openwrtv3/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3320-v2.c
John Crispin 0dbced8a48 ar71xx: add TP-LINK TL-WDR3320 v2 support
This patch adds support for TP-LINK TL-WDR3320 v2.

This router uses a chinese version 2 firmware header,.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 46934
2015-09-14 20:12:16 +00:00

146 lines
3.8 KiB
C

/*
* TP-LINK TL-WDR3320 v2 board support
*
* Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2015 Weijie Gao <hackpascal@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/pci.h>
#include <linux/phy.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define WDR3320_GPIO_LED_WLAN5G 12
#define WDR3320_GPIO_LED_SYSTEM 14
#define WDR3320_GPIO_LED_QSS 15
#define WDR3320_GPIO_LED_WAN 4
#define WDR3320_GPIO_LED_LAN1 18
#define WDR3320_GPIO_LED_LAN2 20
#define WDR3320_GPIO_LED_LAN3 21
#define WDR3320_GPIO_LED_LAN4 22
#define WDR3320_GPIO_BTN_RESET 16
#define WDR3320_KEYS_POLL_INTERVAL 20 /* msecs */
#define WDR3320_KEYS_DEBOUNCE_INTERVAL (3 * WDR3320_KEYS_POLL_INTERVAL)
#define WDR3320_WMAC_CALDATA_OFFSET 0x1000
#define WDR3320_PCIE_CALDATA_OFFSET 0x5000
static const char *wdr3320_part_probes[] = {
"tp-link",
NULL,
};
static struct flash_platform_data wdr3320_flash_data = {
.part_probes = wdr3320_part_probes,
};
static struct gpio_led wdr3320_leds_gpio[] __initdata = {
{
.name = "tp-link:green:qss",
.gpio = WDR3320_GPIO_LED_QSS,
.active_low = 1,
},
{
.name = "tp-link:green:system",
.gpio = WDR3320_GPIO_LED_SYSTEM,
.active_low = 1,
},
{
.name = "tp-link:green:wlan5g",
.gpio = WDR3320_GPIO_LED_WLAN5G,
.active_low = 1,
},
};
static struct gpio_keys_button wdr3320_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WDR3320_KEYS_DEBOUNCE_INTERVAL,
.gpio = WDR3320_GPIO_BTN_RESET,
.active_low = 1,
},
};
static void __init wdr3320_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
u8 tmpmac[ETH_ALEN];
ath79_register_m25p80(&wdr3320_flash_data);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr3320_leds_gpio),
wdr3320_leds_gpio);
ath79_register_gpio_keys_polled(-1, WDR3320_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wdr3320_gpio_keys),
wdr3320_gpio_keys);
ath79_init_mac(tmpmac, mac, 0);
ath79_register_wmac(art + WDR3320_WMAC_CALDATA_OFFSET, tmpmac);
ath79_init_mac(tmpmac, mac, -1);
ap9x_pci_setup_wmac_led_pin(0, 0);
ap91_pci_init(art + WDR3320_PCIE_CALDATA_OFFSET, tmpmac);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
ath79_register_mdio(1, 0x0);
/* LAN */
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
/* GMAC1 is connected to the internal switch */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_register_eth(1);
/* WAN */
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
/* GMAC0 is connected to the PHY4 of the internal switch */
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask = BIT(4);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(4);
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
ath79_register_eth(0);
ath79_register_usb();
ath79_gpio_output_select(WDR3320_GPIO_LED_LAN1,
AR934X_GPIO_OUT_LED_LINK0);
ath79_gpio_output_select(WDR3320_GPIO_LED_LAN2,
AR934X_GPIO_OUT_LED_LINK1);
ath79_gpio_output_select(WDR3320_GPIO_LED_LAN3,
AR934X_GPIO_OUT_LED_LINK2);
ath79_gpio_output_select(WDR3320_GPIO_LED_LAN4,
AR934X_GPIO_OUT_LED_LINK3);
ath79_gpio_output_select(WDR3320_GPIO_LED_WAN,
AR934X_GPIO_OUT_LED_LINK4);
}
MIPS_MACHINE(ATH79_MACH_TL_WDR3320_V2, "TL-WDR3320-v2",
"TP-LINK TL-WDR3320 v2",
wdr3320_setup);