openwrtv3/target/linux
Felix Fietkau 28d8972c25 ar71xx: fix 100/10mbps ethernet link issues on mynet range extender
The mynet range extender hardware is suffering from ethernet
link loss when booting with a recent openwrt image. This only
happens on 100mbps links, with 1Gbps speed the link was fine.

The cause of the problem is that the AR8035 PHY (aka F1E)
requires turning on and off the special TX delay setting
depending on the speed of the link.

The 10mbps mode only needed the proper pll value, which was
extracted from the vendor code.

Reported-by: Pascal Paradis
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

SVN-Revision: 45954
2015-06-14 17:41:01 +00:00
..
adm5120 adm5120: fix subtarget dependency for kmod-pata-rb153-cf 2015-05-28 09:06:28 +00:00
adm8668 adm8668: drop 3.14 2015-04-11 10:28:06 +00:00
ar7 ar7: fix imagebuilder 2015-05-28 13:45:33 +00:00
ar71xx ar71xx: fix 100/10mbps ethernet link issues on mynet range extender 2015-06-14 17:41:01 +00:00
arm64 arm64: use common image prefix 2015-05-27 14:57:38 +00:00
at91 at91: fix imagebuilder 2015-05-28 13:25:21 +00:00
ath25 ath25: set myself as maintainer 2015-03-13 03:02:34 +00:00
au1000 au1000: add a missing dependency to the pcmcia module 2015-06-01 06:03:52 +00:00
bcm53xx bcm53xx: update NVRAM driver to MIPS version from upstream-sfr 2015-06-10 20:34:32 +00:00
brcm47xx brcm47xx: backport BCM47XX patches (NVRAM & BCMA_HOST_PCI) 2015-06-10 19:52:07 +00:00
brcm63xx brcm63xx: fix A4001N image padding size 2015-06-11 12:10:43 +00:00
brcm2708 brcm2708: fix imagebuilder 2015-05-29 11:28:54 +00:00
cns3xxx cns3xxx: use common image prefix 2015-05-27 15:18:29 +00:00
gemini gemini: fix imagebuilder 2015-05-29 11:28:33 +00:00
generic b53: fix memory out of bounds access on 64 bit targets 2015-06-10 09:21:36 +00:00
imx6 kernel: update 3.18 to 3.18.14 2015-05-21 19:32:46 +00:00
ipq806x kernel: move a symbol from the ipq806x config to generic to prevent it from being nuked by make kernel_oldconfig 2015-06-07 07:32:35 +00:00
ixp4xx ixp4xx: use usb-*-pci where appropriate 2015-05-29 14:39:12 +00:00
kirkwood kirkwood: disable TSO on the ethernet device by default, fixes data corruption issues (#19735) 2015-05-27 14:56:13 +00:00
lantiq lantiq: Backport gpio-stp-xway to fix the highest bits of the PHY LEDs 2015-06-05 14:11:51 +00:00
malta malta: add default network configuration 2015-05-31 17:45:43 +00:00
mcs814x kernel: update 3.18 to 3.18.14 2015-05-21 19:32:46 +00:00
mpc85xx mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig 2015-05-25 21:15:37 +00:00
mvebu mvebu: make flashing more safe 2015-05-27 19:03:22 +00:00
mxs mxs: fix imagebuilder 2015-05-29 08:42:50 +00:00
netlogic netlogic: copy initramfs image to $(BIN_DIR) 2015-04-23 22:31:36 +00:00
octeon octeon: fix imagebuilder 2015-05-29 11:28:20 +00:00
omap omap: use common image prefix 2015-05-27 15:34:30 +00:00
omap24xx omap24xx: Add basic config for linux-4.0 2015-03-19 18:45:32 +00:00
orion kernel: disable INET_LRO by default 2015-04-28 13:31:08 +00:00
oxnas kernel: update 3.18 to 3.18.14 2015-05-21 19:32:46 +00:00
ppc40x ppc40x: upgrade to 3.18 2015-04-12 20:48:13 +00:00
ppc44x ppc44x: use the mtdsplit framework for the Taishan 2015-03-11 12:20:03 +00:00
pxa kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED 2015-03-06 07:56:34 +00:00
ramips ramips: fix Power LED handling for WHR-300HP2, WHR-600D, WHR-1166D 2015-06-08 12:51:13 +00:00
rb532 kernel: update 3.18 to 3.18.14 2015-05-21 19:32:46 +00:00
realview realview: use common image prefix 2015-05-27 15:34:38 +00:00
sunxi sunxi: correct default package selection, fixes imagebuilder 2015-05-29 13:55:26 +00:00
uml uml: remove linux 3.14 support 2015-03-28 13:20:52 +00:00
x86 x86/64: add e1000e to the default packages 2015-05-29 08:20:58 +00:00
xburst xburst: fix imagebuilder 2015-05-28 12:25:45 +00:00
Makefile