openwrtv3/target/linux/brcm2708/patches-4.4/0156-Aux-SPI-1-2-implementation.patch
Álvaro Fernández Rojas 3fc661a98c brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y
Also alphabetically order sound-soc kernel packages.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-08 21:23:21 +02:00

700 lines
20 KiB
Diff

From 67fd5e9a91ad7abeb3ebfa30753c375e0953b52e Mon Sep 17 00:00:00 2001
From: Fraser <github@frasersdev.net>
Date: Tue, 23 Feb 2016 10:04:37 +1100
Subject: [PATCH 156/381] Aux SPI 1&2 implementation
Adds aux spi 1 & 2 devices to compatible raspberry PIs.
* Minor config of the driver build environment to ensure they get built
for CONFIG_ARCH_BCM2708 & CONFIG_ARCH_BCM2709 devices.
* Adds the aux spi driver into the defconfigs as a module.
* Adds the auxiliary and spi1/2 devices into the device tree in a
disabled state
* Provides decide tree overlays which enables the devices and gives
users a degree of control over how they are setup.
---
arch/arm/boot/dts/bcm2708_common.dtsi | 34 ++++++++-
arch/arm/boot/dts/overlays/Makefile | 6 ++
arch/arm/boot/dts/overlays/README | 99 +++++++++++++++++++++++++
arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts | 57 ++++++++++++++
arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts | 69 +++++++++++++++++
arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts | 81 ++++++++++++++++++++
arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts | 57 ++++++++++++++
arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts | 69 +++++++++++++++++
arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts | 81 ++++++++++++++++++++
arch/arm/configs/bcm2709_defconfig | 1 +
arch/arm/configs/bcmrpi_defconfig | 1 +
drivers/clk/bcm/Makefile | 2 +-
drivers/spi/Kconfig | 2 +-
13 files changed, 556 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts
--- a/arch/arm/boot/dts/bcm2708_common.dtsi
+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
@@ -1,3 +1,4 @@
+#include <dt-bindings/clock/bcm2835-aux.h>
#include "skeleton.dtsi"
/ {
@@ -5,6 +6,7 @@
aliases {
audio = &audio;
+ aux = &aux;
sound = &sound;
soc = &soc;
dma = &dma;
@@ -19,6 +21,8 @@
spi0 = &spi0;
i2c0 = &i2c0;
uart1 = &uart1;
+ spi1 = &spi1;
+ spi2 = &spi2;
mmc = &mmc;
i2c1 = &i2c1;
i2c2 = &i2c2;
@@ -186,6 +190,14 @@
status = "disabled";
};
+ aux: aux@0x7e215004 {
+ compatible = "brcm,bcm2835-aux";
+ #clock-cells = <1>;
+ reg = <0x7e215000 0x8>;
+ clocks = <&clk_core>;
+ status = "disabled";
+ };
+
uart1: uart@7e215040 {
compatible = "brcm,bcm2835-aux-uart", "ns16550";
reg = <0x7e215040 0x40>;
@@ -194,7 +206,27 @@
reg-shift = <2>;
no-loopback-test;
status = "disabled";
- };
+ };
+
+ spi1: spi@7e215080 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e215080 0x40>, <0x7e215000 0x8>;
+ interrupts = <1 29>;
+ clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@7e2150C0 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e2150C0 0x40>, <0x7e215000 0x8>;
+ interrupts = <1 29>;
+ clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
mmc: mmc@7e300000 {
compatible = "brcm,bcm2835-mmc";
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -57,6 +57,12 @@ dtb-$(RPI_DT_OVERLAYS) += sdtweak-overla
dtb-$(RPI_DT_OVERLAYS) += smi-dev-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += smi-nand-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += smi-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi1-1cs-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi1-2cs-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi1-3cs-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi2-1cs-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi2-2cs-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += spi2-3cs-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += spi-gpio35-39-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += tinylcd35-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += uart1-overlay.dtb
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -713,6 +713,105 @@ Load: dtoverlay=spi-gpio35-39
Params: <None>
+Name: spi1-1cs
+Info: Enables spi1 with a single chip select (CS) line and associated spidev
+ dev node. The gpio pin number for the CS line and spidev device node
+ creation are configurable.
+ N.B.: spi1 is only accessible on devices with a 40pin header, eg:
+ A+, B+, Zero and PI2 B; as well as the Compute Module.
+Load: dtoverlay=spi1-1cs,<param>=<val>
+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
+ cs0_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev1.0 (default
+ is 'okay' or enabled).
+
+
+Name: spi1-2cs
+Info: Enables spi1 with two chip select (CS) lines and associated spidev
+ dev nodes. The gpio pin numbers for the CS lines and spidev device node
+ creation are configurable.
+ N.B.: spi1 is only accessible on devices with a 40pin header, eg:
+ A+, B+, Zero and PI2 B; as well as the Compute Module.
+Load: dtoverlay=spi1-2cs,<param>=<val>
+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
+ cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1).
+ cs0_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev1.0 (default
+ is 'okay' or enabled).
+ cs1_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev1.1 (default
+ is 'okay' or enabled).
+
+
+Name: spi1-3cs
+Info: Enables spi1 with three chip select (CS) lines and associated spidev
+ dev nodes. The gpio pin numbers for the CS lines and spidev device node
+ creation are configurable.
+ N.B.: spi1 is only accessible on devices with a 40pin header, eg:
+ A+, B+, Zero and PI2 B; as well as the Compute Module.
+Load: dtoverlay=spi1-3cs,<param>=<val>
+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0).
+ cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1).
+ cs2_pin GPIO pin for CS2 (default 16 - BCM SPI1_CE2).
+ cs0_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev1.0 (default
+ is 'okay' or enabled).
+ cs1_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev1.1 (default
+ is 'okay' or enabled).
+ cs2_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev1.2 (default
+ is 'okay' or enabled).
+
+
+Name: spi2-1cs
+Info: Enables spi2 with a single chip select (CS) line and associated spidev
+ dev node. The gpio pin number for the CS line and spidev device node
+ creation are configurable.
+ N.B.: spi2 is only accessible with the Compute Module.
+Load: dtoverlay=spi2-1cs,<param>=<val>
+Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
+ cs0_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev2.0 (default
+ is 'okay' or enabled).
+
+
+Name: spi2-2cs
+Info: Enables spi2 with two chip select (CS) lines and associated spidev
+ dev nodes. The gpio pin numbers for the CS lines and spidev device node
+ creation are configurable.
+ N.B.: spi2 is only accessible with the Compute Module.
+Load: dtoverlay=spi2-2cs,<param>=<val>
+Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
+ cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1).
+ cs0_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev2.0 (default
+ is 'okay' or enabled).
+ cs1_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev2.1 (default
+ is 'okay' or enabled).
+
+
+Name: spi2-3cs
+Info: Enables spi2 with three chip select (CS) lines and associated spidev
+ dev nodes. The gpio pin numbers for the CS lines and spidev device node
+ creation are configurable.
+ N.B.: spi2 is only accessible with the Compute Module.
+Load: dtoverlay=spi2-3cs,<param>=<val>
+Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
+ cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1).
+ cs2_pin GPIO pin for CS2 (default 45 - BCM SPI2_CE2).
+ cs0_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev2.0 (default
+ is 'okay' or enabled).
+ cs1_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev2.1 (default
+ is 'okay' or enabled).
+ cs2_spidev Set to 'disabled' to stop the creation of a
+ userspace device node /dev/spidev2.2 (default
+ is 'okay' or enabled).
+
+
Name: tinylcd35
Info: 3.5" Color TFT Display by www.tinylcd.com
Options: Touch, RTC, keypad
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts
@@ -0,0 +1,57 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+ fragment@0 {
+ target = <&gpio>;
+ __overlay__ {
+ spi1_pins: spi1_pins {
+ brcm,pins = <19 20 21>;
+ brcm,function = <3>; /* alt4 */
+ };
+
+ spi1_cs_pins: spi1_cs_pins {
+ brcm,pins = <18>;
+ brcm,function = <1>; /* output */
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&spi1>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>;
+ cs-gpios = <&gpio 18 1>;
+ status = "okay";
+
+ spidev1_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+ };
+ };
+
+ fragment@2 {
+ target = <&aux>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0",
+ <&frag1>,"cs-gpios:4";
+ cs0_spidev = <&spidev1_0>,"status";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts
@@ -0,0 +1,69 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+ fragment@0 {
+ target = <&gpio>;
+ __overlay__ {
+ spi1_pins: spi1_pins {
+ brcm,pins = <19 20 21>;
+ brcm,function = <3>; /* alt4 */
+ };
+
+ spi1_cs_pins: spi1_cs_pins {
+ brcm,pins = <18 17>;
+ brcm,function = <1>; /* output */
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&spi1>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>;
+ cs-gpios = <&gpio 18 1>, <&gpio 17 1>;
+ status = "okay";
+
+ spidev1_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+
+ spidev1_1: spidev@1 {
+ compatible = "spidev";
+ reg = <1>; /* CE1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+ };
+ };
+
+ fragment@2 {
+ target = <&aux>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0",
+ <&frag1>,"cs-gpios:4";
+ cs1_pin = <&spi1_cs_pins>,"brcm,pins:4",
+ <&frag1>,"cs-gpios:16";
+ cs0_spidev = <&spidev1_0>,"status";
+ cs1_spidev = <&spidev1_1>,"status";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts
@@ -0,0 +1,81 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+ fragment@0 {
+ target = <&gpio>;
+ __overlay__ {
+ spi1_pins: spi1_pins {
+ brcm,pins = <19 20 21>;
+ brcm,function = <3>; /* alt4 */
+ };
+
+ spi1_cs_pins: spi1_cs_pins {
+ brcm,pins = <18 17 16>;
+ brcm,function = <1>; /* output */
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&spi1>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>;
+ cs-gpios = <&gpio 18 1>, <&gpio 17 1>, <&gpio 16 1>;
+ status = "okay";
+
+ spidev1_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+
+ spidev1_1: spidev@1 {
+ compatible = "spidev";
+ reg = <1>; /* CE1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+
+ spidev1_2: spidev@2 {
+ compatible = "spidev";
+ reg = <2>; /* CE2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+ };
+ };
+
+ fragment@2 {
+ target = <&aux>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0",
+ <&frag1>,"cs-gpios:4";
+ cs1_pin = <&spi1_cs_pins>,"brcm,pins:4",
+ <&frag1>,"cs-gpios:16";
+ cs2_pin = <&spi1_cs_pins>,"brcm,pins:8",
+ <&frag1>,"cs-gpios:28";
+ cs0_spidev = <&spidev1_0>,"status";
+ cs1_spidev = <&spidev1_1>,"status";
+ cs2_spidev = <&spidev1_2>,"status";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts
@@ -0,0 +1,57 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+ fragment@0 {
+ target = <&gpio>;
+ __overlay__ {
+ spi2_pins: spi2_pins {
+ brcm,pins = <40 41 42>;
+ brcm,function = <3>; /* alt4 */
+ };
+
+ spi2_cs_pins: spi2_cs_pins {
+ brcm,pins = <43>;
+ brcm,function = <1>; /* output */
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&spi2>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins &spi2_cs_pins>;
+ cs-gpios = <&gpio 43 1>;
+ status = "okay";
+
+ spidev2_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+ };
+ };
+
+ fragment@2 {
+ target = <&aux>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0",
+ <&frag1>,"cs-gpios:4";
+ cs0_spidev = <&spidev2_0>,"status";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts
@@ -0,0 +1,69 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+ fragment@0 {
+ target = <&gpio>;
+ __overlay__ {
+ spi2_pins: spi2_pins {
+ brcm,pins = <40 41 42>;
+ brcm,function = <3>; /* alt4 */
+ };
+
+ spi2_cs_pins: spi2_cs_pins {
+ brcm,pins = <43 44>;
+ brcm,function = <1>; /* output */
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&spi2>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins &spi2_cs_pins>;
+ cs-gpios = <&gpio 43 1>, <&gpio 44 1>;
+ status = "okay";
+
+ spidev2_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+
+ spidev2_1: spidev@1 {
+ compatible = "spidev";
+ reg = <1>; /* CE1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+ };
+ };
+
+ fragment@2 {
+ target = <&aux>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0",
+ <&frag1>,"cs-gpios:4";
+ cs1_pin = <&spi2_cs_pins>,"brcm,pins:4",
+ <&frag1>,"cs-gpios:16";
+ cs0_spidev = <&spidev2_0>,"status";
+ cs1_spidev = <&spidev2_1>,"status";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts
@@ -0,0 +1,81 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+ fragment@0 {
+ target = <&gpio>;
+ __overlay__ {
+ spi2_pins: spi2_pins {
+ brcm,pins = <40 41 42>;
+ brcm,function = <3>; /* alt4 */
+ };
+
+ spi2_cs_pins: spi2_cs_pins {
+ brcm,pins = <43 44 45>;
+ brcm,function = <1>; /* output */
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&spi2>;
+ frag1: __overlay__ {
+ /* needed to avoid dtc warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins &spi2_cs_pins>;
+ cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>;
+ status = "okay";
+
+ spidev2_0: spidev@0 {
+ compatible = "spidev";
+ reg = <0>; /* CE0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+
+ spidev2_1: spidev@1 {
+ compatible = "spidev";
+ reg = <1>; /* CE1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+
+ spidev2_2: spidev@2 {
+ compatible = "spidev";
+ reg = <2>; /* CE2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <500000>;
+ status = "okay";
+ };
+ };
+ };
+
+ fragment@2 {
+ target = <&aux>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0",
+ <&frag1>,"cs-gpios:4";
+ cs1_pin = <&spi2_cs_pins>,"brcm,pins:4",
+ <&frag1>,"cs-gpios:16";
+ cs2_pin = <&spi2_cs_pins>,"brcm,pins:8",
+ <&frag1>,"cs-gpios:28";
+ cs0_spidev = <&spidev2_0>,"status";
+ cs1_spidev = <&spidev2_1>,"status";
+ cs2_spidev = <&spidev2_2>,"status";
+ };
+};
--- a/arch/arm/configs/bcm2709_defconfig
+++ b/arch/arm/configs/bcm2709_defconfig
@@ -601,6 +601,7 @@ CONFIG_I2C_BCM2708=m
CONFIG_I2C_GPIO=m
CONFIG_SPI=y
CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
CONFIG_SPI_SPIDEV=y
CONFIG_PPS=m
CONFIG_PPS_CLIENT_LDISC=m
--- a/arch/arm/configs/bcmrpi_defconfig
+++ b/arch/arm/configs/bcmrpi_defconfig
@@ -593,6 +593,7 @@ CONFIG_I2C_BCM2708=m
CONFIG_I2C_GPIO=m
CONFIG_SPI=y
CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
CONFIG_SPI_SPIDEV=y
CONFIG_PPS=m
CONFIG_PPS_CLIENT_LDISC=m
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -4,7 +4,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
obj-$(CONFIG_ARCH_BCM2835)$(CONFIG_ARCH_BCM2708)$(CONFIG_ARCH_BCM2709) += clk-bcm2835.o
-obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o
+obj-$(CONFIG_ARCH_BCM2835)$(CONFIG_ARCH_BCM2708)$(CONFIG_ARCH_BCM2709) += clk-bcm2835-aux.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns2.o
obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -90,7 +90,7 @@ config SPI_BCM2835
config SPI_BCM2835AUX
tristate "BCM2835 SPI auxiliary controller"
- depends on ARCH_BCM2835 || COMPILE_TEST
+ depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709 || COMPILE_TEST
depends on GPIOLIB
help
This selects a driver for the Broadcom BCM2835 SPI aux master.