openwrtv3/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
Mathias Kresin 2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00

264 lines
5.4 KiB
Text

/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "BTHOMEHUBV2B - BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
aliases {
led-boot = &power_orange;
led-failsafe = &power_red;
led-running = &power_blue;
led-internet = &broadband_blue;
led-wifi = &wireless_blue;
};
memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 { /* NOR Flash: Spansion S29AL004D 512KB */
compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
lantiq,cs = <0>;
bank-width = <2>;
reg = <0 0x0 0x80000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>; /* 256KB */
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x10000>; /* 64KB */
};
partition@50000 {
label = "rg_conf_1";
reg = <0x50000 0x10000>;
};
partition@60000 {
label = "rg_conf_2";
reg = <0x60000 0x10000>;
};
partition@70000 {
label = "rg_conf_factory";
reg = <0x70000 0x10000>;
};
};
};
nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
compatible = "gen_nand", "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <1 0x0 0x2000000 >;
#address-cells = <1>;
#size-cells = <1>;
req-mask = <0x1>; /* PCI request lines to mask during NAND access */
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
ath9k_cal: partition@0 {
label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
reg = <0x00000 0x4000>;
read-only;
};
partition@4000 {
label = "kernel";
reg = <0x4000 0x200000>;
};
partition@164000 {
label = "ubi";
reg = <0x204000 0x1DFC000>;
};
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x0000>;
ath,mac-increment = <1>;
ath,pci-slot = <14>;
ath,eep-endian;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain = <0>;
};
btn_in {
lantiq,pins = "io2", "io15", "io22";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
};
};
etop@E180000 {
phy-mode = "rmii";
};
ifxhcd@E101000 {
status = "okay";
};
gpios: stp@E100BB0 {
status = "okay";
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
findhandset {
label = "findhandset";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
wps {
label = "wps";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
upgrading-orange {
label = "bthomehubv2b:orange:upgrading";
gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
};
phone-orange {
label = "bthomehubv2b:orange:phone";
gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
};
phone-blue {
label = "bthomehubv2b:blue:phone";
gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
};
wireless-orange {
label = "bthomehubv2b:orange:wireless";
gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
};
wireless_blue: wireless-blue {
label = "bthomehubv2b:blue:wireless";
gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
};
broadband-red {
label = "bthomehubv2b:red:broadband";
gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
};
broadband-orange {
label = "bthomehubv2b:orange:broadband";
gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
};
broadband_blue: broadband-blue {
label = "bthomehubv2b:blue:broadband";
gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
};
power_red: power-red {
label = "bthomehubv2b:red:power";
gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
};
power_orange: power-orange {
label = "bthomehubv2b:orange:power";
gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power_blue: power-blue {
label = "bthomehubv2b:blue:power";
gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
};
};
};