openwrtv3/target/linux/sunxi/patches-3.13/161-sunxi-ahci-add-driver.patch

From 22345cc059de4a6ea1dc7657dd6ad86ca16a8814 Mon Sep 17 00:00:00 2001
From: Oliver Schinagl <oliver@schinagl.nl>
Date: Tue, 3 Dec 2013 12:07:01 +0100
Subject: [PATCH] ARM: sunxi: Add ahci-sunxi driver for the Allwinner SUNXi
 SoCs sata

This patch adds support for the ahci sata controler found on Allwinner A10
and A20 SoCs.

Orignally written by Olliver Schinagl using the approach of having a platform
device which probe method creates a new child platform device which gets
driven by ahci_platform.c, as done by ahci_imx.c .

Given that almost all functionality already is shared through libahci /
ata-core, and that ahci_platform.c cannot cleanly handle somewhat more complex
platform specific ahci cases, such as the sunxi case, it was refactored into
a stand-alone platform driver by Hans de Goede.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 .../devicetree/bindings/ata/ahci-sunxi.txt         |  24 ++
 drivers/ata/Kconfig                                |   9 +
 drivers/ata/Makefile                               |   1 +
 drivers/ata/ahci_sunxi.c                           | 349 +++++++++++++++++++++
 4 files changed, 383 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/ahci-sunxi.txt
 create mode 100644 drivers/ata/ahci_sunxi.c

--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-sunxi.txt
@@ -0,0 +1,24 @@
+Allwinner SUNXI AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible	: compatible list, contains "allwinner,sun4i-a10-ahci"
+- reg		: <registers mapping>
+- interrupts	: <interrupt mapping for AHCI IRQ>
+- clocks	: clocks for ACHI
+- clock-names	: clock names for AHCI
+
+Optional properties:
+- pwr-supply	: regulator to control the power supply GPIO
+
+Example:
+	ahci@01c18000 {
+		compatible = "allwinner,sun4i-a10-ahci";
+		reg = <0x01c18000 0x1000>;
+		interrupts = <0 56 1>;
+		clocks = <&ahb_gates 25>, <&pll6 0>;
+		clock-names = "ahb_sata", "pll6_sata";
+		pwr-supply = <&reg_ahci_5v>;
+	};
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -106,6 +106,15 @@ config AHCI_IMX
 
 	  If unsure, say N.
 
+config AHCI_SUNXI
+	tristate "Allwinner sunxi AHCI SATA support"
+	depends on ARCH_SUNXI
+	help
+	  This option enables support for the Allwinner sunxi SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
 config SATA_FSL
 	tristate "Freescale 3.0Gbps SATA support"
 	depends on FSL_SOC
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
 obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
 obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
 obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o
+obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o
 
 # SFF w/ custom DMA
 obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
--- /dev/null
+++ b/drivers/ata/ahci_sunxi.c
@@ -0,0 +1,349 @@
+/*
+ * Allwinner sunxi AHCI SATA platform driver
+ * Copyright 2013 Olliver Schinagl <oliver@schinagl.nl>
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
+ * Based on code from Allwinner Technology Co., Ltd. <www.allwinnertech.com>,
+ * Daniel Wang <danielwang@allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include "ahci.h"
+
+#define AHCI_BISTAFR 0x00a0
+#define AHCI_BISTCR 0x00a4
+#define AHCI_BISTFCTR 0x00a8
+#define AHCI_BISTSR 0x00ac
+#define AHCI_BISTDECR 0x00b0
+#define AHCI_DIAGNR0 0x00b4
+#define AHCI_DIAGNR1 0x00b8
+#define AHCI_OOBR 0x00bc
+#define AHCI_PHYCS0R 0x00c0
+#define AHCI_PHYCS1R 0x00c4
+#define AHCI_PHYCS2R 0x00c8
+#define AHCI_TIMER1MS 0x00e0
+#define AHCI_GPARAM1R 0x00e8
+#define AHCI_GPARAM2R 0x00ec
+#define AHCI_PPARAMR 0x00f0
+#define AHCI_TESTR 0x00f4
+#define AHCI_VERSIONR 0x00f8
+#define AHCI_IDR 0x00fc
+#define AHCI_RWCR 0x00fc
+#define AHCI_P0DMACR 0x0170
+#define AHCI_P0PHYCR 0x0178
+#define AHCI_P0PHYSR 0x017c
+
+struct sunxi_ahci {
+	struct ahci_host_priv hpriv;
+	struct regulator *pwr;
+	struct clk *sata_clk;
+	struct clk *ahb_clk;
+};
+
+static void sunxi_clrbits(void __iomem *reg, u32 clr_val)
+{
+	u32 reg_val;
+
+	reg_val = readl(reg);
+	reg_val &= ~(clr_val);
+	writel(reg_val, reg);
+}
+
+static void sunxi_setbits(void __iomem *reg, u32 set_val)
+{
+	u32 reg_val;
+
+	reg_val = readl(reg);
+	reg_val |= set_val;
+	writel(reg_val, reg);
+}
+
+static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val)
+{
+	u32 reg_val;
+
+	reg_val = readl(reg);
+	reg_val &= ~(clr_val);
+	reg_val |= set_val;
+	writel(reg_val, reg);
+}
+
+static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift)
+{
+	return (readl(reg) >> shift) & mask;
+}
+
+static int sunxi_ahci_phy_init(struct device *dev, void __iomem *reg_base)
+{
+	u32 reg_val;
+	int timeout;
+
+	/* This magic is from the original code */
+	writel(0, reg_base + AHCI_RWCR);
+	mdelay(5);
+
+	sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
+	sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
+			 (0x7 << 24),
+			 (0x5 << 24) | BIT(23) | BIT(18));
+	sunxi_clrsetbits(reg_base + AHCI_PHYCS1R,
+			 (0x3 << 16) | (0x1f << 8) | (0x3 << 6),
+			 (0x2 << 16) | (0x6 << 8) | (0x2 << 6));
+	sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15));
+	sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19));
+	sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
+			 (0x7 << 20), (0x3 << 20));
+	sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
+			 (0x1f << 5), (0x19 << 5));
+	mdelay(5);
+
+	sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
+
+	timeout = 0x100000;
+	do {
+		reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28);
+	} while (--timeout && (reg_val != 0x2));
+	if (!timeout) {
+		dev_err(dev, "PHY power up failed.\n");
+		return -EIO;
+	}
+
+	sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24));
+
+	timeout = 0x100000;
+	do {
+		reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24);
+	} while (--timeout && reg_val);
+	if (!timeout) {
+		dev_err(dev, "PHY calibration failed.\n");
+		return -EIO;
+	}
+	mdelay(15);
+
+	writel(0x7, reg_base + AHCI_RWCR);
+
+	return 0;
+}
+
+void sunxi_ahci_pre_start_engine(struct ata_port *ap)
+{
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+
+	/* Setup DMA before DMA start */
+	sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400);
+}
+
+static int sunxi_ahci_enable_clks(struct sunxi_ahci *ahci)
+{
+	int ret;
+
+	ret = clk_prepare_enable(ahci->sata_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(ahci->ahb_clk);
+	if (ret)
+		clk_disable_unprepare(ahci->sata_clk);
+
+	return ret;
+}
+
+static void sunxi_ahci_disable_clks(struct sunxi_ahci *ahci)
+{
+	clk_disable_unprepare(ahci->ahb_clk);
+	clk_disable_unprepare(ahci->sata_clk);
+}
+
+static void sunxi_ahci_host_stop(struct ata_host *host)
+{
+	struct ahci_host_priv *hpriv = host->private_data;
+	struct sunxi_ahci *ahci = hpriv->plat_data;
+
+	if (!IS_ERR(ahci->pwr))
+		regulator_disable(ahci->pwr);
+
+	sunxi_ahci_disable_clks(ahci);
+}
+
+static struct ata_port_operations sunxi_ahci_platform_ops = {
+	.inherits	= &ahci_ops,
+	.host_stop	= sunxi_ahci_host_stop,
+};
+
+static const struct ata_port_info sunxiahci_port_info = {
+	AHCI_HFLAGS(AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
+			  AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ),
+	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &sunxi_ahci_platform_ops,
+};
+
+static struct scsi_host_template sunxi_ahci_platform_sht = {
+	AHCI_SHT("sunxi_ahci"),
+};
+
+static int sunxi_ahci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct ata_port_info *ppi[] = { &sunxiahci_port_info, NULL };
+	struct sunxi_ahci *ahci;
+	struct ata_host *host;
+	int ret;
+
+	ahci = devm_kzalloc(&pdev->dev, sizeof(*ahci), GFP_KERNEL);
+	if (!ahci)
+		return -ENOMEM;
+
+	ahci->pwr = devm_regulator_get_optional(dev, "pwr");
+	if (IS_ERR(ahci->pwr) && PTR_ERR(ahci->pwr) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	host = ata_host_alloc_pinfo(dev, ppi, 1);
+	if (!host)
+		return -ENOMEM;
+
+	host->private_data = &ahci->hpriv;
+	host->flags |= ATA_HOST_PARALLEL_SCAN;
+
+	ahci->hpriv.flags = (unsigned long)ppi[0]->private_data;
+	ahci->hpriv.plat_data = ahci;
+	ahci->hpriv.pre_start_engine = sunxi_ahci_pre_start_engine;
+	ahci->hpriv.mmio = devm_ioremap_resource(dev,
+			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(ahci->hpriv.mmio))
+		return PTR_ERR(ahci->hpriv.mmio);
+
+	ahci->ahb_clk = devm_clk_get(&pdev->dev, "ahb_sata");
+	if (IS_ERR(ahci->ahb_clk))
+		return PTR_ERR(ahci->ahb_clk);
+
+	ahci->sata_clk = devm_clk_get(&pdev->dev, "pll6_sata");
+	if (IS_ERR(ahci->sata_clk))
+		return PTR_ERR(ahci->sata_clk);
+
+	ret = sunxi_ahci_enable_clks(ahci);
+	if (ret)
+		return ret;
+
+	if (!IS_ERR(ahci->pwr)) {
+		ret = regulator_enable(ahci->pwr);
+		if (ret) {
+			sunxi_ahci_disable_clks(ahci);
+			return ret;
+		}
+	}
+
+	ret = sunxi_ahci_phy_init(dev, ahci->hpriv.mmio);
+	if (ret) {
+		sunxi_ahci_host_stop(host);
+		return ret;
+	}
+
+	ahci_save_initial_config(dev, &ahci->hpriv, 0, 0);
+
+	ret = ahci_reset_controller(host);
+	if (ret) {
+		sunxi_ahci_host_stop(host);
+		return ret;
+	}
+
+	ahci_init_controller(host);
+	ahci_print_info(host, "sunxi");
+
+	ret = ata_host_activate(host, platform_get_irq(pdev, 0),
+				ahci_interrupt, 0, &sunxi_ahci_platform_sht);
+	if (ret)
+		sunxi_ahci_host_stop(host);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sunxi_ahci_susp(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	struct sunxi_ahci *ahci = hpriv->plat_data;
+	int ret;
+
+	/*
+	 * AHCI spec rev1.1 section 8.3.3:
+	 * Software must disable interrupts prior to requesting a
+	 * transition of the HBA to D3 state.
+	 */
+	sunxi_clrbits(hpriv->mmio + HOST_CTL, HOST_IRQ_EN);
+
+	ret = ata_host_suspend(host, PMSG_SUSPEND);
+	if (ret)
+		return ret;
+
+	sunxi_ahci_disable_clks(ahci);
+
+	return 0;
+}
+
+static int sunxi_ahci_resume(struct device *dev)
+{
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	struct sunxi_ahci *ahci = hpriv->plat_data;
+	int ret;
+
+	ret = sunxi_ahci_enable_clks(ahci);
+	if (ret)
+		return ret;
+
+	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+		ret = ahci_reset_controller(host);
+		if (ret)
+			return ret;
+
+		ahci_init_controller(host);
+	}
+
+	ata_host_resume(host);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sunxi_ahci_pmo, sunxi_ahci_susp, sunxi_ahci_resume);
+
+static const struct of_device_id sunxi_ahci_of_match[] = {
+	{ .compatible = "allwinner,sun4i-a10-ahci" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sunxi_ahci_of_match);
+
+static struct platform_driver sunxi_ahci_driver = {
+	.probe = sunxi_ahci_probe,
+	.remove = ata_platform_remove_one,
+	.driver = {
+		.name = "sunxi-ahci",
+		.owner = THIS_MODULE,
+		.of_match_table = sunxi_ahci_of_match,
+		.pm = &sunxi_ahci_pmo,
+	},
+};
+module_platform_driver(sunxi_ahci_driver);
+
+MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA platform driver");
+MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>");
+MODULE_LICENSE("GPL");