93bfac468e
initramfs is not the proper name for this, as it stores a boot ramdisk and not a filesystem. Update the name to reflect it's usage correctly. If CMDLINE_OVERRIDE is enabled, the chosen bootargs aren't used at all. Drop them from the device tree source file to not cause confusion. Remove the noinitrd bootarg. Due to the empty ramdisk this parameter isn't required any longer: [ 0.000000] Initrd not found or empty - disabling initrd Use the LEDE mtd-mac-address* device tree properties to set the interfaces MAC-Addresses. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
228 lines
4.3 KiB
Text
228 lines
4.3 KiB
Text
/*
|
|
* Aerohive HiveAP-330 Device Tree Source
|
|
*
|
|
* Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/include/ "fsl/p1020si-pre.dtsi"
|
|
/ {
|
|
model = "Aerohive HiveAP-330";
|
|
compatible = "aerohive,hiveap-330";
|
|
|
|
chosen {
|
|
bootargs-override = "console=ttyS0,9600";
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
board_lbc: lbc: localbus@ffe05000 {
|
|
reg = <0 0xffe05000 0 0x1000>;
|
|
ranges = <0x0 0x0 0x0 0xec000000 0x4000000>;
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x4000000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x40000>;
|
|
label = "dtb";
|
|
};
|
|
|
|
partition@40000 {
|
|
reg = <0x40000 0x40000>;
|
|
label = "initrd";
|
|
};
|
|
|
|
partition@80000 {
|
|
reg = <0x80000 0x27c0000>;
|
|
label = "rootfs";
|
|
};
|
|
|
|
partition@2840000 {
|
|
reg = <0x2840000 0x800000>;
|
|
label = "kernel";
|
|
};
|
|
|
|
partition@3040000 {
|
|
reg = <0x3040000 0xec0000>;
|
|
label = "stock-jffs2";
|
|
read-only;
|
|
};
|
|
|
|
hwinfo: partition@3f00000 {
|
|
reg = <0x3f00000 0x20000>;
|
|
label = "hw-info";
|
|
read-only;
|
|
};
|
|
|
|
partition@3f20000 {
|
|
reg = <0x3f20000 0x20000>;
|
|
label = "boot-info";
|
|
read-only;
|
|
};
|
|
|
|
partition@3f40000 {
|
|
reg = <0x3f40000 0x20000>;
|
|
label = "boot-info-backup";
|
|
read-only;
|
|
};
|
|
|
|
partition@3f60000 {
|
|
reg = <0x3f60000 0x20000>;
|
|
label = "u-boot-env";
|
|
};
|
|
|
|
partition@3f80000 {
|
|
reg = <0x3f80000 0x80000>;
|
|
label = "u-boot";
|
|
read-only;
|
|
};
|
|
|
|
firmware@0 {
|
|
reg = <0x0 0x3040000>;
|
|
label = "firmware";
|
|
};
|
|
};
|
|
};
|
|
|
|
board_soc: soc: soc@ffe00000 {
|
|
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
|
|
|
i2c@3100 {
|
|
tpm@29 {
|
|
compatible = "atmel,at97sc3204t";
|
|
reg = <0x29>;
|
|
};
|
|
|
|
lp5521@32 {
|
|
compatible = "national,lp5521";
|
|
reg = <0x32>;
|
|
clock-mode = /bits/ 8 <2>;
|
|
chan0 {
|
|
chan-name = "hiveap-330:red:tricolor0";
|
|
led-cur = /bits/ 8 <0x2f>;
|
|
max-cur = /bits/ 8 <0x5f>;
|
|
};
|
|
chan1 {
|
|
chan-name = "hiveap-330:green:tricolor0";
|
|
led-cur = /bits/ 8 <0x2f>;
|
|
max-cur = /bits/ 8 <0x5f>;
|
|
};
|
|
chan2 {
|
|
chan-name = "hiveap-330:blue:tricolor0";
|
|
led-cur = /bits/ 8 <0x2f>;
|
|
max-cur = /bits/ 8 <0x5f>;
|
|
};
|
|
};
|
|
|
|
/* Most likely SoC boot config */
|
|
eeprom@51 {
|
|
compatible = "eeprom";
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
|
|
mdio@24000 {
|
|
phy0: ethernet-phy@0 {
|
|
interrupts = <3 1 0 0>;
|
|
reg = <0x1>;
|
|
};
|
|
|
|
phy1: ethernet-phy@1 {
|
|
interrupts = <2 1 0 0>;
|
|
reg = <0x2>;
|
|
};
|
|
};
|
|
|
|
mdio@25000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio@26000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
enet0: ethernet@b0000 {
|
|
status = "okay";
|
|
phy-handle = <&phy0>;
|
|
phy-connection-type = "rgmii-id";
|
|
mtd-mac-address = <&hwinfo 0>;
|
|
};
|
|
|
|
enet1: ethernet@b1000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
enet2: ethernet@b2000 {
|
|
status = "okay";
|
|
phy-handle = <&phy1>;
|
|
phy-connection-type = "rgmii-id";
|
|
mtd-mac-address = <&hwinfo 0>;
|
|
mtd-mac-address-increment = <1>;
|
|
};
|
|
|
|
gpio0: gpio-controller@fc00 {
|
|
};
|
|
|
|
usb@22000 {
|
|
phy_type = "ulpi";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
usb@23000 {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pci0: pcie@ffe09000 {
|
|
reg = <0x0 0xffe09000 0x0 0x1000>;
|
|
ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0x0 0xffc30000 0x0 0x10000>;
|
|
pcie@0 {
|
|
ranges = <0x2000000 0x0 0xa0000000
|
|
0x2000000 0x0 0xa0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
pci1: pcie@ffe0a000 {
|
|
reg = <0x0 0xffe0a000 0x0 0x1000>;
|
|
ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>;
|
|
pcie@0 {
|
|
ranges = <0x2000000 0x0 0xc0000000
|
|
0x2000000 0x0 0xc0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
buttons {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "Reset button";
|
|
gpios = <&gpio0 8 1>; /* active low */
|
|
linux,code = <0x198>; /* KEY_RESTART */
|
|
};
|
|
};
|
|
};
|
|
/include/ "fsl/p1020si-post.dtsi"
|