openwrtv3/target/linux/ramips/base-files/etc/diag.sh
Wang JiaWei d48cc5e044 ramips: add support for HiWiFi HC5661A
HC5661A is almost the same as HC5661 but MT7628AN is used instead of MT7620A.

- MT7628AN
- 128 MiB DDR2 RAM (W971GG6KB-25)
- 16 MiB SPI NOR flash (W25Q128)
- SD slot (not work yet)
- 1+4 x 100M Ethernet
- 802.11 b/g/n Wi-Fi
- 3 x LED
- 1 x button
- UART pad on PCB (JP1: TX, RX, GND, 3.3V)

The factory flash layout seems different from HC5661.
"hwf_config" is renamed to "oem" and its size changes to 0x20000.
It is modified accordingly in the dts file.

0x000000000000-0x000000030000 : "u-boot"
0x000000030000-0x000000040000 : "hw_panic"
0x000000040000-0x000000050000 : "Factory"
0x000000050000-0x000000160000 : "kernel"
0x000000160000-0x000000fc0000 : "rootfs"
0x000000bb0000-0x000000fc0000 : "rootfs_data"
0x000000fc0000-0x000000fe0000 : "oem"
0x000000fe0000-0x000000ff0000 : "bdinfo"
0x000000ff0000-0x000001000000 : "backup"
0x000000050000-0x000000fc0000 : "firmware"

To install LEDE, enabled the "developer mode",
which will *void your warranty* and open the SSH server at port 1022.

sysupgrade -n -F lede-ramips-mt7628-hc5661a-squashfs-sysupgrade.bin

SD slot:
- Tried to add modules kmod-sdhci kmod-sdhci-mt7620, and corresponding dts block.
- It will block WAN + 3xLAN ports, only one LAN works.
- I'm not sure why, everything else works fine.

Signed-off-by: Wang JiaWei <buaawjw@gmail.com>
2017-02-27 11:39:31 +01:00

273 lines
3.8 KiB
Bash

#!/bin/sh
# Copyright (C) 2010-2013 OpenWrt.org
. /lib/functions/leds.sh
. /lib/ramips.sh
get_status_led() {
board=$(ramips_board_name)
case $board in
3g150b|\
3g300m|\
w150m)
status_led="$board:blue:ap"
;;
3g-6200n|\
ar670w|\
ar725w|\
asl26555|\
br-6425|\
br-6475nd|\
c50|\
dch-m225|\
dir-860l-b1|\
e1700|\
fonera20n|\
kn_rc|\
kn_rf|\
kng_rc|\
mzk-750dhp|\
mzk-dp150n|\
mzk-w300nh2|\
nbg-419n|\
nbg-419n2|\
pwh2004|\
vr500|\
wnce2001|\
wndr3700v5|\
x5|\
x8|\
xdxrn502j)
status_led="$board:green:power"
;;
3g-6200nl)
status_led="$board:green:internet"
;;
a5-v11|\
cs-qr10|\
d105|\
dcs-930l-b1|\
ex2700|\
hlk-rm04|\
jhr-n825r|\
mpr-a1|\
mpr-a2|\
mzk-ex750np|\
wn3000rpv3)
status_led="$board:red:power"
;;
ac1200pro|\
all0239-3g|\
dcs-930|\
dir-300-b1|\
dir-300-b7|\
dir-320-b1|\
dir-600-b1|\
dir-610-a1|\
dir-615-d|\
dir-615-h1|\
dir-620-a1|\
dir-620-d1|\
dwr-512-b|\
hpm|\
hw550-3g|\
mac1200rv2|\
miniembwifi|\
mofi3500-3gn|\
rut5xx|\
v11st-fe|\
vocore|\
wmr-300|\
zbt-wg2626|\
zbt-wg3526)
status_led="$board:green:status"
;;
ai-br100|\
ht-tm02)
status_led="$board:blue:wlan"
;;
atp-52b|\
ip2202)
status_led="$board:green:run"
;;
awapn2403|\
dir-645|\
sk-wb8|\
wrh-300cr)
status_led="$board:green:wps"
;;
cf-wr800n|\
psg1208)
status_led="$board:white:wps"
;;
psg1218)
status_led="$board:yellow:status"
;;
cy-swr1100|\
w502u)
status_led="$board:blue:wps"
;;
d240|\
dap-1350|\
na930|\
pbr-m1|\
rt-n13u|\
rt-n14u|\
rt-n15|\
rt-n56u|\
wl-330n|\
wl-330n3g|\
wli-tx4-ag300n|\
wt3020|\
y1|\
y1s)
status_led="$board:blue:power"
;;
db-wrt01|\
esr-9753|\
pbr-d1)
status_led="$board:orange:power"
;;
f5d8235-v1)
status_led="$board:blue:wired"
;;
f5d8235-v2)
status_led="$board:blue:router"
;;
f7c027|\
timecloud)
status_led="$board:orange:status"
;;
hc5*61|\
hc5661a|\
jhr-n805r|\
jhr-n926r|\
mlw221|\
mlwg2)
status_led="$board:blue:system"
;;
linkits7688| \
linkits7688d)
[ "$1" = "upgrade" ] && status_led="mediatek:orange:wifi"
;;
m2m)
status_led="$board:blue:wifi"
;;
m3|\
m4|\
miwifi-nano)
status_led="$board:blue:status"
;;
miwifi-mini|\
zte-q7)
status_led="$board:red:status"
;;
mr-102n)
status_led="$board:amber:status"
;;
mr200)
status_led="$board:white:power"
;;
nw718)
status_led="$board:amber:cpu"
;;
newifi-d1)
status_led="$board:blue:status"
;;
omega2| \
omega2p)
status_led="$board:amber:system"
;;
oy-0001|\
sl-r7205|\
zbt-we826)
status_led="$board:green:wifi"
;;
psr-680w)
status_led="$board:red:wan"
;;
px-4885|\
re6500|\
whr-1166d|\
whr-600d|\
widora-neo)
status_led="$board:orange:wifi"
;;
mzk-ex300np|\
rt-n10-plus|\
tew-691gr|\
tew-692gr|\
ur-326n4g|\
ur-336un|\
wf-2881|\
wr512-3gn)
status_led="$board:green:wps"
;;
rb750gr3)
status_led="$board:blue:pwr"
;;
sap-g3200u3)
status_led="$board:green:usb"
;;
v22rw-2x2)
status_led="$board:green:security"
;;
vocore2)
status_led="$board:fuchsia:status"
;;
w306r-v20|\
witi|\
zbt-wr8305rt)
status_led="$board:green:sys"
;;
wcr-1166ds|\
whr-300hp2|\
wsr-1166|\
wsr-600)
status_led="$board:green:power"
;;
wcr-150gn|\
wl-351)
status_led="$board:amber:power"
;;
whr-g300n|\
wlr-6000)
status_led="$board:red:power"
;;
wzr-agl300nh)
status_led="$board:green:router"
;;
wizfi630a)
status_led="$board::run"
;;
wrtnode2r | \
wrtnode2p | \
wrtnode)
status_led="wrtnode:blue:indicator"
;;
zbt-cpe102)
status_led="$board:green:4g-0"
;;
esac
}
set_state() {
get_status_led $1
case "$1" in
preinit)
status_led_blink_preinit
;;
failsafe)
status_led_blink_failsafe
;;
upgrade | \
preinit_regular)
status_led_blink_preinit_regular
;;
done)
status_led_on
;;
esac
}