KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/mediatek/patches/0023-thermal-Add-Mediatek-thermal-controller-support.patch
John Crispin 25afe99b31 mediatek: add support for the new MT7623 Arm SoC 
the support is still WIP. next steps are to make the pmic and ethernet work.
this is the first commit to make sure nothing gets lost.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47354
2015-11-02 10:18:50 +00:00

785 lines
21 KiB
Diff
Raw Blame History

From 014330a304100782a26bc7df02778c8c386b2857 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 13 May 2015 10:52:42 +0200
Subject: [PATCH 23/76] thermal: Add Mediatek thermal controller support
This adds support for the Mediatek thermal controller found on MT8173
and likely other SoCs.
The controller is a bit special. It does not have its own ADC, instead
it controls the on-SoC AUXADC via AHB bus accesses. For this reason
we need the physical address of the AUXADC. Also it controls a mux
using AHB bus accesses, so we need the APMIXEDSYS physical address aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/thermal/Kconfig | 8 +
drivers/thermal/Makefile | 1 +
drivers/thermal/mtk_thermal.c | 728 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 737 insertions(+)
create mode 100644 drivers/thermal/mtk_thermal.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index af40db0..3aa5500 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -285,6 +285,14 @@ config ACPI_THERMAL_REL
tristate
depends on ACPI
+config MTK_THERMAL
+ tristate "Temperature sensor driver for mediatek SoCs"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ default y
+ help
+ Enable this option if you want to have support for thermal management
+ controller present in Mediatek SoCs
+
menu "Texas Instruments thermal drivers"
source "drivers/thermal/ti-soc-thermal/Kconfig"
endmenu
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index fa0dc48..51cfab7 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -39,3 +39,4 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
obj-$(CONFIG_ST_THERMAL) += st/
obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o
+obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
new file mode 100644
index 0000000..27aab12
--- /dev/null
+++ b/drivers/thermal/mtk_thermal.c
@@ -0,0 +1,728 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Hanyi.Wu <hanyi.wu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/interrupt.h>
+#include <linux/reset.h>
+
+/* AUXADC Registers */
+#define AUXADC_CON0_V 0x000
+#define AUXADC_CON1_V 0x004
+#define AUXADC_CON1_SET_V 0x008
+#define AUXADC_CON1_CLR_V 0x00c
+#define AUXADC_CON2_V 0x010
+#define AUXADC_DATA(channel) (0x14 + (channel) * 4)
+#define AUXADC_MISC_V 0x094
+
+#define AUXADC_CON1_CHANNEL(x) (1 << (x))
+
+/* Thermal Controller Registers */
+#define TEMPMONCTL0 0x000
+#define TEMPMONCTL1 0x004
+#define TEMPMONCTL2 0x008
+#define TEMPMONINT 0x00c
+#define TEMPMONINTSTS 0x010
+#define TEMPMONIDET0 0x014
+#define TEMPMONIDET1 0x018
+#define TEMPMONIDET2 0x01c
+#define TEMPH2NTHRE 0x024
+#define TEMPHTHRE 0x028
+#define TEMPCTHRE 0x02c
+#define TEMPOFFSETH 0x030
+#define TEMPOFFSETL 0x034
+#define TEMPMSRCTL0 0x038
+#define TEMPMSRCTL1 0x03c
+#define TEMPAHBPOLL 0x040
+#define TEMPAHBTO 0x044
+#define TEMPADCPNP0 0x048
+#define TEMPADCPNP1 0x04c
+#define TEMPADCPNP2 0x050
+#define TEMPADCPNP3 0x0b4
+
+#define TEMPADCMUX 0x054
+#define TEMPADCEXT 0x058
+#define TEMPADCEXT1 0x05c
+#define TEMPADCEN 0x060
+#define TEMPPNPMUXADDR 0x064
+#define TEMPADCMUXADDR 0x068
+#define TEMPADCEXTADDR 0x06c
+#define TEMPADCEXT1ADDR 0x070
+#define TEMPADCENADDR 0x074
+#define TEMPADCVALIDADDR 0x078
+#define TEMPADCVOLTADDR 0x07c
+#define TEMPRDCTRL 0x080
+#define TEMPADCVALIDMASK 0x084
+#define TEMPADCVOLTAGESHIFT 0x088
+#define TEMPADCWRITECTRL 0x08c
+#define TEMPMSR0 0x090
+#define TEMPMSR1 0x094
+#define TEMPMSR2 0x098
+#define TEMPMSR3 0x0B8
+
+#define TEMPIMMD0 0x0a0
+#define TEMPIMMD1 0x0a4
+#define TEMPIMMD2 0x0a8
+
+#define TEMPPROTCTL 0x0c0
+#define TEMPPROTTA 0x0c4
+#define TEMPPROTTB 0x0c8
+#define TEMPPROTTC 0x0cc
+
+#define TEMPSPARE0 0x0f0
+#define TEMPSPARE1 0x0f4
+#define TEMPSPARE2 0x0f8
+#define TEMPSPARE3 0x0fc
+
+#define PTPCORESEL 0x400
+#define THERMINTST 0x404
+#define PTPODINTST 0x408
+#define THSTAGE0ST 0x40c
+#define THSTAGE1ST 0x410
+#define THSTAGE2ST 0x414
+#define THAHBST0 0x418
+#define THAHBST1 0x41c /* Only for DE debug */
+#define PTPSPARE0 0x420
+#define PTPSPARE1 0x424
+#define PTPSPARE2 0x428
+#define PTPSPARE3 0x42c
+#define THSLPEVEB 0x430
+
+#define TEMPMONINT_COLD(sp) ((1 << 0) << ((sp) * 5))
+#define TEMPMONINT_HOT(sp) ((1 << 1) << ((sp) * 5))
+#define TEMPMONINT_LOW_OFS(sp) ((1 << 2) << ((sp) * 5))
+#define TEMPMONINT_HIGH_OFS(sp) ((1 << 3) << ((sp) * 5))
+#define TEMPMONINT_HOT_TO_NORM(sp) ((1 << 4) << ((sp) * 5))
+#define TEMPMONINT_TIMEOUT (1 << 15)
+#define TEMPMONINT_IMMEDIATE_SENSE(sp) (1 << (16 + (sp)))
+#define TEMPMONINT_FILTER_SENSE(sp) (1 << (19 + (sp)))
+
+#define TEMPADCWRITECTRL_ADC_PNP_WRITE (1 << 0)
+#define TEMPADCWRITECTRL_ADC_MUX_WRITE (1 << 1)
+#define TEMPADCWRITECTRL_ADC_EXTRA_WRITE (1 << 2)
+#define TEMPADCWRITECTRL_ADC_EXTRA1_WRITE (1 << 3)
+
+#define TEMPADCVALIDMASK_VALID_HIGH (1 << 5)
+#define TEMPADCVALIDMASK_VALID_POS(bit) (bit)
+
+#define TEMPPROTCTL_AVERAGE (0 << 16)
+#define TEMPPROTCTL_MAXIMUM (1 << 16)
+#define TEMPPROTCTL_SELECTED (2 << 16)
+
+#define MT8173_THERMAL_ZONE_CA57 0
+#define MT8173_THERMAL_ZONE_CA53 1
+#define MT8173_THERMAL_ZONE_GPU 2
+#define MT8173_THERMAL_ZONE_CORE 3
+
+#define MT8173_TS1 0
+#define MT8173_TS2 1
+#define MT8173_TS3 2
+#define MT8173_TS4 3
+#define MT8173_TSABB 4
+
+/* AUXADC channel 11 is used for the temperature sensors */
+#define MT8173_TEMP_AUXADC_CHANNEL 11
+
+/* The total number of temperature sensors in the MT8173 */
+#define MT8173_NUM_SENSORS 5
+
+/* The number of banks in the MT8173 */
+#define MT8173_NUM_BANKS 4
+
+/* The number of sensing points per bank */
+#define MT8173_NUM_SENSING_POINTS 4
+
+#define THERMAL_NAME "mtk-thermal"
+
+struct mtk_thermal;
+
+struct mtk_thermal_bank {
+ struct mtk_thermal *mt;
+ struct thermal_zone_device *tz;
+ int id;
+};
+
+struct mtk_thermal {
+ struct device *dev;
+ void __iomem *thermal_base;
+ void __iomem *auxadc_base;
+
+ u64 auxadc_phys_base;
+ u64 apmixed_phys_base;
+ struct reset_control *reset;
+ struct clk *clk_peri_therm;
+ struct clk *clk_auxadc;
+
+ struct mtk_thermal_bank banks[MT8173_NUM_BANKS];
+
+ struct mutex lock;
+
+ /* Calibration values */
+ s32 adc_ge;
+ s32 adc_oe;
+ s32 degc_cali;
+ s32 o_slope;
+ s32 vts;
+};
+
+struct mtk_thermal_bank_cfg {
+ unsigned int enable_mask;
+ unsigned int sensors[4];
+};
+
+static int sensor_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
+
+/*
+ * The MT8173 thermal controller has four banks. Each bank can read up to
+ * four temperature sensors simultaneously. The MT8173 has a total of 5
+ * temperature sensors. We use each bank to measure a certain area of the
+ * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple
+ * areas, hence is used in different banks.
+ */
+static struct mtk_thermal_bank_cfg bank_data[] = {
+ {
+ .enable_mask = 3,
+ .sensors = { MT8173_TS2, MT8173_TS3 },
+ }, {
+ .enable_mask = 3,
+ .sensors = { MT8173_TS2, MT8173_TS4 },
+ }, {
+ .enable_mask = 7,
+ .sensors = { MT8173_TS1, MT8173_TS2, MT8173_TSABB },
+ }, {
+ .enable_mask = 1,
+ .sensors = { MT8173_TS2 },
+ },
+};
+
+static int tempmsr_ofs[MT8173_NUM_SENSING_POINTS] = {
+ TEMPMSR0, TEMPMSR1, TEMPMSR2, TEMPMSR3
+};
+
+static int tempadcpnp_ofs[MT8173_NUM_SENSING_POINTS] = {
+ TEMPADCPNP0, TEMPADCPNP1, TEMPADCPNP2, TEMPADCPNP3
+};
+
+/**
+ * raw_to_mcelsius - convert a raw ADC value to mcelsius
+ * @mt: The thermal controller
+ * @raw: raw ADC value
+ *
+ * This converts the raw ADC value to mcelsius using the SoC specific
+ * calibration constants
+ */
+static int raw_to_mcelsius(struct mtk_thermal *mt, u32 raw)
+{
+ s32 format_1, format_2, format_3, format_4;
+ s32 xtoomt;
+ s32 gain;
+
+ raw &= 0xfff;
+
+ gain = (10000 + mt->adc_ge);
+
+ xtoomt = ((((mt->vts + 3350 - mt->adc_oe) * 10000) / 4096) * 10000) /
+ gain;
+
+ format_1 = ((mt->degc_cali * 10) >> 1);
+ format_2 = (raw - mt->adc_oe);
+ format_3 = (((((format_2) * 10000) >> 12) * 10000) / gain) - xtoomt;
+ format_3 = format_3 * 15 / 18;
+ format_4 = ((format_3 * 100) / (165 + mt->o_slope));
+ format_4 = format_4 - (format_4 << 1);
+
+ return (format_1 + format_4) * 100;
+}
+
+/**
+ * mcelsius_to_raw - convert mcelsius to raw ADC value
+ * @mt: The thermal controller
+ * @temp: The temperature in mcelsius
+ *
+ * This converts a temperature in mcelsius to a raw ADC value, needed to
+ * calculate the trigger values for interrupt generation.
+ */
+static u32 mcelsius_to_raw(struct mtk_thermal *mt, int temp)
+{
+ s32 format_1, format_2, format_3, format_4;
+ s32 xtoomt;
+ s32 gain;
+
+ gain = (10000 + mt->adc_ge);
+
+ xtoomt = ((((mt->vts + 3350 - mt->adc_oe) * 10000) / 4096) * 10000) /
+ gain;
+
+ format_1 = temp - (mt->degc_cali * 1000 / 2);
+ format_2 = format_1 * (165 + mt->o_slope) * 18 / 15;
+ format_2 = format_2 - 2 * format_2;
+ format_3 = format_2 / 1000 + xtoomt * 10;
+ format_4 = (format_3 * 4096 / 10000 * gain) / 100000 + mt->adc_oe;
+
+ return format_4;
+}
+
+/**
+ * mtk_thermal_get_bank - get bank
+ * @bank: The bank
+ *
+ * The bank registers are banked, we have to select a bank in the
+ * PTPCORESEL register to access it.
+ */
+static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank)
+{
+ struct mtk_thermal *mt = bank->mt;
+ u32 val;
+
+ mutex_lock(&mt->lock);
+
+ val = readl(mt->thermal_base + PTPCORESEL);
+ val &= ~0xf;
+ val |= bank->id;
+ writel(val, mt->thermal_base + PTPCORESEL);
+}
+
+/**
+ * mtk_thermal_put_bank - release bank
+ * @bank: The bank
+ *
+ * release a bank previously taken with mtk_thermal_get_bank,
+ */
+static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
+{
+ struct mtk_thermal *mt = bank->mt;
+
+ mutex_unlock(&mt->lock);
+}
+
+/**
+ * mtk_thermal_bank_temperature - get the temperature of a bank
+ * @bank: The bank
+ *
+ * The temperature of a bank is considered the maximum temperature of
+ * the sensors associated to the bank.
+ */
+static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
+{
+ struct mtk_thermal *mt = bank->mt;
+ int temp, i, max;
+ u32 raw;
+
+ temp = max = -INT_MAX;
+
+ for (i = 0; i < 4; i++) {
+ int sensno;
+
+ if (!(bank_data[bank->id].enable_mask & (1 << i)))
+ continue;
+
+ raw = readl(mt->thermal_base + tempmsr_ofs[i]);
+
+ sensno = bank_data[bank->id].sensors[i];
+ temp = raw_to_mcelsius(mt, raw);
+
+ if (temp > max)
+ max = temp;
+ }
+
+ return max;
+}
+
+static void mtk_thermal_irq_bank(struct mtk_thermal_bank *bank)
+{
+ struct mtk_thermal *mt = bank->mt;
+ int sp;
+ u32 irqstat;
+ bool update = false;
+
+ mtk_thermal_get_bank(bank);
+
+ irqstat = readl(mt->thermal_base + TEMPMONINTSTS);
+
+ mtk_thermal_put_bank(bank);
+
+ for (sp = 0; sp < 3; sp++) {
+ if (irqstat & TEMPMONINT_LOW_OFS(sp)) {
+ update = true;
+ dev_vdbg(mt->dev, "bank %d sensor %d low offset interrupt\n",
+ bank->id, sp);
+ }
+
+ if (irqstat & TEMPMONINT_HIGH_OFS(sp)) {
+ update = true;
+ dev_vdbg(mt->dev, "bank %d sensor %d high offset interrupt\n",
+ bank->id, sp);
+ }
+ }
+
+ if (update)
+ thermal_zone_device_update(bank->tz);
+}
+
+static irqreturn_t mtk_thermal_irq(int irq, void *dev_id)
+{
+ struct mtk_thermal *mt = dev_id;
+ u32 irqstat = 0;
+ int i;
+
+ irqstat = readl(mt->thermal_base + THERMINTST);
+
+ dev_vdbg(mt->dev, "thermal_interrupt_handler : THERMINTST = 0x%x\n",
+ irqstat);
+
+ for (i = 0; i < MT8173_NUM_BANKS; i++) {
+ if (!(irqstat & (1 << i)))
+ mtk_thermal_irq_bank(&mt->banks[i]);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int mtk_read_temp(void *data, int *temp)
+{
+ struct mtk_thermal_bank *bank = data;
+
+ mtk_thermal_get_bank(bank);
+
+ *temp = mtk_thermal_bank_temperature(bank);
+
+ mtk_thermal_put_bank(bank);
+
+ return 0;
+}
+
+static int mtk_set_trips(void *data, int low, int high)
+{
+ struct mtk_thermal_bank *bank = data;
+ struct mtk_thermal *mt = bank->mt;
+ int i;
+ u32 val, enable_mask;
+ u32 raw_low, raw_high;
+
+ raw_low = mcelsius_to_raw(mt, low);
+ raw_high = mcelsius_to_raw(mt, high);
+
+ mtk_thermal_get_bank(bank);
+
+ writel(0x0, mt->thermal_base + TEMPMONINT);
+
+ writel(TEMPPROTCTL_SELECTED, mt->thermal_base + TEMPPROTCTL);
+
+ writel(raw_low, mt->thermal_base + TEMPOFFSETL);
+ writel(raw_high, mt->thermal_base + TEMPOFFSETH);
+
+ enable_mask = readl(mt->thermal_base + TEMPMONCTL0);
+
+ val = 0;
+ for (i = 0; i < MT8173_NUM_SENSING_POINTS; i++)
+ if (enable_mask & (1 << i))
+ val |= TEMPMONINT_LOW_OFS(i) | TEMPMONINT_HIGH_OFS(i);
+
+ writel(val, mt->thermal_base + TEMPMONINT);
+
+ mtk_thermal_put_bank(bank);
+
+ dev_dbg(mt->dev, "new boundaries: %d (0x%04x) < x < %d (0x%04x)\n",
+ low, mcelsius_to_raw(mt, low),
+ high, mcelsius_to_raw(mt, high));
+
+ return 0;
+}
+
+static const struct thermal_zone_of_device_ops mtk_thermal_ops = {
+ .get_temp = mtk_read_temp,
+ .set_trips = mtk_set_trips,
+};
+
+static void mtk_thermal_init_bank(struct mtk_thermal_bank *bank)
+{
+ struct mtk_thermal *mt = bank->mt;
+ struct mtk_thermal_bank_cfg *cfg = &bank_data[bank->id];
+ int i;
+
+ mtk_thermal_get_bank(bank);
+
+ /* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */
+ writel(0x0000000c, mt->thermal_base + TEMPMONCTL1);
+
+ /*
+ * filt interval is 1 * 46.540us = 46.54us,
+ * sen interval is 429 * 46.540us = 19.96ms
+ */
+ writel(0x000101ad, mt->thermal_base + TEMPMONCTL2);
+
+ /* poll is set to 10u */
+ writel(0x00000300, mt->thermal_base + TEMPAHBPOLL);
+
+ /* temperature sampling control, 1 sample */
+ writel(0x00000000, mt->thermal_base + TEMPMSRCTL0);
+
+ /* exceed this polling time, IRQ would be inserted */
+ writel(0xffffffff, mt->thermal_base + TEMPAHBTO);
+
+ /* number of interrupts per event, 1 is enough */
+ writel(0x0, mt->thermal_base + TEMPMONIDET0);
+ writel(0x0, mt->thermal_base + TEMPMONIDET1);
+
+ /*
+ * The MT8173 thermal controller does not have its own ADC. Instead it
+ * uses AHB bus accesses to control the AUXADC. To do this the thermal
+ * controller has to be programmed with the physical addresses of the
+ * AUXADC registers and with the various bit positions in the AUXADC.
+ * Also the thermal controller controls a mux in the APMIXEDSYS register
+ * space.
+ */
+
+ /*
+ * this value will be stored to TEMPPNPMUXADDR (TEMPSPARE0)
+ * automatically by hw
+ */
+ writel(1 << MT8173_TEMP_AUXADC_CHANNEL, mt->thermal_base + TEMPADCMUX);
+
+ /* AHB address for auxadc mux selection */
+ writel(mt->auxadc_phys_base + 0x00c,
+ mt->thermal_base + TEMPADCMUXADDR);
+
+ /* AHB address for pnp sensor mux selection */
+ writel(mt->apmixed_phys_base + 0x0604,
+ mt->thermal_base + TEMPPNPMUXADDR);
+
+ /* AHB value for auxadc enable */
+ writel(1 << MT8173_TEMP_AUXADC_CHANNEL, mt->thermal_base + TEMPADCEN);
+
+ /* AHB address for auxadc enable (channel 0 immediate mode selected) */
+ writel(mt->auxadc_phys_base + AUXADC_CON1_SET_V,
+ mt->thermal_base + TEMPADCENADDR);
+
+ /* AHB address for auxadc valid bit */
+ writel(mt->auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
+ mt->thermal_base + TEMPADCVALIDADDR);
+
+ /* AHB address for auxadc voltage output */
+ writel(mt->auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
+ mt->thermal_base + TEMPADCVOLTADDR);
+
+ /* read valid & voltage are at the same register */
+ writel(0x0, mt->thermal_base + TEMPRDCTRL);
+
+ /* indicate where the valid bit is */
+ writel(TEMPADCVALIDMASK_VALID_HIGH | TEMPADCVALIDMASK_VALID_POS(12),
+ mt->thermal_base + TEMPADCVALIDMASK);
+
+ /* no shift */
+ writel(0x0, mt->thermal_base + TEMPADCVOLTAGESHIFT);
+
+ /* enable auxadc mux write transaction */
+ writel(TEMPADCWRITECTRL_ADC_MUX_WRITE,
+ mt->thermal_base + TEMPADCWRITECTRL);
+
+ for (i = 0; i < MT8173_NUM_SENSING_POINTS; i++)
+ writel(sensor_mux_values[cfg->sensors[i]],
+ mt->thermal_base + tempadcpnp_ofs[i]);
+
+ writel(cfg->enable_mask, mt->thermal_base + TEMPMONCTL0);
+
+ writel(TEMPADCWRITECTRL_ADC_PNP_WRITE | TEMPADCWRITECTRL_ADC_MUX_WRITE,
+ mt->thermal_base + TEMPADCWRITECTRL);
+
+ mtk_thermal_put_bank(bank);
+}
+
+static u64 of_get_phys_base(struct device_node *np)
+{
+ u64 size64;
+ const __be32 *regaddr_p;
+
+ regaddr_p = of_get_address(np, 0, &size64, NULL);
+ if (!regaddr_p)
+ return OF_BAD_ADDR;
+
+ return of_translate_address(np, regaddr_p);
+}
+
+static int mtk_thermal_probe(struct platform_device *pdev)
+{
+ int ret, i;
+ struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
+ int irq;
+ struct mtk_thermal *mt;
+ struct resource *res;
+
+ mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
+ if (!mt)
+ return -ENOMEM;
+
+ mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
+ if (IS_ERR(mt->clk_peri_therm))
+ return PTR_ERR(mt->clk_peri_therm);
+
+ mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
+ if (IS_ERR(mt->clk_auxadc))
+ return PTR_ERR(mt->clk_auxadc);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mt->thermal_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mt->thermal_base))
+ return PTR_ERR(mt->thermal_base);
+
+ mt->reset = devm_reset_control_get(&pdev->dev, "therm");
+ if (IS_ERR(mt->reset)) {
+ ret = PTR_ERR(mt->reset);
+ dev_err(&pdev->dev, "cannot get reset: %d\n", ret);
+ return ret;
+ }
+
+ mutex_init(&mt->lock);
+
+ mt->dev = &pdev->dev;
+
+ auxadc = of_parse_phandle(np, "auxadc", 0);
+ if (!auxadc) {
+ dev_err(&pdev->dev, "missing auxadc node\n");
+ return -ENODEV;
+ }
+
+ mt->auxadc_phys_base = of_get_phys_base(auxadc);
+ if (mt->auxadc_phys_base == OF_BAD_ADDR) {
+ dev_err(&pdev->dev, "Can't get auxadc phys address\n");
+ return -EINVAL;
+ }
+
+ apmixedsys = of_parse_phandle(np, "apmixedsys", 0);
+ if (!apmixedsys) {
+ dev_err(&pdev->dev, "missing apmixedsys node\n");
+ return -ENODEV;
+ }
+
+ mt->apmixed_phys_base = of_get_phys_base(apmixedsys);
+ if (mt->apmixed_phys_base == OF_BAD_ADDR) {
+ dev_err(&pdev->dev, "Can't get auxadc phys address\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "Can't find irq\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, mtk_thermal_irq,
+ IRQF_ONESHOT, THERMAL_NAME, mt);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't request irq %d: %d\n", irq, ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(mt->clk_auxadc);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
+ return ret;
+ }
+
+ reset_control_reset(mt->reset);
+
+ ret = clk_prepare_enable(mt->clk_peri_therm);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
+ goto err_enable_clk;
+ }
+
+ /*
+ * These calibration values should finally be provided by the
+ * firmware or fuses. For now use default values.
+ */
+ mt->adc_ge = ((512 - 512) * 10000) / 4096;
+ mt->adc_oe = 512 - 512;
+ mt->degc_cali = 40;
+ mt->o_slope = 0;
+ mt->vts = 260;
+
+ for (i = 0; i < MT8173_NUM_BANKS; i++) {
+ struct mtk_thermal_bank *bank = &mt->banks[i];
+
+ bank->id = i;
+ bank->mt = mt;
+ mtk_thermal_init_bank(&mt->banks[i]);
+ }
+
+ platform_set_drvdata(pdev, mt);
+
+ /*
+ * This is needed after initialising the banks because otherwise
+ * the first temperature read contains bogus high temperatures which
+ * immediately cause a system shutdown.
+ */
+ msleep(100);
+
+ for (i = 0; i < MT8173_NUM_BANKS; i++) {
+ struct mtk_thermal_bank *bank = &mt->banks[i];
+
+ bank->tz = thermal_zone_of_sensor_register(&pdev->dev, i, bank,
+ &mtk_thermal_ops);
+ }
+
+ return 0;
+
+err_enable_clk:
+ clk_disable_unprepare(mt->clk_peri_therm);
+
+ return ret;
+}
+
+static int mtk_thermal_remove(struct platform_device *pdev)
+{
+ struct mtk_thermal *mt = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < MT8173_NUM_BANKS; i++) {
+ struct mtk_thermal_bank *bank = &mt->banks[i];
+
+ if (!IS_ERR(bank))
+ thermal_zone_of_sensor_unregister(&pdev->dev, bank->tz);
+ }
+
+ clk_disable_unprepare(mt->clk_peri_therm);
+ clk_disable_unprepare(mt->clk_auxadc);
+
+ return 0;
+}
+
+static const struct of_device_id mtk_thermal_of_match[] = {
+ {
+ .compatible = "mediatek,mt8173-thermal",
+ }, {
+ },
+};
+
+static struct platform_driver mtk_thermal_driver = {
+ .probe = mtk_thermal_probe,
+ .remove = mtk_thermal_remove,
+ .driver = {
+ .name = THERMAL_NAME,
+ .of_match_table = mtk_thermal_of_match,
+ },
+};
+
+module_platform_driver(mtk_thermal_driver);
--
1.7.10.4
Reference in a new issue View git blame Copy permalink