_vbus {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+®_usb2_vbus {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&spi0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&spi0_pins_a>,
|
|
+ <&spi0_cs0_pins_a>,
|
|
+ <&spi0_cs1_pins_a>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart0_pins_a>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart3 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart3_pins_b>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart7 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart7_pins_a>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbphy {
|
|
+ usb1_vbus-supply = <®_usb1_vbus>;
|
|
+ usb2_vbus-supply = <®_usb2_vbus>;
|
|
+ status = "okay";
|
|
+};
|
|
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
|
|
index 7a42055..abf2c1c 100644
|
|
--- a/board/sunxi/MAINTAINERS
|
|
+++ b/board/sunxi/MAINTAINERS
|
|
@@ -30,6 +30,7 @@ F: include/configs/sun7i.h
|
|
F: configs/A20-OLinuXino_MICRO_defconfig
|
|
F: configs/Bananapi_defconfig
|
|
F: configs/Bananapro_defconfig
|
|
+F: configs/Lamobo_R1_defconfig
|
|
F: configs/i12-tvbox_defconfig
|
|
F: configs/Linksprite_pcDuino3_defconfig
|
|
F: configs/Linksprite_pcDuino3_fdt_defconfig
|
|
diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
|
|
new file mode 100644
|
|
index 0000000..bf665e7
|
|
--- /dev/null
|
|
+++ b/configs/Lamobo_R1_defconfig
|
|
@@ -0,0 +1,17 @@
|
|
+CONFIG_ARM=y
|
|
+CONFIG_ARCH_SUNXI=y
|
|
+CONFIG_MACH_SUN7I=y
|
|
+CONFIG_DRAM_CLK=432
|
|
+CONFIG_GMAC_TX_DELAY=4
|
|
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
|
|
+CONFIG_SPL=y
|
|
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
|
|
+CONFIG_ETH_DESIGNWARE=y
|
|
+# CONFIG_CMD_IMLS is not set
|
|
+# CONFIG_CMD_FLASH is not set
|
|
+# CONFIG_CMD_FPGA is not set
|
|
+CONFIG_DM_SERIAL=y
|
|
+CONFIG_USB=y
|
|
+CONFIG_DM_USB=y
|
|
+CONFIG_NETDEVICES=y
|
|
+CONFIG_NET=y
|