4f74957584
This adds the patches to get fairly complete Gemini support
using kernel v4.14. It is mainly a backport of patches from
kernel v4.16 with omissions of things like graphics that require
substantial changes and will be better handled once we move
to the v4.16 kernel proper.
On top of this are some WIP patches for USB support.
Tested on Raidsonic NAS4220B and D-link DNS-313.
ChangeLog v4->v5:
- Fix ethernet single gmac usecase
- Fix USB reset (patch from Hans)
- Fix Raidsonic ethernet skew delay
- Fix kernel config (bridge, squashfs, jffs2, usb)
- Disable second usb port on Raidsonic board until fotg210_hcd is fixed
ChangeLog v3->v4:
- Make sure to use tabs rather than spaces in base-files.
- Use the dns313 image tool from the firmware-utils.
- Break out the addition of the v4.14 patches and the removal
of the v4.4 patches to separate (big) patches.
ChangeLog v2->v3:
- Update the kernel config as indicated by Hauke Martens:
- Regenerate again after rebasing using kernel_oldconfig
dropping a few optimization settings that are now generic
- Drop CFG80211 stuff (module)
- Drop CIFS stuff (module)
- Drop MAC80211 (module)
- Drop wireless drivers (module)
- Enabled OverlayFS
- Added proper DNS-313 boot image generation with the special
file header tool.
- Disable CMA in the kernel
- Enable LZMA compression of the kernel
- Consequently name the nas4220b images nas4220b
- Update preinit MAC detection script to handle also DNS-313
- Add board.d/03_hdparm to set the disk to spin down after
1 minute by default, if we have the hdparm tool installed
ChangeLog v1->v2:
- Processed config through kernel_oldconfig
- Processed patches through make target/linux/{clean,refresh} V=99
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Roman Yeryomin <roman@advem.lv>
31 lines
1 KiB
Diff
31 lines
1 KiB
Diff
From 731a2896e11b4e6a8d252e6c14edb1b09dbfcd46 Mon Sep 17 00:00:00 2001
|
|
From: Hans Ulli Kroll <ulli.kroll@googlemail.com>
|
|
Date: Sat, 14 Apr 2018 18:49:57 +0200
|
|
Subject: [PATCH 1/2] usb: host: fotg2: restart hcd after port reset
|
|
|
|
on Gemini SoC FOTG2 stalls after port reset
|
|
rerstart the hcd.
|
|
|
|
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
|
|
---
|
|
drivers/usb/host/fotg210-hcd.c | 4 ++++
|
|
1 file changed, 4 insertions(+)
|
|
|
|
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
|
|
index 2acc51b0be5a..bc9efb49adc7 100644
|
|
--- a/drivers/usb/host/fotg210-hcd.c
|
|
+++ b/drivers/usb/host/fotg210-hcd.c
|
|
@@ -1658,6 +1658,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
|
|
/* see what we found out */
|
|
temp = check_reset_complete(fotg210, wIndex, status_reg,
|
|
fotg210_readl(fotg210, status_reg));
|
|
+
|
|
+ /* restart schedule */
|
|
+ fotg210->command |= CMD_RUN;
|
|
+ fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
|
|
}
|
|
|
|
if (!(temp & (PORT_RESUME|PORT_RESET))) {
|
|
--
|
|
2.16.2
|
|
|