openwrtv3/target/linux/ramips/dts/Y1S.dts
L. D. Pinney 70b192f573 ramips: update device tree source files
Use the GPIO dt-bindings macros and add compatible strings in the
ramips device tree source files.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-08-03 19:37:40 +02:00

106 lines
1.8 KiB
Text

/dts-v1/;
#include "Y1.dtsi"
/ {
compatible = "lenovo,y1s", "lenovo,y1", "ralink,mt7620a-soc";
model = "Lenovo Y1S";
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
/* GPIO 54、55、56 USB1、2、3 */
usb0 {
gpio-export,name = "usb0";
gpio-export,output = <1>; // GPIOF_OUT_INIT_HIGH
gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; // GPIO2:40+14=GPIO 54
};
usb1 {
gpio-export,name = "usb1";
gpio-export,output = <1>;
gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
};
usb2 {
gpio-export,name = "usb2";
gpio-export,output = <1>;
gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
};
};
gpio-leds {
compatible = "gpio-leds";
power1 {
label = "y1s:yellow:power";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
power2 {
label = "y1s:blue:power";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wlan1 {
label = "y1s:yellow:wifi";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
wlan2 {
label = "y1s:blue:wifi";
gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
};
usb1 {
label = "y1s:yellow:usb";
gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
};
usb2 {
label = "y1s:blue:usb";
gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
};
internet {
label = "y1s:blue:internet";
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
};
};
};
&ethernet {
status = "okay";
mtd-mac-address = <&factory 0x4>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
mediatek,portmap = "wllll";
port@4 {
status = "okay";
phy-handle = <&phy4>;
phy-mode = "rgmii";
};
port@5 {
status = "okay";
phy-handle = <&phy5>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii";
};
};
};
&gsw {
mediatek,port4 = "gmac";
};