No description
Find a file
Florian Fainelli 2a888f2e23 Update hostapd to 0.6.4
SVN-Revision: 12298
2008-08-13 19:32:40 +00:00
docs Add 802.1x client configuration support and corresponding documentation (#2069) 2008-08-11 21:38:50 +00:00
include Package ip6t_limit and ip6t_frag for 2.4 kernels (#3760) 2008-08-11 06:38:48 +00:00
package Update hostapd to 0.6.4 2008-08-13 19:32:40 +00:00
scripts scripts/feeds calls 'make' irrespective of the platform it is running on. The attached patch changes the code to use gmake if available (which should cover non-linux platforms, and is the same logic used to adapt other programs in include/host.mk) (#3867) 2008-08-08 21:30:08 +00:00
target fix gpio number of the reset button Compex WP54 boards 2008-08-13 16:15:45 +00:00
toolchain storm is ARMv4, not ARMv4T (thx, SeG) 2008-07-31 16:51:43 +00:00
tools Invert logic, first search for find as most people will build under Linux 2008-08-08 21:48:15 +00:00
.gitignore add missing gitignore change for build environments 2008-08-06 14:34:18 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in adds missing patch for native toolchain 2008-06-10 07:18:41 +00:00
feeds.conf update luci feed url to use http due to certificate issues 2008-08-07 13:26:10 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile make package prereq checks behave more like build prereq checks (first check all, then fail if necessary), also make them less verbose 2008-08-04 23:15:17 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
rules.mk add a variable that contains the proper architecture-dependent -fPIC/-fpic cflag for building shared libraries 2008-08-06 22:10:20 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org