openwrtv3/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c
John Crispin 22c5f96c6b ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
Some u-boot versions for QCA955x change the delays based on the link speed
during boot. This usually breaks the support of other linkspeeds when
OpenWrt is booted. It also conflicts with the
at803x_platform_data::fixup_rgmii_tx_delay. OpenWrt has to set its own
values in QCA955X_GMAC_REG_ETH_CFG.

The default RGMII values from the Atheros u-boot are currently used to
preset the existing mach files. These may have to be adjusted for boards
using different values but which are not currently set them explicitely in
OpenWrt.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Christian Beier <cb@shoutrlabs.com>
Cc: Chris R Blake <chrisrblake93@gmail.com>
Cc: Benjamin Berg <benjamin@sipsolutions.net>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Cc: Matthias Schiffer <mschiffer@universe-factory.net>
Cc: Dirk Neukirchen <dirkneukirchen@web.de>
Cc: Christian Mehlis <christian@m3hlis.de>
Cc: Luka Perkov <luka@openwrt.org>
Cc: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 49029
2016-03-16 09:27:08 +00:00

181 lines
4.8 KiB
C

/*
* TRENDnet TEW-823DRU board support
*
* Copyright (C) 2015 Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
* Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "pci.h"
#include "dev-gpio-buttons.h"
#include "dev-eth.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define TEW_823DRU_GPIO_LED_POWER_ORANGE 14
#define TEW_823DRU_GPIO_LED_POWER_GREEN 19
#define TEW_823DRU_GPIO_LED_PLANET_GREEN 22
#define TEW_823DRU_GPIO_LED_PLANET_ORANGE 23
#define TEW_823DRU_GPIO_BTN_WPS 16
#define TEW_823DRU_GPIO_BTN_RESET 17
#define TEW_823DRU_KEYS_POLL_INTERVAL 20 /* msecs */
#define TEW_823DRU_KEYS_DEBOUNCE_INTERVAL \
(3 * TEW_823DRU_KEYS_POLL_INTERVAL)
#define TEW_823DRU_WMAC_CALDATA_OFFSET 0x1000
#define TEW_823DRU_LAN_MAC_OFFSET 0x04
#define TEW_823DRU_WAN_MAC_OFFSET 0x18
static struct gpio_led tew_823dru_leds_gpio[] __initdata = {
{
.name = "trendnet:green:power",
.gpio = TEW_823DRU_GPIO_LED_POWER_GREEN,
.active_low = 1,
},
{
.name = "trendnet:orange:power",
.gpio = TEW_823DRU_GPIO_LED_POWER_ORANGE,
.active_low = 1,
},
{
.name = "trendnet:green:planet",
.gpio = TEW_823DRU_GPIO_LED_PLANET_GREEN,
.active_low = 1,
},
{
.name = "trendnet:orange:planet",
.gpio = TEW_823DRU_GPIO_LED_PLANET_ORANGE,
.active_low = 1,
},
};
static struct gpio_keys_button tew_823dru_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = TEW_823DRU_KEYS_DEBOUNCE_INTERVAL,
.gpio = TEW_823DRU_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "WPS button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = TEW_823DRU_KEYS_DEBOUNCE_INTERVAL,
.gpio = TEW_823DRU_GPIO_BTN_WPS,
.active_low = 1,
},
};
/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
static struct ar8327_pad_cfg tew_823dru_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
};
/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
static struct ar8327_pad_cfg tew_823dru_ar8327_pad6_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
.rxclk_delay_en = true,
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
};
static struct ar8327_platform_data tew_823dru_ar8327_data = {
.pad0_cfg = &tew_823dru_ar8327_pad0_cfg,
.pad6_cfg = &tew_823dru_ar8327_pad6_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.port6_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
};
static struct mdio_board_info tew_823dru_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &tew_823dru_ar8327_data,
},
};
static void __init tew_823dru_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
u8 lan_mac[ETH_ALEN];
u8 wan_mac[ETH_ALEN];
ath79_parse_ascii_mac(mac + TEW_823DRU_LAN_MAC_OFFSET, lan_mac);
ath79_parse_ascii_mac(mac + TEW_823DRU_WAN_MAC_OFFSET, wan_mac);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_823dru_leds_gpio),
tew_823dru_leds_gpio);
ath79_register_gpio_keys_polled(-1, TEW_823DRU_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tew_823dru_gpio_keys),
tew_823dru_gpio_keys);
ath79_register_wmac(art + TEW_823DRU_WMAC_CALDATA_OFFSET, lan_mac);
ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
mdiobus_register_board_info(tew_823dru_mdio0_info,
ARRAY_SIZE(tew_823dru_mdio0_info));
ath79_register_mdio(0, 0x0);
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
/* GMAC0 is connected to the RMGII interface */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x56000000;
ath79_register_eth(0);
/* GMAC1 is connected to the SGMII interface */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_pll_data.pll_1000 = 0x03000101;
ath79_register_eth(1);
ath79_register_usb();
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_TEW_823DRU, "TEW-823DRU", "TRENDnet TEW-823DRU",
tew_823dru_setup);