7f9f42d42e
ALFA Network AP91-5G is a 5 GHz outdoor AP/CPE board, based on Atheros AR7240 + AR9280. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 32 MB of RAM (DDR1) - 8 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet, with passive PoE support (24 V) - 1T1R 5 GHz (AR9280), with ext. PA (SE5004L) and LNA, up to 27 dBm - 6x LED (5 are driven by GPIO) - 1x button (reset) - external h/w watchdog (EM6324QYSP5B, disabled and not used) - header for optional 802.3at/af PoE module - DC jack for main power input (optional, not installed by default) - UART and LEDs headers on PCB Flash instruction: Use "factory" image in vendor GUI (in case of problems, make sure your board has up to date firmware). Alternatively, TFTP in U-Boot can be used: select option "2. Load system code then write to Flash via TFTP" during early boot and use "sysupgrade" image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
118 lines
3 KiB
C
118 lines
3 KiB
C
/*
|
|
* ALFA Network AP91-5G board support
|
|
*
|
|
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "machtypes.h"
|
|
|
|
#define AP91_5G_GPIO_LED_LAN 17
|
|
#define AP91_5G_GPIO_LED_SIGNAL1 12
|
|
#define AP91_5G_GPIO_LED_SIGNAL2 8
|
|
#define AP91_5G_GPIO_LED_SIGNAL3 6
|
|
#define AP91_5G_GPIO_LED_SIGNAL4 7
|
|
|
|
#define AP91_5G_GPIO_WDT_EN 1
|
|
#define AP91_5G_GPIO_WDT_IN 0
|
|
|
|
#define AP91_5G_GPIO_BTN_RESET 11
|
|
|
|
#define AP91_5G_KEYS_POLL_INTERVAL 20
|
|
#define AP91_5G_KEYS_DEBOUNCE_INTERVAL (3 * AP91_5G_KEYS_POLL_INTERVAL)
|
|
|
|
#define AP91_5G_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
static struct gpio_led ap91_5g_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "ap91-5g:green:lan",
|
|
.gpio = AP91_5G_GPIO_LED_LAN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "ap91-5g:red:signal1",
|
|
.gpio = AP91_5G_GPIO_LED_SIGNAL1,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "ap91-5g:orange:signal2",
|
|
.gpio = AP91_5G_GPIO_LED_SIGNAL2,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "ap91-5g:green:signal3",
|
|
.gpio = AP91_5G_GPIO_LED_SIGNAL3,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "ap91-5g:green:signal4",
|
|
.gpio = AP91_5G_GPIO_LED_SIGNAL4,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button ap91_5g_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = AP91_5G_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = AP91_5G_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static void __init ap91_5g_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
|
|
AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
|
|
|
|
gpio_set_value(AP91_5G_GPIO_LED_LAN, 1);
|
|
gpio_set_value(AP91_5G_GPIO_LED_SIGNAL3, 1);
|
|
gpio_set_value(AP91_5G_GPIO_LED_SIGNAL4, 1);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
/* LAN */
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(4);
|
|
ath79_eth0_data.speed = SPEED_100;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap91_5g_leds_gpio),
|
|
ap91_5g_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, AP91_5G_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(ap91_5g_gpio_keys),
|
|
ap91_5g_gpio_keys);
|
|
|
|
gpio_request_one(AP91_5G_GPIO_WDT_IN,
|
|
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
|
|
"WDT input");
|
|
|
|
gpio_request_one(AP91_5G_GPIO_WDT_EN,
|
|
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
|
|
"WDT enable");
|
|
|
|
ap91_pci_init(art + AP91_5G_WMAC_CALDATA_OFFSET, NULL);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_AP91_5G, "AP91-5G", "ALFA Network AP91-5G",
|
|
ap91_5g_setup);
|