e7cd6f5d66
Specifications: * SoC: AR7242 (Virian 400MHz) * RAM: 64 MB DDR (W9751G6JB-25) * Flash: 16MB SPI flash (S25FL129PIF) * WiFi: AR9382 (2.4/5GHz) + 2x SE2595L * LAN: 1x1000M (PEF7071V) To install LEDE via EVA bootloader, a FTP connection need to be established to 192.168.178.1 within the first seconds after power on: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put lede-ar71xx-generic-fritz300e-squashfs-sysupgrade.bin mtd1 Signed-off-by: Mathias Kresin <dev@kresin.me>
132 lines
3.1 KiB
C
132 lines
3.1 KiB
C
/*
|
|
* AVM FRITZ!WLAN Repeater 300E board support
|
|
*
|
|
* Copyright (C) 2017 Mathias Kresin <dev@kresin.me>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "machtypes.h"
|
|
|
|
#define FRITZ300E_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define FRITZ300E_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ300E_KEYS_POLL_INTERVAL)
|
|
|
|
static struct mtd_partition fritz300e_flash_partitions[] = {
|
|
{
|
|
.name = "urloader",
|
|
.offset = 0,
|
|
.size = 0x0020000,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "firmware",
|
|
.offset = 0x0020000,
|
|
.size = 0x0ee0000,
|
|
}, {
|
|
.name = "tffs (1)",
|
|
.offset = 0x0f00000,
|
|
.size = 0x0080000,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}, {
|
|
.name = "tffs (2)",
|
|
.offset = 0x0f80000,
|
|
.size = 0x0080000,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
}
|
|
};
|
|
|
|
static struct flash_platform_data fritz300e_flash_data = {
|
|
.parts = fritz300e_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(fritz300e_flash_partitions),
|
|
};
|
|
|
|
static struct gpio_led fritz300e_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "fritz300e:green:power",
|
|
.gpio = 13,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "fritz300e:green:lan",
|
|
.gpio = 15,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "fritz300e:green:wlan",
|
|
.gpio = 16,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_led fritz300e_wmac_leds_gpio[] = {
|
|
{
|
|
.name = "fritz300e:green:rssi0",
|
|
.gpio = 10,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "fritz300e:green:rssi1",
|
|
.gpio = 4,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "fritz300e:green:rssi2",
|
|
.gpio = 6,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "fritz300e:green:rssi3",
|
|
.gpio = 7,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "fritz300e:green:rssi4",
|
|
.gpio = 5,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button fritz300e_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "wps",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = FRITZ300E_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = 12,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static void __init fritz300e_setup(void)
|
|
{
|
|
/* get the Lantiq PEF7071V phy out of reset */
|
|
gpio_request_one(11, GPIOF_OUT_INIT_HIGH, "phy reset");
|
|
|
|
ath79_register_m25p80(&fritz300e_flash_data);
|
|
|
|
ath79_register_mdio(0, ~(BIT(0)));
|
|
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.speed = SPEED_1000;
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
|
|
ath79_register_eth(0);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz300e_leds_gpio),
|
|
fritz300e_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, FRITZ300E_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(fritz300e_gpio_keys),
|
|
fritz300e_gpio_keys);
|
|
|
|
ap9x_pci_setup_wmac_leds(0, fritz300e_wmac_leds_gpio,
|
|
ARRAY_SIZE(fritz300e_wmac_leds_gpio));
|
|
ap91_pci_init_simple();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_FRITZ300E, "FRITZ300E",
|
|
"AVM FRITZ!WLAN Repeater 300E", fritz300e_setup);
|