openwrtv3/target/linux/mvebu/patches-3.10/0148-mtd-nand-pxa3xx-Move-the-data-buffer-clean-to-prepar.patch
Luka Perkov c9ae111a20 mvebu: backport mainline patches from kernel 3.13
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.12, and Linux v3.13.
This work mainly covers:

* Finishes work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c)
  between the PXA family, and the Armada family.
* timer initialization update, and access function for the Armada family.
* Generic IRQ handling backporting.
* Some bug fixes.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39566
2014-02-11 02:07:44 +00:00

69 lines
2.3 KiB
Diff

From 1c0aed9b4cfb7bb891aab07a429436d017ac4d7c Mon Sep 17 00:00:00 2001
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Thu, 14 Nov 2013 18:25:34 -0300
Subject: [PATCH 148/203] mtd: nand: pxa3xx: Move the data buffer clean to
prepare_start_command()
To allow future support of multiple page reading/writing, move the data
buffer clean out of prepare_set_command().
This is done to prevent the data buffer from being cleaned on every command
preparation, when a multiple command sequence is implemented to read/write
pages larger than the FIFO size (2 KiB).
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -609,6 +609,9 @@ static void set_command_address(struct p
static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
{
+ struct pxa3xx_nand_host *host = info->host[info->cs];
+ struct mtd_info *mtd = host->mtd;
+
/* reset data and oob column point to handle data */
info->buf_start = 0;
info->buf_count = 0;
@@ -633,6 +636,19 @@ static void prepare_start_command(struct
info->ndcb2 = 0;
break;
}
+
+ /*
+ * If we are about to issue a read command, or about to set
+ * the write address, then clean the data buffer.
+ */
+ if (command == NAND_CMD_READ0 ||
+ command == NAND_CMD_READOOB ||
+ command == NAND_CMD_SEQIN) {
+
+ info->buf_count = mtd->writesize + mtd->oobsize;
+ memset(info->data_buff, 0xFF, info->buf_count);
+ }
+
}
static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
@@ -674,16 +690,11 @@ static int prepare_set_command(struct px
info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
set_command_address(info, mtd->writesize, column, page_addr);
- info->buf_count = mtd->writesize + mtd->oobsize;
- memset(info->data_buff, 0xFF, info->buf_count);
break;
case NAND_CMD_SEQIN:
set_command_address(info, mtd->writesize, column, page_addr);
- info->buf_count = mtd->writesize + mtd->oobsize;
- memset(info->data_buff, 0xFF, info->buf_count);
-
break;
case NAND_CMD_PAGEPROG: