8c64824576
GainStrong Oolite V5.2 is a small (39.5 x 78 mm), dual-band system on module, based on Qualcomm QCA9531 + QCA9887. All QCA9531 SOC GPIOs are available on castellated pins. Specification: - 650/400/200 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet (all ports available on castellated pins) - 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA - 1T1R 5 GHz (QCA9887) with ext. FEM (SKY85710-11) - 3x U.FL - 1x USB 2.0 The dedicated development board includes 5 FE ports, USB 2.0 port, two buttons (one directly connected to SOC reset input), header with all GPIOs and several LEDs. Flash instruction: Vendor firmware is based on OpenWrt. LuCI or sysupgrade can be used to flash OpenWrt firmware. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
1274 lines
40 KiB
Makefile
1274 lines
40 KiB
Makefile
DEVICE_VARS += DAP_SIGNATURE NETGEAR_BOARD_ID NETGEAR_HW_ID NETGEAR_KERNEL_MAGIC ROOTFS_SIZE SEAMA_SIGNATURE
|
|
|
|
define Build/alfa-network-rootfs-header
|
|
mkimage \
|
|
-A mips -O linux -T filesystem -C lzma -a 0 -e 0 \
|
|
-n 'RootfsImage' -d $@ $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Build/append-md5sum-bin
|
|
$(STAGING_DIR_HOST)/bin/mkhash md5 $@ | sed 's/../\\\\x&/g' |\
|
|
xargs echo -ne >> $@
|
|
endef
|
|
|
|
define Build/append-string
|
|
echo -n $(1) >> $@
|
|
endef
|
|
|
|
define Build/mkbuffaloimg
|
|
$(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
|
|
-R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
|
|
-K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \
|
|
-i $@ -o $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/mkwrggimg
|
|
$(STAGING_DIR_HOST)/bin/mkwrggimg -b \
|
|
-i $@ -o $@.imghdr -d /dev/mtdblock/1 \
|
|
-m $(BOARDNAME) -s $(DAP_SIGNATURE) \
|
|
-v $(VERSION_DIST) -B $(REVISION)
|
|
mv $@.imghdr $@
|
|
endef
|
|
|
|
define Build/netgear-squashfs
|
|
rm -rf $@.fs $@.squashfs
|
|
mkdir -p $@.fs/image
|
|
cp $@ $@.fs/image/uImage
|
|
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
|
|
$@.fs $@.squashfs \
|
|
-noappend -root-owned -be -b 65536 \
|
|
$(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
|
|
|
|
dd if=/dev/zero bs=1k count=1 >> $@.squashfs
|
|
mkimage \
|
|
-A mips -O linux -T filesystem -C none \
|
|
-M $(NETGEAR_KERNEL_MAGIC) \
|
|
-a 0xbf070000 -e 0xbf070000 \
|
|
-n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
|
|
-d $@.squashfs $@
|
|
rm -rf $@.squashfs $@.fs
|
|
endef
|
|
|
|
define Build/netgear-uImage
|
|
$(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
|
|
endef
|
|
|
|
define Build/relocate-kernel
|
|
rm -rf $@.relocate
|
|
$(CP) ../../generic/image/relocate $@.relocate
|
|
$(MAKE) -j1 -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS)
|
|
( \
|
|
dd if=$@.relocate/loader.bin bs=32 conv=sync && \
|
|
perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
|
|
cat "$@" \
|
|
) > "$@.new"
|
|
mv "$@.new" "$@"
|
|
rm -rf $@.relocate
|
|
endef
|
|
|
|
define Build/seama
|
|
$(STAGING_DIR_HOST)/bin/seama -i $@ $(if $(1),$(1),-m "dev=/dev/mtdblock/1" -m "type=firmware")
|
|
mv $@.seama $@
|
|
endef
|
|
|
|
define Build/seama-seal
|
|
$(call Build/seama,-s $@.seama $(1))
|
|
endef
|
|
|
|
define Build/teltonika-fw-fake-checksum
|
|
# Teltonika U-Boot web based firmware upgrade/recovery routine compares
|
|
# 16 bytes from md5sum1[16] field in TP-Link v1 header (offset: 76 bytes
|
|
# from begin of the firmware file) with 16 bytes stored just before
|
|
# 0xdeadc0de marker. Values are only compared, MD5 sum is not verified.
|
|
let \
|
|
offs="$$(stat -c%s $@) - 20"; \
|
|
dd if=$@ bs=1 count=16 skip=76 |\
|
|
dd of=$@ bs=1 count=16 seek=$$offs conv=notrunc
|
|
endef
|
|
|
|
define Build/uImageHiWiFi
|
|
# Field ih_name needs to start with "tw150v1"
|
|
mkimage -A $(LINUX_KARCH) \
|
|
-O linux -T kernel \
|
|
-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
|
|
-n 'tw150v1 $(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' -d $@ $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Build/wrgg-pad-rootfs
|
|
$(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
|
|
endef
|
|
|
|
|
|
define Device/ap121f
|
|
DEVICE_TITLE := ALFA Network AP121F
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage -swconfig
|
|
BOARDNAME := AP121F
|
|
IMAGE_SIZE := 16064k
|
|
CONSOLE := ttyATH0,115200
|
|
MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
|
|
SUPPORTED_DEVICES := ap121f
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += ap121f
|
|
|
|
define Device/ap531b0
|
|
DEVICE_TITLE := Rockeetech AP531B0
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := AP531B0
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += ap531b0
|
|
|
|
define Device/ap90q
|
|
DEVICE_TITLE := YunCore AP80Q/AP90Q
|
|
BOARDNAME := AP90Q
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += ap90q
|
|
|
|
define Device/ap91-5g
|
|
DEVICE_TITLE := ALFA Network AP91-5G
|
|
DEVICE_PACKAGES := rssileds -swconfig
|
|
BOARDNAME := AP91-5G
|
|
IMAGE_SIZE := 7744k
|
|
KERNEL_SIZE := 1600k
|
|
ROOTFS_SIZE := 6144k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),6144k(rootfs),1600k(kernel),64k(config)ro,64k(art)ro,7744k@0x50000(firmware)
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs |\
|
|
alfa-network-rootfs-header | append-kernel | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs |\
|
|
pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += ap91-5g
|
|
|
|
define Device/arduino-yun
|
|
DEVICE_TITLE := Arduino Yun
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := Yun
|
|
IMAGE_SIZE := 15936k
|
|
CONSOLE := ttyATH0,250000
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15936k(firmware),64k(nvram),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += arduino-yun
|
|
|
|
define Device/bsb
|
|
DEVICE_TITLE := Smart Electronics Black Swift board
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := BSB
|
|
IMAGE_SIZE := 16000k
|
|
CONSOLE := ttyATH0,115200
|
|
MTDPARTS := spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += bsb
|
|
|
|
define Device/carambola2
|
|
DEVICE_TITLE := 8devices Carambola2
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := CARAMBOLA2
|
|
IMAGE_SIZE := 16000k
|
|
CONSOLE := ttyATH0,115200
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += carambola2
|
|
|
|
define Device/cf-e316n-v2
|
|
DEVICE_TITLE := COMFAST CF-E316N v2
|
|
DEVICE_PACKAGES := -swconfig -uboot-envtools
|
|
BOARDNAME := CF-E316N-V2
|
|
IMAGE_SIZE := 16192k
|
|
MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
|
|
endef
|
|
TARGET_DEVICES += cf-e316n-v2
|
|
|
|
define Device/cf-e320n-v2
|
|
$(Device/cf-e316n-v2)
|
|
DEVICE_TITLE := COMFAST CF-E320N v2
|
|
DEVICE_PACKAGES += kmod-usb-core kmod-usb2
|
|
BOARDNAME := CF-E320N-V2
|
|
endef
|
|
TARGET_DEVICES += cf-e320n-v2
|
|
|
|
define Device/cf-e355ac-v1
|
|
DEVICE_TITLE := COMFAST CF-E355AC v1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x \
|
|
-swconfig -uboot-envtools
|
|
BOARDNAME := CF-E355AC-V1
|
|
IMAGE_SIZE := 16192k
|
|
MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
|
|
endef
|
|
TARGET_DEVICES += cf-e355ac-v1
|
|
|
|
define Device/cf-e355ac-v2
|
|
$(Device/cf-e355ac-v1)
|
|
DEVICE_TITLE := COMFAST CF-E355AC v2
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9888 \
|
|
-swconfig -uboot-envtools
|
|
BOARDNAME := CF-E355AC-V2
|
|
endef
|
|
TARGET_DEVICES += cf-e355ac-v2
|
|
|
|
define Device/cf-e375ac
|
|
DEVICE_TITLE := COMFAST CF-E375AC
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9888 \
|
|
-uboot-envtools
|
|
BOARDNAME := CF-E375AC
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
|
|
endef
|
|
TARGET_DEVICES += cf-e375ac
|
|
|
|
define Device/cf-e380ac-v1
|
|
DEVICE_TITLE := COMFAST CF-E380AC v1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x \
|
|
-swconfig -uboot-envtools
|
|
BOARDNAME := CF-E380AC-V1
|
|
IMAGE_SIZE := 16128k
|
|
MTDPARTS := spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro
|
|
endef
|
|
TARGET_DEVICES += cf-e380ac-v1
|
|
|
|
define Device/cf-e380ac-v2
|
|
$(Device/cf-e380ac-v1)
|
|
DEVICE_TITLE := COMFAST CF-E380AC v2
|
|
BOARDNAME := CF-E380AC-V2
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
|
|
endef
|
|
TARGET_DEVICES += cf-e380ac-v2
|
|
|
|
define Device/cf-e385ac
|
|
DEVICE_TITLE := COMFAST CF-E385AC
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9984 \
|
|
-uboot-envtools
|
|
BOARDNAME := CF-E385AC
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
|
|
endef
|
|
TARGET_DEVICES += cf-e385ac
|
|
|
|
define Device/cf-e520n
|
|
DEVICE_TITLE := COMFAST CF-E520N
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig -uboot-envtools
|
|
BOARDNAME := CF-E520N
|
|
IMAGE_SIZE := 8000k
|
|
MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
|
|
endef
|
|
TARGET_DEVICES += cf-e520n
|
|
|
|
define Device/cf-e530n
|
|
$(Device/cf-e520n)
|
|
DEVICE_TITLE := COMFAST CF-E530N
|
|
BOARDNAME := CF-E530N
|
|
endef
|
|
TARGET_DEVICES += cf-e530n
|
|
|
|
define Device/cpe505n
|
|
DEVICE_TITLE := P&W CPE505N
|
|
BOARDNAME := CPE505N
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += cpe505n
|
|
|
|
define Device/cpe830
|
|
$(Device/ap90q)
|
|
DEVICE_TITLE := YunCore CPE830
|
|
DEVICE_PACKAGES := rssileds
|
|
BOARDNAME := CPE830
|
|
endef
|
|
TARGET_DEVICES += cpe830
|
|
|
|
define Device/cpe870
|
|
DEVICE_TITLE := YunCore CPE870
|
|
DEVICE_PACKAGES := rssileds
|
|
BOARDNAME := CPE870
|
|
IMAGE_SIZE := 7936k
|
|
MTDPARTS := spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += cpe870
|
|
|
|
define Device/dragino2
|
|
BOARDNAME := DRAGINO2
|
|
CONSOLE := ttyATH0,115200
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
DEVICE_TITLE := Dragino 2 (MS14)
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += dragino2
|
|
|
|
define Device/e1700ac-v2-16M
|
|
DEVICE_TITLE := WHQX E1700AC v2 (16MB flash)
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x kmod-usb-core \
|
|
kmod-usb2 kmod-usb-ledtrig-usbport
|
|
BOARDNAME := E1700AC-V2
|
|
SUPPORTED_DEVICES := e1700ac-v2
|
|
IMAGE_SIZE := 15936k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += e1700ac-v2-16M
|
|
|
|
define Device/e1700ac-v2-8M
|
|
$(Device/e1700ac-v2-16M)
|
|
DEVICE_TITLE := WHQX E1700AC v2 (8MB flash)
|
|
IMAGE_SIZE := 7744k
|
|
endef
|
|
TARGET_DEVICES += e1700ac-v2-8M
|
|
|
|
define Device/e600g-v2-16M
|
|
DEVICE_TITLE := WHQX E600G v2 (16MB flash)
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
|
|
BOARDNAME := E600G-V2
|
|
SUPPORTED_DEVICES := e600g-v2
|
|
IMAGE_SIZE := 15936k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += e600g-v2-16M
|
|
|
|
define Device/e600g-v2-8M
|
|
$(Device/e600g-v2-16M)
|
|
DEVICE_TITLE := WHQX E600G v2 (8MB flash)
|
|
IMAGE_SIZE := 7744k
|
|
endef
|
|
TARGET_DEVICES += e600g-v2-8M
|
|
|
|
define Device/e600gac-v2-16M
|
|
DEVICE_TITLE := WHQX E600GAC v2 (16MB flash)
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 kmod-usb-core \
|
|
kmod-usb2 -swconfig
|
|
BOARDNAME := E600GAC-V2
|
|
SUPPORTED_DEVICES := e600gac-v2
|
|
IMAGE_SIZE := 15936k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += e600gac-v2-16M
|
|
|
|
define Device/e600gac-v2-8M
|
|
$(Device/e600gac-v2-16M)
|
|
DEVICE_TITLE := WHQX E600GAC v2 (8MB flash)
|
|
IMAGE_SIZE := 7744k
|
|
endef
|
|
TARGET_DEVICES += e600gac-v2-8M
|
|
|
|
define Device/ew-balin
|
|
DEVICE_TITLE := Embedded Wireless Balin Platform
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea
|
|
BOARDNAME := EW-BALIN
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += ew-balin
|
|
|
|
define Device/ew-dorin
|
|
$(Device/ew-balin)
|
|
DEVICE_TITLE := Embedded Wireless Dorin Platform
|
|
BOARDNAME := EW-DORIN
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += ew-dorin
|
|
|
|
define Device/ew-dorin-router
|
|
$(Device/ew-dorin)
|
|
DEVICE_TITLE := Embedded Wireless Dorin Router Platform
|
|
BOARDNAME := EW-DORIN-ROUTER
|
|
endef
|
|
TARGET_DEVICES += ew-dorin-router
|
|
|
|
define Device/rme-eg200
|
|
DEVICE_TITLE := eTactica EG-200
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-oneshot \
|
|
kmod-usb-serial kmod-usb-serial-ftdi \
|
|
kmod-usb-storage \
|
|
kmod-fs-ext4
|
|
BOARDNAME := RME-EG200
|
|
IMAGE_SIZE := 16000k
|
|
CONSOLE := ttyATH0,115200
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += rme-eg200
|
|
|
|
define Device/weio
|
|
DEVICE_TITLE := WeIO
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := WEIO
|
|
IMAGE_SIZE := 16000k
|
|
CONSOLE := ttyATH0,115200
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += weio
|
|
|
|
define Device/gl-ar150
|
|
DEVICE_TITLE := GL.iNet GL-AR150
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := GL-AR150
|
|
IMAGE_SIZE := 16000k
|
|
CONSOLE := ttyATH0,115200
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += gl-ar150
|
|
|
|
define Device/gl-ar300
|
|
DEVICE_TITLE := GL.iNet GL-AR300
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := GL-AR300
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += gl-ar300
|
|
|
|
define Device/gl-ar300m
|
|
DEVICE_TITLE := GL.iNet GL-AR300M
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := GL-AR300M
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += gl-ar300m
|
|
|
|
define Device/gl-ar750
|
|
DEVICE_TITLE := GL.iNet GL-AR750
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 kmod-usb-core \
|
|
kmod-usb2 kmod-usb-storage
|
|
BOARDNAME := GL-AR750
|
|
SUPPORTED_DEVICES := gl-ar750
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += gl-ar750
|
|
|
|
define Device/gl-domino
|
|
DEVICE_TITLE := GL.iNet Domino Pi
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := DOMINO
|
|
IMAGE_SIZE := 16000k
|
|
CONSOLE := ttyATH0,115200
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += gl-domino
|
|
|
|
define Device/gl-mifi
|
|
DEVICE_TITLE := GL.iNet GL-MiFi
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := GL-MIFI
|
|
IMAGE_SIZE := 16000k
|
|
CONSOLE := ttyATH0,115200
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += gl-mifi
|
|
|
|
define Device/gl-usb150
|
|
DEVICE_TITLE := GL.iNet GL-USB150
|
|
DEVICE_PACKAGES := -swconfig
|
|
BOARDNAME := GL-USB150
|
|
IMAGE_SIZE := 16000k
|
|
CONSOLE := ttyATH0,115200
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
SUPPORTED_DEVICES := gl-usb150
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += gl-usb150
|
|
|
|
define Device/lan-turtle
|
|
$(Device/tplink-16mlzma)
|
|
DEVICE_TITLE := Hak5 LAN Turtle
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \
|
|
-kmod-ath9k -swconfig -uboot-envtools -wpad-mini
|
|
BOARDNAME := LAN-TURTLE
|
|
DEVICE_PROFILE := LANTURTLE
|
|
TPLINK_HWID := 0x5348334c
|
|
CONSOLE := ttyATH0,115200
|
|
IMAGES := sysupgrade.bin
|
|
endef
|
|
TARGET_DEVICES += lan-turtle
|
|
|
|
define Device/lima
|
|
DEVICE_TITLE := 8devices Lima
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := LIMA
|
|
IMAGE_SIZE := 15616k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,256k(art)ro,-(firmware)
|
|
endef
|
|
TARGET_DEVICES += lima
|
|
|
|
define Device/mr12
|
|
DEVICE_TITLE := Meraki MR12
|
|
DEVICE_PACKAGES := kmod-spi-gpio
|
|
BOARDNAME := MR12
|
|
ROOTFS_SIZE := 13440k
|
|
IMAGE_SIZE := 15680k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
|
|
IMAGE/kernel.bin := append-kernel
|
|
IMAGE/rootfs.bin := append-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
|
|
IMAGES := kernel.bin rootfs.bin sysupgrade.bin
|
|
endef
|
|
TARGET_DEVICES += mr12
|
|
|
|
define Device/mr16
|
|
$(Device/mr12)
|
|
DEVICE_TITLE := Meraki MR16
|
|
BOARDNAME := MR16
|
|
endef
|
|
TARGET_DEVICES += mr16
|
|
|
|
define Device/dr342
|
|
DEVICE_TITLE := Wallys DR342
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
|
|
BOARDNAME := DR342
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += dr342
|
|
|
|
define Device/dr344
|
|
DEVICE_TITLE := Wallys DR344
|
|
BOARDNAME := DR344
|
|
KERNEL_SIZE := 1408k
|
|
ROOTFS_SIZE := 6336k
|
|
IMAGE_SIZE := 7744k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
|
|
define Device/dr531
|
|
DEVICE_TITLE := Wallys DR531
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := DR531
|
|
IMAGE_SIZE := 7808k
|
|
MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += dr531
|
|
|
|
define Device/wndr3700
|
|
DEVICE_TITLE := NETGEAR WNDR3700
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-wndr3700-usb
|
|
BOARDNAME := WNDR3700
|
|
NETGEAR_KERNEL_MAGIC := 0x33373030
|
|
NETGEAR_BOARD_ID := WNDR3700
|
|
IMAGE_SIZE := 7680k
|
|
MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
|
|
IMAGES := sysupgrade.bin factory.img factory-NA.img
|
|
KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += wndr3700
|
|
|
|
define Device/wndr3700v2
|
|
$(Device/wndr3700)
|
|
DEVICE_TITLE := NETGEAR WNDR3700 v2
|
|
NETGEAR_BOARD_ID := WNDR3700v2
|
|
NETGEAR_KERNEL_MAGIC := 0x33373031
|
|
NETGEAR_HW_ID := 29763654+16+64
|
|
IMAGE_SIZE := 15872k
|
|
MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
|
|
IMAGES := sysupgrade.bin factory.img
|
|
endef
|
|
TARGET_DEVICES += wndr3700v2
|
|
|
|
define Device/wndr3800
|
|
$(Device/wndr3700v2)
|
|
DEVICE_TITLE := NETGEAR WNDR3800
|
|
NETGEAR_BOARD_ID := WNDR3800
|
|
NETGEAR_HW_ID := 29763654+16+128
|
|
endef
|
|
TARGET_DEVICES += wndr3800
|
|
|
|
define Device/wndr3800ch
|
|
$(Device/wndr3800)
|
|
DEVICE_TITLE := NETGEAR WNDR3800 (Ch)
|
|
NETGEAR_BOARD_ID := WNDR3800CH
|
|
endef
|
|
TARGET_DEVICES += wndr3800ch
|
|
|
|
define Device/wndrmac
|
|
$(Device/wndr3700v2)
|
|
DEVICE_TITLE := NETGEAR WNDRMAC
|
|
NETGEAR_BOARD_ID := WNDRMAC
|
|
endef
|
|
TARGET_DEVICES += wndrmac
|
|
|
|
define Device/wndrmacv2
|
|
$(Device/wndr3800)
|
|
DEVICE_TITLE := NETGEAR WNDRMAC v2
|
|
NETGEAR_BOARD_ID := WNDRMACv2
|
|
endef
|
|
TARGET_DEVICES += wndrmacv2
|
|
|
|
define Device/cap324
|
|
DEVICE_TITLE := PowerCloud CAP324 Cloud AP
|
|
BOARDNAME := CAP324
|
|
DEVICE_PROFILE := CAP324
|
|
IMAGE_SIZE := 15296k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15296k(firmware),640k(certs),64k(nvram),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += cap324
|
|
|
|
define Device/cap324-nocloud
|
|
DEVICE_TITLE := PowerCloud CAP324 Cloud AP (No-Cloud)
|
|
BOARDNAME := CAP324
|
|
DEVICE_PROFILE := CAP324
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += cap324-nocloud
|
|
|
|
define Device/cr3000
|
|
DEVICE_TITLE := PowerCloud CR3000 Cloud Router
|
|
BOARDNAME := CR3000
|
|
DEVICE_PROFILE := CR3000
|
|
IMAGE_SIZE := 7104k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += cr3000
|
|
|
|
define Device/cr3000-nocloud
|
|
DEVICE_TITLE := PowerCloud CR3000 (No-Cloud)
|
|
BOARDNAME := CR3000
|
|
DEVICE_PROFILE := CR3000
|
|
IMAGE_SIZE := 7808k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += cr3000-nocloud
|
|
|
|
define Device/cr5000
|
|
DEVICE_TITLE := PowerCloud CR5000 Cloud Router
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
|
|
BOARDNAME := CR5000
|
|
DEVICE_PROFILE := CR5000
|
|
IMAGE_SIZE := 7104k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += cr5000
|
|
|
|
define Device/cr5000-nocloud
|
|
DEVICE_TITLE := PowerCloud CR5000 (No-Cloud)
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
|
|
BOARDNAME := CR5000
|
|
DEVICE_PROFILE := CR5000
|
|
IMAGE_SIZE := 7808k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += cr5000-nocloud
|
|
|
|
define Device/packet-squirrel
|
|
$(Device/tplink-16mlzma)
|
|
DEVICE_TITLE := Hak5 Packet Squirrel
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 \
|
|
-kmod-ath9k -swconfig -uboot-envtools -wpad-mini
|
|
BOARDNAME := PACKET-SQUIRREL
|
|
DEVICE_PROFILE := PACKETSQUIRREL
|
|
TPLINK_HWID := 0x5351524c
|
|
CONSOLE := ttyATH0,115200
|
|
IMAGES := sysupgrade.bin
|
|
endef
|
|
TARGET_DEVICES += packet-squirrel
|
|
|
|
define Device/pqi-air-pen
|
|
DEVICE_TITLE := PQI Air Pen
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
|
|
BOARDNAME := PQI-AIR-PEN
|
|
IMAGE_SIZE := 7744k
|
|
CONSOLE := ttyATH0,115200
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF)
|
|
endef
|
|
TARGET_DEVICES += pqi-air-pen
|
|
|
|
define Device/antminer-s1
|
|
$(Device/tplink-8mlzma)
|
|
DEVICE_TITLE := Antminer-S1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid
|
|
BOARDNAME := ANTMINER-S1
|
|
DEVICE_PROFILE := ANTMINERS1
|
|
TPLINK_HWID := 0x04440101
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += antminer-s1
|
|
|
|
define Device/antminer-s3
|
|
$(Device/tplink-8mlzma)
|
|
DEVICE_TITLE := Antminer-S3
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid
|
|
BOARDNAME := ANTMINER-S3
|
|
DEVICE_PROFILE := ANTMINERS3
|
|
TPLINK_HWID := 0x04440301
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += antminer-s3
|
|
|
|
define Device/antrouter-r1
|
|
$(Device/tplink-8mlzma)
|
|
DEVICE_TITLE := Antrouter-R1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := ANTROUTER-R1
|
|
DEVICE_PROFILE := ANTROUTERR1
|
|
TPLINK_HWID := 0x44440101
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += antrouter-r1
|
|
|
|
define Device/el-m150
|
|
$(Device/tplink-8mlzma)
|
|
DEVICE_TITLE := EasyLink EL-M150
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := EL-M150
|
|
DEVICE_PROFILE := ELM150
|
|
TPLINK_HWID := 0x01500101
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += el-m150
|
|
|
|
define Device/el-mini
|
|
$(Device/tplink-8mlzma)
|
|
DEVICE_TITLE := EasyLink EL-MINI
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := EL-MINI
|
|
DEVICE_PROFILE := ELMINI
|
|
TPLINK_HWID := 0x01530001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += el-mini
|
|
|
|
define Device/gl-inet-6408A-v1
|
|
$(Device/tplink-8mlzma)
|
|
DEVICE_TITLE := GL.iNet 6408
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := GL-INET
|
|
DEVICE_PROFILE := GLINET
|
|
TPLINK_HWID := 0x08000001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += gl-inet-6408A-v1
|
|
|
|
define Device/gl-inet-6416A-v1
|
|
$(Device/tplink-16mlzma)
|
|
DEVICE_TITLE := GL.iNet 6416
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := GL-INET
|
|
DEVICE_PROFILE := GLINET
|
|
TPLINK_HWID := 0x08000001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += gl-inet-6416A-v1
|
|
|
|
define Device/jwap230
|
|
DEVICE_TITLE := jjPlus JWAP230
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := JWAP230
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += jwap230
|
|
|
|
define Device/r36a
|
|
DEVICE_TITLE := ALFA Network R36A
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport -swconfig
|
|
BOARDNAME := R36A
|
|
SUPPORTED_DEVICES := r36a
|
|
IMAGE_SIZE := 15872k
|
|
MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += r36a
|
|
|
|
define Device/r602n
|
|
DEVICE_TITLE := P&W R602N
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := R602N
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += r602n
|
|
|
|
define Device/rut900
|
|
DEVICE_TITLE := Teltonika RUT900
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -uboot-envtools
|
|
BOARDNAME := RUT900
|
|
SUPPORTED_DEVICES := rut900
|
|
IMAGE_SIZE := 15552k
|
|
MTDPARTS := spi0.0:128k(u-boot)ro,64k(config)ro,64k(art)ro,15552k(firmware),576k(event-log)ro
|
|
TPLINK_HWID := 0x35000001
|
|
TPLINK_HWREV := 0x1
|
|
TPLINK_HEADER_VERSION := 1
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
|
|
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\
|
|
pad-rootfs | teltonika-fw-fake-checksum | append-string master |\
|
|
append-md5sum-bin | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
|
|
append-rootfs | pad-rootfs | append-metadata |\
|
|
check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += rut900
|
|
|
|
define Device/mc-mac1200r
|
|
$(Device/tplink-8mlzma)
|
|
DEVICE_TITLE := Mercury MAC1200R
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
|
|
BOARDNAME := MC-MAC1200R
|
|
DEVICE_PROFILE := MAC1200R
|
|
TPLINK_HWID := 0x12000001
|
|
endef
|
|
TARGET_DEVICES += mc-mac1200r
|
|
|
|
define Device/minibox-v1
|
|
$(Device/tplink-16mlzma)
|
|
DEVICE_TITLE := GainStrong MiniBox V1.0
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := MINIBOX-V1
|
|
DEVICE_PROFILE := MINIBOXV1
|
|
TPLINK_HWID := 0x3C000201
|
|
CONSOLE := ttyATH0,115200
|
|
IMAGES := sysupgrade.bin
|
|
endef
|
|
TARGET_DEVICES += minibox-v1
|
|
|
|
define Device/oolite-v1
|
|
$(Device/minibox-v1)
|
|
DEVICE_TITLE := GainStrong Oolite V1.0
|
|
BOARDNAME := OOLITE-V1
|
|
DEVICE_PROFILE := OOLITEV1
|
|
TPLINK_HWID := 0x3C000101
|
|
endef
|
|
TARGET_DEVICES += oolite-v1
|
|
|
|
define Device/oolite-v5.2
|
|
$(Device/tplink-16mlzma)
|
|
DEVICE_TITLE := GainStrong Oolite V5.2
|
|
DEVICE_PACKAGES := ath10k-firmware-qca9887 kmod-ath10k kmod-usb-core kmod-usb2
|
|
BOARDNAME := OOLITE-V5-2
|
|
DEVICE_PROFILE := OOLITEV52
|
|
TPLINK_HWID := 0x3C00010B
|
|
IMAGES := sysupgrade.bin
|
|
endef
|
|
TARGET_DEVICES += oolite-v5.2
|
|
|
|
define Device/oolite-v5.2-dev
|
|
$(Device/oolite-v5.2)
|
|
DEVICE_TITLE := GainStrong Oolite V5.2-Dev (development board)
|
|
BOARDNAME := OOLITE-V5-2-DEV
|
|
DEVICE_PROFILE := OOLITEV52DEV
|
|
endef
|
|
TARGET_DEVICES += oolite-v5.2-dev
|
|
|
|
define Device/omy-g1
|
|
$(Device/tplink-16mlzma)
|
|
DEVICE_TITLE := OMYlink OMY-G1
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := OMY-G1
|
|
DEVICE_PROFILE := OMYG1
|
|
TPLINK_HWID := 0x06660101
|
|
endef
|
|
TARGET_DEVICES += omy-g1
|
|
|
|
define Device/omy-x1
|
|
$(Device/tplink-8mlzma)
|
|
DEVICE_TITLE := OMYlink OMY-X1
|
|
BOARDNAME := OMY-X1
|
|
DEVICE_PROFILE := OMYX1
|
|
TPLINK_HWID := 0x06660201
|
|
endef
|
|
TARGET_DEVICES += omy-x1
|
|
|
|
define Device/onion-omega
|
|
$(Device/tplink-16mlzma)
|
|
DEVICE_TITLE := Onion Omega
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial
|
|
BOARDNAME := ONION-OMEGA
|
|
DEVICE_PROFILE := OMEGA
|
|
TPLINK_HWID := 0x04700001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += onion-omega
|
|
|
|
define Device/sc1750
|
|
DEVICE_TITLE := Abicom SC1750
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
BOARDNAME := SC1750
|
|
IMAGE_SIZE := 15744k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
|
|
endef
|
|
TARGET_DEVICES += sc1750
|
|
|
|
define Device/sc300m
|
|
DEVICE_TITLE := Abicom SC300M
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
BOARDNAME := SC300M
|
|
IMAGE_SIZE := 15744k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
|
|
endef
|
|
TARGET_DEVICES += sc300m
|
|
|
|
define Device/sc450
|
|
DEVICE_TITLE := Abicom SC450
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
BOARDNAME := SC450
|
|
IMAGE_SIZE := 15744k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
|
|
endef
|
|
TARGET_DEVICES += sc450
|
|
|
|
define Device/smart-300
|
|
$(Device/tplink-8mlzma)
|
|
DEVICE_TITLE := NC-LINK SMART-300
|
|
BOARDNAME := SMART-300
|
|
DEVICE_PROFILE := SMART-300
|
|
TPLINK_HWID := 0x93410001
|
|
endef
|
|
TARGET_DEVICES += smart-300
|
|
|
|
define Device/som9331
|
|
$(Device/tplink-8mlzma)
|
|
DEVICE_TITLE := OpenEmbed SOM9331
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial
|
|
BOARDNAME := SOM9331
|
|
DEVICE_PROFILE := SOM9331
|
|
TPLINK_HWID := 0x04800054
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += som9331
|
|
|
|
define Device/sr3200
|
|
DEVICE_TITLE := YunCore SR3200
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
|
|
BOARDNAME := SR3200
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += sr3200
|
|
|
|
define Device/xd3200
|
|
$(Device/sr3200)
|
|
DEVICE_TITLE := YunCore XD3200
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
|
|
BOARDNAME := XD3200
|
|
endef
|
|
TARGET_DEVICES += xd3200
|
|
|
|
define Device/t830
|
|
DEVICE_TITLE := YunCore T830
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
BOARDNAME := T830
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
SUPPORTED_DEVICES := t830
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += t830
|
|
|
|
define Device/tellstick-znet-lite
|
|
$(Device/tplink-16mlzma)
|
|
DEVICE_TITLE := TellStick ZNet Lite
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-acm kmod-usb-serial kmod-usb-serial-pl2303
|
|
BOARDNAME := TELLSTICK-ZNET-LITE
|
|
DEVICE_PROFILE := TELLSTICKZNETLITE
|
|
TPLINK_HWID := 0x00726001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += tellstick-znet-lite
|
|
|
|
define Device/n5q
|
|
DEVICE_TITLE := ALFA Network N5Q
|
|
DEVICE_PACKAGES := rssileds -swconfig
|
|
BOARDNAME := N5Q
|
|
SUPPORTED_DEVICES := n5q
|
|
IMAGE_SIZE := 15872k
|
|
MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += n5q
|
|
|
|
define Device/NBG6616
|
|
DEVICE_TITLE := ZyXEL NBG6616
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k ath10k-firmware-qca988x
|
|
BOARDNAME := NBG6616
|
|
KERNEL_SIZE := 2048k
|
|
IMAGE_SIZE := 15323k
|
|
MTDPARTS := spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware)
|
|
CMDLINE += mem=128M
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
# We cannot currently build a factory image. It is the sysupgrade image
|
|
# prefixed with a header (which is actually written into the MTD device).
|
|
# The header is 2kiB and is filled with 0xff. The format seems to be:
|
|
# 2 bytes: 0x0000
|
|
# 2 bytes: checksum of the data partition (big endian)
|
|
# 4 bytes: length of the contained image file (big endian)
|
|
# 32 bytes: Firmware Version string (NUL terminated, 0xff padded)
|
|
# 2 bytes: 0x0000
|
|
# 2 bytes: checksum over the header partition (big endian)
|
|
# 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded)
|
|
# rest: 0xff padding
|
|
#
|
|
# The checksums are calculated by adding up all bytes and if a 16bit
|
|
# overflow occurs, one is added and the sum is masked to 16 bit:
|
|
# csum = csum + databyte; if (csum > 0xffff) { csum += 1; csum &= 0xffff };
|
|
# Should the file have an odd number of bytes then the byte len-0x800 is
|
|
# used additionally.
|
|
# The checksum for the header is calcualted over the first 2048 bytes with
|
|
# the firmware checksum as the placeholder during calculation.
|
|
#
|
|
# The header is padded with 0xff to the erase block size of the device.
|
|
endef
|
|
TARGET_DEVICES += NBG6616
|
|
|
|
define Device/c-55
|
|
DEVICE_TITLE := AirTight Networks C-55
|
|
DEVICE_PACKAGES := kmod-ath9k
|
|
BOARDNAME := C-55
|
|
KERNEL_SIZE := 2048k
|
|
IMAGE_SIZE := 15872k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += c-55
|
|
|
|
define Device/hiwifi-hc6361
|
|
DEVICE_TITLE := HiWiFi HC6361
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \
|
|
kmod-fs-ext4 kmod-nls-iso8859-1 e2fsprogs
|
|
BOARDNAME := HiWiFi-HC6361
|
|
DEVICE_PROFILE := HIWIFI_HC6361
|
|
IMAGE_SIZE := 16128k
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImageHiWiFi lzma
|
|
CONSOLE := ttyATH0,115200
|
|
MTDPARTS := spi0.0:64k(u-boot)ro,64k(bdinfo)ro,16128k(firmware),64k(backup)ro,64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += hiwifi-hc6361
|
|
|
|
define Device/seama
|
|
LOADER_TYPE := bin
|
|
BLOCKSIZE := 64k
|
|
KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
|
|
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | seama
|
|
KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX).seama
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
|
|
# 64 bytes offset:
|
|
# - 28 bytes seama_header
|
|
# - 36 bytes of META data (4-bytes aligned)
|
|
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
|
|
IMAGE/sysupgrade.bin := \
|
|
$$(IMAGE/default) | seama | pad-rootfs | \
|
|
check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.bin := \
|
|
$$(IMAGE/default) | seama | pad-rootfs | \
|
|
seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
|
|
check-size $$$$(IMAGE_SIZE)
|
|
SEAMA_SIGNATURE :=
|
|
endef
|
|
|
|
define Device/dir-869-a1
|
|
$(Device/seama)
|
|
DEVICE_TITLE := D-Link DIR-869 rev. A1
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
|
|
BOARDNAME := DIR-869-A1
|
|
IMAGE_SIZE := 15872k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
|
|
SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869
|
|
IMAGE/factory.bin := \
|
|
$$(IMAGE/default) | pad-rootfs -x 64 | \
|
|
seama | seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
|
|
check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += dir-869-a1
|
|
|
|
define Device/mynet-n600
|
|
$(Device/seama)
|
|
DEVICE_TITLE := Western Digital My Net N600
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := MYNET-N600
|
|
IMAGE_SIZE := 15808k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
|
|
SEAMA_SIGNATURE := wrgnd16_wd_db600
|
|
endef
|
|
TARGET_DEVICES += mynet-n600
|
|
|
|
define Device/mynet-n750
|
|
$(Device/seama)
|
|
DEVICE_TITLE := Western Digital My Net N750
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := MYNET-N750
|
|
IMAGE_SIZE := 15808k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
|
|
SEAMA_SIGNATURE := wrgnd13_wd_av
|
|
endef
|
|
TARGET_DEVICES += mynet-n750
|
|
|
|
define Device/qihoo-c301
|
|
$(Device/seama)
|
|
DEVICE_TITLE := Qihoo C301
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
|
|
BOARDNAME := QIHOO-C301
|
|
IMAGE_SIZE := 15744k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
|
|
SEAMA_SIGNATURE := wrgac26_qihoo360_360rg
|
|
endef
|
|
TARGET_DEVICES += qihoo-c301
|
|
|
|
define Device/dap-2695-a1
|
|
DEVICE_TITLE := D-Link DAP-2695 rev. A1
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x kmod-ath10k
|
|
BOARDNAME := DAP-2695-A1
|
|
IMAGES := factory.img sysupgrade.bin
|
|
IMAGE_SIZE := 15360k
|
|
IMAGE/factory.img := append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
|
|
KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
|
|
MTDPARTS := spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro
|
|
DAP_SIGNATURE := wapac02_dkbs_dap2695
|
|
endef
|
|
TARGET_DEVICES += dap-2695-a1
|
|
|
|
define Device/bhr-4grv2
|
|
DEVICE_TITLE := Buffalo BHR-4GRV2
|
|
BOARDNAME := BHR-4GRV2
|
|
ROOTFS_SIZE := 14528k
|
|
KERNEL_SIZE := 1472k
|
|
IMAGE_SIZE := 16000k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg
|
|
endef
|
|
TARGET_DEVICES += bhr-4grv2
|
|
|
|
define Device/wam250
|
|
DEVICE_TITLE := Samsung WAM250
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
|
|
BOARDNAME := WAM250
|
|
IMAGE_SIZE := 15872k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),128k(nvram)ro,15872k(firmware),64k(art)ro
|
|
SUPPORTED_DEVICES := wam250
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += wam250
|
|
|
|
define Device/wifi-pineapple-nano
|
|
$(Device/tplink-16mlzma)
|
|
DEVICE_TITLE := Hak5 WiFi Pineapple NANO
|
|
DEVICE_PACKAGES := kmod-ath9k-htc kmod-usb-core kmod-usb2 kmod-usb-storage \
|
|
-swconfig -uboot-envtools
|
|
BOARDNAME := WIFI-PINEAPPLE-NANO
|
|
DEVICE_PROFILE := WIFIPINEAPPLENANO
|
|
TPLINK_HWID := 0x4e414e4f
|
|
CONSOLE := ttyATH0,115200
|
|
IMAGES := sysupgrade.bin
|
|
endef
|
|
TARGET_DEVICES += wifi-pineapple-nano
|
|
|
|
define Device/wlr8100
|
|
DEVICE_TITLE := Sitecom WLR-8100
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb3 \
|
|
kmod-ath10k ath10k-firmware-qca988x
|
|
BOARDNAME := WLR8100
|
|
IMAGE_SIZE := 15424k
|
|
MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,15424k(firmware),256k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += wlr8100
|
|
|
|
define Device/wpj-16m
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
MTDPARTS := spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
|
|
IMAGE_SIZE := 16128k
|
|
endef
|
|
|
|
define Device/wpj342
|
|
$(Device/wpj-16m)
|
|
DEVICE_TITLE := Compex WPJ342 (16MB flash)
|
|
BOARDNAME := WPJ342
|
|
endef
|
|
TARGET_DEVICES += wpj342
|
|
|
|
define Device/wpj344
|
|
$(Device/wpj-16m)
|
|
DEVICE_TITLE := Compex WPJ344 (16MB flash)
|
|
BOARDNAME := WPJ344
|
|
SUPPORTED_DEVICES := wpj344
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += wpj344
|
|
|
|
define Device/wpj531
|
|
$(Device/wpj-16m)
|
|
DEVICE_TITLE := Compex WPJ531 (16MB flash)
|
|
BOARDNAME := WPJ531
|
|
endef
|
|
TARGET_DEVICES += wpj531
|
|
|
|
define Device/wpj558
|
|
$(Device/wpj-16m)
|
|
DEVICE_TITLE := Compex WPJ558 (16MB flash)
|
|
BOARDNAME := WPJ558
|
|
SUPPORTED_DEVICES := wpj558
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += wpj558
|
|
|
|
define Device/wpj563
|
|
$(Device/wpj-16m)
|
|
DEVICE_TITLE := Compex WPJ563 (16MB flash)
|
|
BOARDNAME := WPJ563
|
|
endef
|
|
TARGET_DEVICES += wpj563
|
|
|
|
define Device/wrtnode2q
|
|
DEVICE_TITLE := WRTnode2Q
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
|
|
BOARDNAME := WRTNODE2Q
|
|
IMAGE_SIZE := 16064k
|
|
MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,16064k(firmware),16384k@0x0(fullflash)
|
|
endef
|
|
TARGET_DEVICES += wrtnode2q
|
|
|
|
define Device/zbt-we1526
|
|
DEVICE_TITLE := Zbtlink ZBT-WE1526
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
BOARDNAME := ZBT-WE1526
|
|
IMAGE_SIZE := 16000k
|
|
KERNEL_SIZE := 1472k
|
|
ROOTFS_SIZE := 14528k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += zbt-we1526
|
|
|
|
define Device/fritz300e
|
|
DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
|
|
DEVICE_PACKAGES := fritz-tffs rssileds -swconfig -uboot-envtools
|
|
BOARDNAME := FRITZ300E
|
|
SUPPORTED_DEVICES := fritz300e
|
|
IMAGE_SIZE := 15232k
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | eva-image
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
|
|
append-squashfs-fakeroot-be | pad-to 256 | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += fritz300e
|