openwrtv3/target/linux/ramips/dts/DIR-810L.dts
Mathias Kresin 2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00

136 lines
2 KiB
Text

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
model = "D-Link DIR-810L";
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <BTN_0>;
};
wps {
label = "wps";
gpios = <&gpio0 2 1>;
linux,code = <BTN_0>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "dir-810l:green:power";
gpios = <&gpio0 9 0>;
};
wan {
label = "dir-810l:orange:wan";
gpios = <&gpio0 12 0>;
};
status {
label = "dir-810l:orange:power";
gpios = <&gpio0 13 0>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
factory5g: partition@50000 {
label = "factory5g";
reg = <0x50000 0x10000>;
read-only;
};
partition@60000 {
label = "Wolf_Config";
reg = <0x60000 0x10000>;
read-only;
};
partition@70000 {
label = "MyDlink";
reg = <0x70000 0x80000>;
read-only;
};
partition@e0000 {
label = "Jffs2";
reg = <0xe0000 0x80000>;
read-only;
};
partition@170000 {
label = "firmware";
reg = <0x170000 0x690000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
mediatek,portmap = "llllw";
};
&gsw {
mediatek,port4 = "ephy";
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
};
&pcie {
status = "okay";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};