openwrtv3/target/linux/ramips/dts/WCR-1166DS.dts
Felix Fietkau dabdd123c9 mt76: update to the latest version
Uses upstream code to parse DT supported band/frequency information.
Update existing .dts files to the new format and remove unnecessary
overrides.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-01 17:49:55 +01:00

172 lines
2.8 KiB
Text

/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
model = "Buffalo WCR-1166DS";
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
aoss {
label = "aoss";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
ap {
label = "ap";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
reset {
label = "reset";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
router_o {
label = "wcr-1166ds:orange:router";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
router_g {
label = "wcr-1166ds:green:router";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
internet_o {
label = "wcr-1166ds:orange:internet";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
internet_g {
label = "wcr-1166ds:green:internet";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
};
wireless_o {
label = "wcr-1166ds:orange:wireless";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
wireless_g {
label = "wcr-1166ds:green:wireless";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
diag {
label = "wcr-1166ds:orange:diag";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
power {
label = "wcr-1166ds:green:power";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
};
};
&ehci {
status = "disabled";
};
&esw {
mediatek,portmap = <0x2f>;
mediatek,portdisable = <0x27>;
};
&ohci {
status = "disabled";
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s";
ralink,function = "gpio";
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7c0000>;
};
partition@810000 {
label = "firmware2";
reg = <0x810000 0x7c0000>;
};
partition@fd0000 {
label = "glbcfg";
reg = <0xfd0000 0x10000>;
read-only;
};
partition@fe0000 {
label = "board_data";
reg = <0xfe0000 0x10000>;
read-only;
};
};
};
&wmac {
status = "okay";
};